bluebit SmashBass Manual de usuario
Wireless Headphone
SmashBass
EN
2
USER MANUAL - SmashBass beta
Bluetooth Headphone
Safely handling of the product
Before using check these instructions!
1. Keep headphone and its accessories
away from small children.
2.Too high volume may damage your hearing
so keep the volume on reasonable level.
3. Use only the charging cable we are
providing.(Voltage of charger must be 5V,
electric current exceed 400mA (5V/400mA)
4.This product should not be stored or used at
temperatures below -15°C or above 55°C.
5. Keep your headphone away from water.
6. Using headphones may affect on your
ability to hear outside sounds. Stop using the
headphone in potentially hazardous situations.
3
Package Includes:
1 x Headphone, 1 x USB cable, 1 x Audio cable
and User Manual
Functions
Volume
Volume
LED Signal light
Multifunctional
button
Previous track
Play /Pause
Next track
Charging port
(micro-USB)
Microphone
Audio cable
port 3.5mm
4
Charging the Headphone
1. Make sure the Headphone has been first
turned off.
2. Plug USB cable into the charging port of the
headphone and the other side of the USB cable
into the USB charger or other charging device.
The red indicator light remains solid when
charging.
3. Charging takes 1.5–2 hours.
When fully charged the red indicator light
switches off. ( if used for lisening music via
Audiocable the blue light remains solid).
Select language
(English, Chinese, French or Spanish)
1. Press Multifunctional button until blue LED
indicator light flashes.
2.Tap both Multifunctional button and Volume –
button once at same time to change in different
language. You hear voice prompt saying which
language is selected.
5
Pair with phone
1. Make sure your headphone are less than one
meter from the bluetooth phone when pairing.
2. Press the Multifunctional button until the blue
light remains solid.
3.Turn the bluetooth on from your mobile
phone’s settings/connections.
4. Headphone appear to you as“H”. Select them
and if required enter passkey”0000”.
(When pairing, headphone is“visible” to your
phone’s bluetooth for 60 seconds at time.)
Disconnect headphone
from phone
You can do one of the next:
Turn off the headphone.
Turn off the bluetooth connection of the phone
you want to disconnect.
Take headphone more than 10m away from the
phone you want to disconnect.
6
Remember to turn off Bluetooth connection of
your phone, if you are not using it anymore with
other devices.
Reconnect the paired headphone
1. Keep pressing Multifunctional button until
blue light blinks.
2.Turn the bluetooth on from your phone.
Headphones are reconnecting automatically
with the last connected phone.
Switch off
Keep press Multifunctional button until blue light
turns off. Remember to turn off the bluetooth of
your phone.
Answer a call
Press Multifunctional button once or use your
phone to answer a call.
7
End a call
Press Multifuntion button once or use your
phone to end a call.
Reject a call
Press Multifuntion button for 2 seconds.
Call waiting
(mobile phone needs to support this function)
When phone 1 is in conversation and there’s
incoming call from phone 2; Press the Multi-
functional button for around 2 seconds,You
can answer the call from phone 2 and keep the
conversation of phone 1.
Last call redialing
Double click the Multifunctional button.
Voice control
(mobile phone needs to support this function)
Keep pressing the Multifunctional button for 2
8
seconds, then release.
Audio sharing
1. Connect the headphone and phone via
Bluetooth.
2. Connect other headphone to the first ones via
Audio cable.
Use Audio cable for listening music
Connect the headphone and phone via audio
cable.(Notice that this mode does not support
calling function.)
Play music
Play/ Pause by pressing lever & push switch
once.
Increase volume by tapping volume + once.
Decrease volume by tapping volume - once.
Go to Previous track by pressing lever up.
Go to Next track by pressing lever down.
9
FAQ
1. Headphone can not be paired with mobile
phone.
• Please check whether your headphone is
in pairing mode or reconnection mode.
• Check whether Bluetooth search function
of your phone is opened.
• Check your mobile device’s Bluetooth
menu and delete/forget the headphone,
reconnect the headphone following
instuctions of user manual.
2. Headphone can not be switched on.
• Please check the battery status of your
headphones.
3. Can I chance the battery for the headphone?
• No, this headphone uses a built-in Li-
Polymer battery. It can not be removed.
4. Can I use headphone while driving?
• For safety reasons we recommend not
to use over-ear headphone to avoid
10
distraction while driving.
5. Headphone disconnect with mobile phone
within 10 meter.
• Check if there is metal or other material
within relatively close range. It may
interfere Bluetooth connection, as
Bluetooth is a radio technology that
is sensitive to objects between the
headphone and the connected device.
6. I can not hear any sound from my
headphone even they are connected via
bluetooth to my phone/computer.
• Check volume of your headphone, and
computer/ mobile phone.
• Check whether the output channel of your
computer is Bluetooth Audio Device and
that Bluetooth function of you computer
supports A2DP profile.
Tabla de contenidos
