BluPrints UTKARSH Manual de usuario
||UTKARSH||
UTKARSH
Bluetooth & USB Enabled 3-inch (80mm) Desktop Thermal
Printer with Auto Cutter
For Technical / Installation Related Support:
Mobile: +91 84471 41431, +91 88001 32259
Landline: +91 124 430 0223
Email: [email protected]
Website: www.bluprints.in
KNOW YOUR DEVICE
POWER
SWITCH
The Power switch is located on the front
side of printer. When it pushed to the “_”
side, the printer is switched on; when the
“O” of the switch is pressed, the printer is
switched off.
PAPER FEED - Single Press of the Button
releases (feeds) paper
TEST PRINT –Hold down FEED button and
turn on the printer at the same time to print
self-test: Name, Battery Status,
Communication Mode, Firmware Version
RED –FOR ERROR CONDITIONS:
(Note: 1 Blink = Half Second ON, then OFF)
1. Bluetooth Not Working: Red LED
Blinks once every 3 Seconds
2. Platen Open: Red LED Blinks twice
every 3 Seconds
3. NO Paper: Red LED Blinks four times
after every 3 Seconds
4. Print Head getting Too Hot: Red LED
Blinks eight times after every 3 Sec.
NOTE: If multiple errors occur together,
then the number blinks will add up.
GREEN –FOR POWER ON
RED- Paper detection light, the printer is
out of paper when the light is on. Once
paper is supplied, the light turns off.
FRONT VIEW
REAR VIEW
Note: Network Interface is only available in Premium Model.
INSIDE VIEW
PRINTER SERIAL NUMBER (ON THE LABEL)
DRIVERS / SOFTWARE / APPS AVAILABLE ON WEBSITE
1
SOFTWARE DEVELOPMENT KIT (SDK)
2
USB DRIVER –3 INCHES
3
WEB PRINT APPLICATION (AVAILABLE ON
DEMAND)
4
DEMO APP –BLUPRINTS SMARTPRINT
AVAILABLE ON GOOGLE PLAYSTORE -
https://play.google.com/store/search?q=
bluprints+smart+print&c=apps
https://bluprints.in/
downloads/
ACCESSORIES
1.
24 V / 2Amp 220 VAC Power
Adapter
(BluPrints Branded)
2.
Shielded USB Data Cable –
Type-A to Type-B
4.
Thermal Paper Roll (3 INCHES)
THERMAL PAPER INSTALLATION
Thermal Paper roll can print only on one side. To identify the Thermal side,
scratch the paper roll on both sides. The side which turns black is the
Thermal Side. Keep the paper in such a way that thermal side of the roll is in
contact with the printer head.
GETTING STARTED
1. Once the printer is switched ON, RED LED will blink a few times while
configuring Bluetooth Baud Rate & default parameters of the Printer.
Please wait for this process to be completed before using the Device.
2. If the Printer is not getting switched ON:
a. Check if the Power adapter is properly inserted.
b. Check if the adapter is properly plugged into the mains and its
Red LED is glowing
c. Press FEED Button continuously while turning ON the Power
Switch for 3-5 Sec to get test print
3. Test Print shows following important information:
a. Bluetooth Name (e.g.BTprinter1234), which will show on your
Bluetooth Phone / tab / laptop.
b. Firmware version
c. Communication: shows Bluetooth/USB if both modes are
working. It will not show the mode(s) that is/are not working.
4. Bluetooth Passwords for pairing (if required): 1234 or 0000
5. Use proper USB Shielded data cables for proper printing using USB.
6. If the cutter gets stuck, turn off the power and restart the Printer. If
the cutter is still stuck, then remove this front cover by pulling from
both the sides and bring the cutter back in place manually, by rotating
the gear.
MAIN FEATURES
1. Easy to use device with High Print Quality with low noise.
2. The Printer is Compatible with ESC/POS Instruction Set.
3. The Printer Supports USB, Bluetooth Interfaces
4. The Printer Supports OPOS –OLE for Retail POS, a platform
specific implementation of UnifiedPOS, a Point of Sale standard
for Windows Operating Systems. OPOS standard specifies two
levels for an OPOS control, control object which presents an
abstract H/W interface to receipt printer and service object,
which handles interface between control object and printer.
