Blueshark R1 Lite Instrument Display and Function
Charging indicator
Time Display
Fault Code
Pairing Code
Regular Gear
Race Mode
Moving Mode
Lateral
Kickstand
Instruction
On 96V Mode
48V Mode
Turbo available
Turbo unavailable
BS Signal
Indicator
GPS Signal
Indicator
BLE Connect
Indicator
Left/Right Turn
Signa
Ready Indicator
Low Battery
Indicator
Fault Indicator
High /Low Beam
When the turn signal lights up, the corresponding
indicator lights up
The indicator is off in parking mode and on in
riding mode
The indicator lights up when the battery is low.
The system will switch the power supply mode,
and it is necessary to charge the flat battery as
soon as possible.
The indicator lights up when the motorcycle
detects an abnormality.It can be detected again
by switching the Start/Stop switch. If any fault is
detected again, please contact the after-sales
personnel.
The indicator lights up when the high/low beam
lights up.
Start/Stop Switch
When the switch is off, press and hold the button
to switch on with the key close to the motorcycle .
When the switch is on, press and hold the button
to switch off.
Music Player
Indicator
The indicator will light up after the
communication module is connected to the
network
The signal will light up after GPS positioning
After BLE connects to the app,
the indicator lights up
If the motorcycle is equipped with audio, you
can play music through Bluetooth connection
and it will light up for a short time during volume
adjustment
Battery in compartment 1 is discharging
The system will automatically obtain the time
according to GPS, but it can only obtain the time
zone information through the app
After detecting a fault, the system will display the
fault of E***, please check the list for related faults
Gear +- can be used to switch gears. As there are
different power modes, the acceleration and
maximum speed may be different
When the motorcycle enters the pairing mode,
the pairing code will be displayed for APP
authentication
In 96V mode, you can enter the race mode,
which means better starting and acceleration
performance
When engaging this gear, the motorcycle can be
moved forward and backward at low speed
Not ready is displayed when the kickstand is down,
and the driving mode cannot be entered
Battery in compartment 2 is discharging
Note: The motorcycle will actively adjust the power supply mode according to
the service condition of the battery.
None
1
2
Battery status
indicator
Battery
compartment
identification
When the battery is charging: On
07
Vehicle Function & Operations
