BlueParrott C400-XT Manual de usuario

BlueParrott

C400-XT

User Guide

BlueParrott C400-XT User Guide PAGE 2

Safety Information ..................................................................................3

Package Contents ..................................................................................3

Glossary of Terms ..................................................................................4

Headset Overview ..................................................................................5

Charging the Headset ...............................................................................6

• Battery Power Indicators

• Operation While Using the Charger/Adapter

How to Wear ......................................................................................8

• Changing Wearing Styles

• Headset Positioning

Getting Started ....................................................................................9

• On/Off/Standby

• Pairing with a Phone

– NFC Pairing

– Regular Pairing

• Wearing and Adjusting the C400-XT

• Making/Taking Calls

Voice Commands..................................................................................12

Parrott ButtonTM ...................................................................................13

Advanced Features and Functions .....................................................................14

• Multiple Device Pairing and Multipoint Mode

• Proximity Pairing

• Additional Features and Functions

– Last Number Redial

– Call Waiting/Rejecting a Call

– Rejecting a Call

– Phone Voice Control

– Muting

– Transferring Audio

– Turn Headset Indicator Lights On/Off

• Reset Headset Paired Devices List

• Reset Parrott Button Defaults

Functions & Indicators Table .........................................................................17

Specifications ....................................................................................18

TABLE OF CONTENTS

BlueParrott C400-XT User Guide PAGE 3

SAFETY INFORMATION

IMPORTANT SAFETY NOTE: Prolonged exposure to high volume levels can damage your hearing. To avoid

injury, set the volume to the lowest comfortable level. If you experience ringing in your ears, or voices sound

muffled, stop using the headset. Avoid turning up the volume to block noisy surroundings. It’s possible for

your ears to adapt to volume that is too high, and this could result in permanent hearing damage without

any noticeable discomfort.

• Check with local and state laws regarding cell phone/headset usage while operating a motor vehicle.

• Do not immerse any part of this product in water.

• Plastic bags and small parts may cause choking if ingested. Keep them away from small children and pets.

• Use only the power cords included with this product.

• Avoid temperatures exceeding 140° F (will cause equipment failure).

PACKAGE CONTENTS

A. C400-XT Headset

B. Over-The-Head Wearing Style

C. Behind-the-Neck Wearing Styles (Left & Right)

D. Leatherette Ear Cushion*

E. Spare Foam Ear Cushion

Images are not shown to scale.

F. Spare Microphone Windscreen

G. USB Charging Cable

H. Auto Adapter

I. Quick-Start Guide*

J. Warranty and Compliance Insert*

*Not pictured.

BlueParrott C400-XT User Guide PAGE 4

GLOSSARY OF TERMS

On: Headset is on, but there is no connection to the phone (red light will flash).

MFB: Abbreviation for “Multifunction Button.”

Multipoint Mode: Multipoint Mode allows you to connect and switch between two Bluetooth devices.

Paired: Two Bluetooth devices agree to communicate with one another.

Standby Mode: Headset is on, Bluetooth link is active, and the user is not on a call (blue light will flash).

Talk Mode: Headset is in use with the cell phone while the cell phone is on an active call (blue light will flash).

A2DP: Advanced Audio Distribution Profile is a Bluetooth protocol for streaming audio other than call audio,

e.g. music or GPS directions.

BlueParrott C400-XT User Guide PAGE 5

HEADSET OVERVIEW

A. Flexible Microphone Boom

B. Volume Down

C. Volume Up/Mute

D. Multifunction Button (MFB)

E. Indicator Lights

F. Parrott ButtonTM E

BlueParrott C400-XT User Guide PAGE 6

CHARGING THE HEADSET

Connect the USB charging cable into the

headset’s USB charging port. If the headset is

not fully charged, the indicator will turn red.

When the indicator turns blue and stays blue,

the unit is fully charged. A fully discharged

battery will need approximately 3.5 hours to

achieve a complete charge.

Battery Power Indicators

While charging, the MFB’s indicator light

shows the level of battery power on your

C400-XT as follows:

Blue light: Fully charged. Over 24 hours’

talk time.

Red light: Less than a full charge.

For best performance, keep charging

headset when not in use.

Headset

Charging Port

Auto (DC) Charger

Indicator Lights

BlueParrott C400-XT User Guide PAGE 7

CHARGING THE HEADSET (continued)

Operation While Using the Charger/Adapter

The C400-XT headset will operate from battery power or from power supplied via the USB cable.

NOTE: Do not attach the USB cable to a powered USB port mid-call. This will cause the headset to reset,

and the call will be sent back to the phone.

When the headset is operating from the battery, all indicator lights and sounds will function as described in

this guide.

When the headset is operating from power supplied via the USB cable, the headset—including the audio

indicators—will function as described in this user guide. However, the MFB lights will indicate the battery

charge status.

While the headset is on the charger, press the MFB long enough to power the unit on. The headset should

reconnect automatically unless your phone is set to “always ask” for connection requests.

After the battery is fully charged, the MFB charge light will turn blue and stay blue as long as a powered

USB cable is connected to the headset. While the headset is fully charged and the charge light is blue, the

blue indicator light will also be on if the headset is powered on.

BlueParrott C400-XT User Guide PAGE 8

HOW TO WEAR

Wearing Options: Find Your Fit

The C400-XT headset is supplied with a choice of Over-The-Head and Behind-The-Neck wearing styles:

1) Attach the headset to the wearing style as shown.

2) Add leatherette or foam ear cushion.

Note: Both left and right versions of the

Behind-the-Neck style are included;

the Over-the-Head style is reversible

for either left or right use.

