Blueant Q3 Manual de usuario
Q3
USER GUIDE
Read Me to Get the Most Out of
Your Device...
TO GET STARTED
1. Turn The Q3 On
2. Put It On
3. Listen In
Model: Q3
Contents
Charge Your Earpiece 6
Wearing the Q3 7
Pair Your Earpiece 7
Use Your Voice to Control the Q3 9
Making Calls 11
Taking Calls 12
Volume Control 13
Changing the Ear Bud 14
Using 2 Phones (Multipoint) 14
Call Waiting and Conferencing* 15
Listening to Audio 16
Reset the Q3 17
Free Android Application 18
Text Message Readout on iPhone 19
Reconnecting to the Earpiece 20
Button Commands 20
Help and Support 22
Terms and Conditions 23
Contact Us 24
5
Welcome to the BlueAnt Q3: the premium smartphone
earpiece, featuring BlueAnt’s intuitive voice user interface.
Designed for sound, style and comfort, the Q3 also comes
with Siri and Google Voice Actions integration, rapid charge
technology to keep you connected, and high defi nition
wideband audio.
Volume
Rocker
Control
Command
Button
Microphones
Indicator Light
Charging Port
6
Charge Your Earpiece
Your earpiece has been given an initial partial charge to get you
started, but for best results we recommend you fully charge it
using the supplied USB cable and adaptor.
> Charge the Q3 whenever it announces that the battery is Very
Low. It will switch off automatically if the battery runs out.
> Your earpiece features Rapid Charge technology. It will
charge to 50% capacity in just 30 minutes (a full charge takes
about 2 hours).
> During charging, the indicator light fl ashes red.
> When the light goes white,
the charge is complete.
> The Q3 features an
iPhone battery meter
so you can check
your battery
status at a glance. Hardware
Power Switch
7
Wearing the Q3
You can wear the Q3 in either ear. For best results:
> Rotate the ear gel as shown here.
> Make sure that the earpiece is angled towards your mouth.
LEFT
EAR
RIGHT
EAR
Pair Your Earpiece
To use the Q3 you need to pair it with your phone.
1. Slide the hardware power switch across to turn the Q3 on
and then put the Q3 in your ear.
2. If this is the fi rst time you have used the Q3 it will go straight
8
to pairing mode. The voice prompts will start to talk you
through the pairing process.
For subsequent pairings, click the Command button and
wait for the Q3 to ask you to Say A Command. Then say Pair
Me.
3. Follow the voice prompts to pair the Q3 with your phone. If
requested, the pairing code is 0000 (four zeros).
Note: If your phone prompts you to allow a connection to the
Q3, you must select “YES” or “OK”.
On Android devices a message about
phonebook access may appear in the
notifi cations area at the top of the
screen. This is to allow access to your
contacts so that the Q3 can announce
caller names.
You must swipe your fi nger over this
message and accept the transfer
request. If you miss this step you will
need to:
1. Delete the Q3 pairing from your phone.
Phonebook Access Request
Notifi cation
shown on
Android
devices
9
2. Power the phone off and back on.
3. Reset your Q3 and pair it with your phone again.
This is due to the way the Android PBAP request system works.
Note: Some other phones may also require you to grant
phonebook access permission. Select “YES” or “OK” when
prompted.
Use Your Voice to Control the Q3
Phone
Commands
3
Say A
Command
21
The Q3 is voice controlled. Simply:
1. Click the Command button
2. Wait for the Q3 to ask you to Say A Command
3. Say the command:
10
Command Description
Am I
Connected?
The Q3 will check if your phone is
connected, and attempt to connect if not.
Call Back Calls back the last incoming call.
Check Battery Tells you the battery level on the Q3.
Pair Me Puts the Q3 into pairing mode. Any
connected phone will be disconnected.
Phone
Commands
Activates your phone’s voice dialing
feature (if supported). Depending on
your phone model, you may need to
record voice tags on the phone to use this
feature.
On the iPhone 5 or iPhone 4S this
command activates Siri.
On Android devices this command
activates Google Voice Actions.
Redial Redials the last outgoing call.
Tabla de contenidos
Otros manuales de Auriculares de Blueant
Blueant
Blueant Z9i Guía de inicio rápido
Blueant
Blueant BLUEANT Z9 Guía de instalación
Blueant
Blueant SuperTooth II Manual de usuario
Blueant
Blueant SuperTooth II Guía de instalación
Blueant
Blueant X3 MICRO Manual de usuario
Blueant
Blueant X5i Manual de usuario
Blueant
Blueant T1 Manual de usuario
Blueant
Blueant CT Manual de usuario
Blueant
Blueant Z9i Manual de usuario
Blueant
Blueant V1 Manual de usuario
Blueant
Blueant Z9i Manual de usuario
Blueant
Blueant Q2 Manual de usuario
Blueant
Blueant T1 Manual de usuario
Blueant
Blueant T8 micro Manual de usuario
Blueant
Blueant Q2 Manual de usuario
Blueant
Blueant V1 Manual de usuario
Blueant
Blueant V12 Guía de instalación
Blueant
Blueant Q3i Manual de usuario
Blueant
Blueant X3 MICRO Manual de usuario
Blueant
Blueant X5 Manual de usuario
