BMW Motorrad DWA 5 Manual de usuario
BMW Motorrad
Supplementary Rider’s Manual
(US-Model)
DWA Anti-Theft Alarm 5
Precautionary rules and mea-
sures that protect the driver
or other persons from injuries
or death.
Special information and
precautionary measures which
prevent damage to the motor-
cycle. Failure to observe these
measures can lead to the war-
ranty being voided.
Special information on better
handling during operating,
checking and adjustment pro-
cedures, as well as during care
work.
Note the following!
DWA_5_2_enu.book Seite 42 Donnerstag, 3. März 2005 8:35 08
1
Introduction
i
Welcome to BMW
Congratulations on your
purchase of this BMW anti-theft
alarm.
It acts as a deterrent for poten-
tial thieves, while at the same
time being easy and straightfor-
ward to use.
Your authorized BMW motorcy-
cle retailer will be glad to assist
you in all matters relating to
your motorcycle.
We hope you will enjoy familiari-
zing yourself with these instruc-
tions for use, and we would like
to take this opportunity to send
you our very best wishes.
Yours sincerely,
BMW Motorrad
Welcome to BMW
DWA_5_2_enu.book Seite 1 Donnerstag, 3. März 2005 8:35 08
2
Introduction
i
i Introduction
Welcome to BMW ................. 1
General ................................. 3
1 Overview and operation
Controls ................................ 4
Functions of remote
control unit............................ 5
Code card ............................. 6
2 Immobilizer
Activation .............................. 7
Deactivation .......................... 9
3 Alarm function
Activation ............................ 10
Activation phases................ 12
Triggering alarm .................. 13
Deactivation ........................ 14
Reasons for
an alarm .............................. 16
4 Central locking system
Manual operation ................ 19
Remote control unit............. 20
Emergency unlocking.......... 21
Safety shutdown ................. 22
5 Lights
Lights.................................. 23
6 Programming
Adapting anti-theft alarm..... 24
Default settings ................... 25
Accessing the
programming mode ............ 26
Programming ...................... 27
Exiting programming
mode .................................. 28
7 Remote controls
Registering
remote controls................... 29
Exiting registration mode .... 32
Synchronizing remote
control unit.......................... 33
8 Care and maintenance
Changing battery ................ 34
9 Technical data
Technical data .................... 36
i Index
Index................................... 37
Contents
DWA_5_2_enu.book Seite 2 Donnerstag, 3. März 2005 8:35 08
3
Introduction
i
Any attempt to move the motor-
cycle, change its position, start
it without your permission, or
disconnect the battery will trig-
ger the alarm. The sensitivity of
the system is set in such a way
that slight vibrations of the
motorcycle will not trigger a
false alarm.
Once you have activated the
alarm, any attempted theft is
indicated acoustically by the
siren and visually by all four turn
indicators flashing at the same
time, and the integrated immo-
bilizer suppresses engine star-
ting.
Your anti-theft alarm is combi-
ned with a central locking sys-
tem that enables you to open
and close the cases, the top-
case, and the radio compart-
ment by remote control.
It also enables you to switch on
the map-reading light and the
ground lights automatically.
You can customize the anti-
theft alarm in certain ways to
suit your needs and prefe-
rences.
In order to protect the motorcy-
cle’s battery and ensure that
the engine can be started, the
alarm system deactivates itself
automatically a certain number
of days after being activated, al-
though it always remains active
for at least 7 days.
General
DWA_5_2_enu.book Seite 3 Donnerstag, 3. März 2005 8:35 08
4
Overview and operation
1
1Left button (ribbed)
2Right button
3LED
4Radio remote control unit
5Status LED
(on the vehicle)
Never lock the ignition key in
the storage compart-
ments with the remote control.
If the remote control is lost, you
can neither unlock the cases
with the emergency function
nor deactivate the immobilizer
without the ignition key.
Controls
1
4
5
2
3
DWA_5_2_enu.book Seite 4 Donnerstag, 3. März 2005 8:35 08
5
Overview and operation
1
Functions of remote control unit
Operation Button 1 Confirmation
Press once Lock central locking –
Press again Activate alarm func-
tion and immobilizer
Turn indicators flash
2x Alarm tone
sounds 2x (if pro-
grammed)
Press for third time Deactivate motion
sensor (for transport,
for example)
Turn indicators flash
3x Alarm tone
sounds 3x
Operation Button 2 Confirmation
Press once Deactivate alarm
function and immo-
bilizer, unlock cen-
tral locking
Turn indicators flash
1x Alarm sounds 1x
(if programmed)
Press again – –
Press for third time – –
Radio-operated systems or de-
vices, which transmit over the
same frequency as your remote
control can interfere with its oper-
ation.
If you experience corresponding
problems, point the remote con-
trol at the motorcycle from anoth-
er direction.
DWA_5_2_enu.book Seite 5 Donnerstag, 3. März 2005 8:35 08
6
Overview and operation
1
Code card
The anti-theft alarm is supplied
complete with a sealed enve-
lope containing a code card 1.
The number stated on the code
card (remove the adhesive
label) is the code for deactiva-
ting the anti-theft alarm by
means of the ignition (b17).
We recommend carrying the
code card together with the
vehicle papers.
The code number is stamped in
encrypted form on the anti-theft
alarm and it is also printed on
an adhesive label 2supplied
with the anti-theft alarm. You
should affix the label at a con-
cealed location on the motorcy-
cle.
If you forget the code and are
unable to find the code card, an
authorized BMW motorcycle
retailer will be able to forward
the encrypted number to BMW
on your behalf and obtain the
correct code.
2
1
DWA_5_2_enu.book Seite 6 Donnerstag, 3. März 2005 8:35 08
7
Immobilizer
2
If the immobilizer is active, the
motorcycle can not even be
started with an authorized key.
The activation of the immobili-
zer can be recognized from the
fact that LED 5lights up after
the ignition is switched on and
the pre-ride checks are com-
pleted.
The immobilizer and the alarm
function are activated together
with the remote control.
The automatic activation of the
immobilizer after the ignition is
switched off (factory setting) is
possible without activating the
alarm function (b26).
Activation
The immobilizer is activated
●by pressing button 1on the
remote control twice (including
alarm function)
or
●by switching off the ignition, if
programmed (b26)
After the ignition is switched off,
50 seconds pass until the acti-
vation phase is carried out.
Activation
1 2
5
DWA_5_2_enu.book Seite 7 Donnerstag, 3. März 2005 8:35 08
8
Immobilizer
2
Activation
The activation of the immobili-
zer after the ignition is switched
off without the alarm function is
confirmed
●by the turn indicators flashing
once
and
●by the alarm tone sounding
once, if programmed (b26)
The activation of the immobili-
zer including the alarm function
by the remote control is confir-
med
●by the turn indicators flashing
twice
and
●by the alarm tone sounding
twice, if programmed (b26)
If the confirmation is followed by
the alarm tone sounding four
times, the anti-theft alarm indi-
cates that its internal battery is
discharged. The battery of the
anti-theft alarm is charged via
the onboard electrical system
so that a discharged vehicle
battery may be the cause of this
problem. When the battery of
the anti-theft alarm is dischar-
ged, disconnecting the vehicle
battery will not trigger an alarm.
If the sounding of the alarm
tone four times continues to
occur even after a longer drive,
please contact your BMW
motorcycle retailer.
DWA_5_2_enu.book Seite 8 Donnerstag, 3. März 2005 8:35 08
Otros manuales para DWA 5
1
Tabla de contenidos
Otros manuales de Mando a distancia de BMW Motorrad