Wearing and Adjusting the C400-XT

To get the best noise-canceling performance,

position the microphone near the corner of

your mouth. Positioning is important; small

adjustments in microphone placement can

improve performance.

1) Place the headset on your head.

2) Position the speaker directly on your ear.

You can slide the headband in or out of the

side support for proper fit.

3) Position the microphone about one finger’s

width away from your face at the corner of

your mouth.

4) The headband can be adjusted by gently

flexing it outward to loosen or inward to tighten.

BlueParrott C400-XT User Guide PAGE 9

GETTING STARTED

On/Off/Standby

Turn Headset On: Hold down the MFB for approximately 2-3 seconds until you hear a voice prompt,

“power on.” The red light will flash once every second.

Turn Headset Off (conserves battery power): Hold down the MFB for approximately 4–5 seconds

until you hear a voice prompt “power off.” A red light will flash 4 times and the headset will turn off.

Standby Mode: Once the headset is turned on (after the initial pairing), it will attempt to connect to

the last device that it was paired with, putting itself into Standby Mode.

Pairing with a Phone

When you turn your C400-XT on for the first time, or if its

Paired Device List has been cleared, it will go into pairing

mode automatically. You can pair the headset using NFC

or manually.

NFC (One-Touch) Pairing

1. Make sure that NFC is enabled on your cell phone.

2. Place the NFC zone of your cell phone against the NFC

zone of the headset and hold them together until your

cell phone registers the headset.

3. Follow the prompts on your cell phone to complete

pairing.

Note: NFC and One-Touch Pairing are dependent on your

cell phone. The size and sensitivity of your phone’s NFC

zone and the specific way to connect the headset may

vary between devices.

NFC Zone

BlueParrott C400-XT User Guide PAGE 10

Manual Pairing

If the C400-XT has already been paired with another device and you are not going to use NFC Pairing,

you will need to put it into Pairing Mode manually:

Placing Headset into Pairing Mode

By Voice:

Activate headset voice recognition by pressing the Parrott Button or by pressing and holding the Volume

Up button. Then, after the prompt, say “pair mode.” The headset will enter pairing mode and be visible for

pairing to devices for 120 seconds.

Using Buttons:

With the headset powered off, press the MFB until the light rapidly flashes blue and you hear the audio

prompt “power on.” Keep holding the MFB for approximately 10 seconds until you hear “Pair Mode.”

The headset will be visible for pairing to devices for 120 seconds.

Pairing to a Cell Phone

1. Make sure that other Bluetooth devices are turned off or out of range.

2. Place the headset into pairing mode.

3. Put your cell phone in Bluetooth Search/Scan Mode per the manufacturer’s instructions.

4. Select “BP C400-XT” to pair. (Passcode is “0000” if needed.)

5. Accept the phone book access request to enable caller ID in the headset.

6. When connected, the headset will give you the voice prompt, “Your headset is connected.”

GETTING STARTED (continued)

Otros manuales para C400-XT

Tabla de contenidos

Otros manuales de Auriculares de BlueParrott

BlueParrott

BlueParrott B450-XT MS Hoja de especificaciones

BlueParrott

BlueParrott B250-XT Manual de usuario

BlueParrott

BlueParrott C400-XT Manual de usuario

BlueParrott

BlueParrott S450-XT Manual de usuario

BlueParrott

BlueParrott VXi Reveal Manual de usuario

BlueParrott

BlueParrott B350-XT Manual de usuario

BlueParrott

BlueParrott C300-XT Manual de usuario

BlueParrott

BlueParrott C300-XT MS Hoja de especificaciones

BlueParrott

BlueParrott B250-XT Manual de usuario

BlueParrott

BlueParrott B350-XT Manual de usuario

BlueParrott

BlueParrott B450-XT Manual de usuario

BlueParrott

BlueParrott M300-XT Manual de usuario

BlueParrott

BlueParrott B450-XT MS Hoja de especificaciones

BlueParrott

BlueParrott M300-XT Manual de usuario

BlueParrott

BlueParrott S450-XT Hoja de especificaciones

BlueParrott

BlueParrott M300-XT Manual de usuario

BlueParrott

BlueParrott B350-XT Manual de usuario

BlueParrott

BlueParrott B250-XTS Manual de usuario

BlueParrott

BlueParrott B450-XT MS Manual de usuario

BlueParrott

BlueParrott C400-XT Manual de usuario

BlueParrott

BlueParrott B250-XT Manual de usuario

BlueParrott

BlueParrott C300-XT Hoja de especificaciones

BlueParrott

BlueParrott C400-XT Hoja de especificaciones

BlueParrott

BlueParrott B350-XT Manual de usuario

Manuales populares de Auriculares de otras marcas

Sena

Sena SMH10 Manual de usuario

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manual de usuario

Sennheiser

Sennheiser EPOS ADAPT 230 Manual de usuario

Doro

Doro Flexus HS2005 Manual de usuario

GE 98971 Manual de usuario

Hama

Hama 00184070 Manual de usuario

Plantronics

Plantronics Blackwire 3200 Series Manual de usuario

Blue Tiger

Blue Tiger Advantage PLUS Manual de usuario

Jawbone

Jawbone Icon Manual de usuario

Jabra

Jabra FR 20 Manual de usuario

Roxcore

Roxcore Flow A+ Manual de usuario

Turtle Beach

Turtle Beach XP 510 Manual de usuario

Philips

Philips SHB6101 Manual de usuario

Jabra

Jabra PRO 9460 Duo Manual de usuario

HyperX

HyperX HyperX Cloud Flight Manual de usuario

Bose

Bose MIE2 Mobile Manual de usuario

Jabra

Jabra Steel Manual de usuario

HyperX

HyperX cloud ii Manual de usuario