5. The Characters can be enlarged, Made Bold and Underlined.
6. The printer supports graphic printing.
7. The Printer consumes low power and has very low operational
cost since there is no need for colour tape or ink cartridge.
CONNECTION
Connect the Power Adapter as per following diagram:
SAFETY WARNINGS
1. Do not touch Paper cutting or tearing knives of the Printer.
2. The Print-Head is a heating component. Do not touch the Print-
Head and its surrounding components while printer is still warm.
3. Do not touch the surface of Thermal Print head and connectors,
in order to avoid any electrostatic damage to the Print-Head.
4. Do not Wet the Product or insert any metallic objects into it.
USAGE AND CARE INSTRUCTIONS
5. Use original BluPrints 24 Volts 2Ampere Power adapter to
ensure better printing quality and printer life. Any other adapter
may result in excessive / or low current.
6. Use good quality thermal paper roll (75 GSM) & recommended
paper size rolls for better print quality. Other paper types can
cause jams and potentially cause damage.
7. Avoid contact with water or any conductive material (such as
metal). In case such a thing happens just switch off the device
immediately and get in touch with customer support.
8. Ensure that print command is given only when the paper roll is
present in the printer and not in a stuck position. Otherwise, it
might lead to damage to the printer head.
9. Keep the printer cover closed always to protect it from exposure
to dust & sunlight exposure. Do not try to dismantle the device
on your own.
10. Keep the printer away from devices like microwaves that can
obstruct Wi-Fi or Bluetooth signals.
11. Turn Off the printer when not use it for a long time period.
12. Be sure not to print continuously over 1 meter, otherwise may
cause damage to the printer head.
13. Do not open paper case cover or touch paper roll while printing
or feeding; otherwise, the printer may working properly.
14. Bluetooth Communication Distance should be within 10m, else
it might print junk.
15. Too high (50℃) r too low (10℃) temperature and too high (80%)
or too low (20%) relative humidity both affect Print Quality.
16. Normal thermal paper can’t be kept too long time, if you need
to keep the receipt for a long period, please choose long term
effective thermal paper.
17. Connect the printer’s power adapter to an appropriate
grounding socket. Avoid using the same socket with equipment
that may cause voltage fluctuation of power supply.
GENERAL MAINTENANCE
Your Printer Head Needs Cleaning When:
1. Printing is not clear
2. Some of the columns on the printed receipt are nor clear
3. Feeding the paper is abnormally noisy.
Procedure to clean the Head:
1. Turn off the printer, disconnect the power cord, open the
cover and remove paper roll.
2. If you have just finished printing, wait for the print head to cool
completely.
3. Now dip a soft cotton cloth in petrol/spirit/ethyl alcohol and
clean the thermal printer head to remove the dust.
4. Wipe again with dry cotton cloth and re-test printer.
DETAILS OF CONNECTORS
Note: Network Interface is only available in Premium Model.
WARRANTY & SUPPORT
BluPrints offers 80 plus PAN-India Service Centres for walk-in
resolution to problems for devices in / out of warranty.
The warranty period starts at the time of Product’s original purchase,
and the date of invoice issued to the customer. The Warranty Period is
mentioned on the invoice. If you wish to make a claim under the
Limited Warranty, you may call the support phone numbers (where this
is available and please note national rates apply to calls) and/or where
necessary, return your Product or the affected part (if it is not the
entire Product) to our designated service location. Information about,
our designated service locations can be found at our website
(www.bluprints.in).
Note: If the warranty period is over, service charges and replaced parts
charges shall be applicable.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Impresora de BluPrints
BluPrints
BluPrints SAMPANN ECONOMY Manual de usuario
BluPrints
BluPrints BP3BT Manual de usuario
BluPrints
BluPrints BluMR2BT Manual de usuario
BluPrints
BluPrints BPMR3BT Manual de usuario
BluPrints
BluPrints AEM2BT Manual de usuario
BluPrints
BluPrints BP2BT Manual de usuario
BluPrints
BluPrints PRAGATI REGULAR Manual de usuario
