Blue Technix Sentis-ToF-P510 Manual de usuario
BLUETECHNIX
Embedding Ideas
Sentis-ToF –
P510
Quick Start Guide
Version 1
BLUETECHNIX
Embedding Ideas
© Bluetechnix 2015
Bluetechnix
Waidhausenstraße 3/19
A-1140 Vienna
AUSTRIA
www.bluetechnix.com
Sentis-ToF-P510-Quick Start Guide
Document No.: 900-308 / A
Publication date: February 23, 2015
Subject to change without notice. Errors excepted.
This document is protected by copyright. All rights reserved. No part of this document may be reproduced or
transmitted for any purpose in any form or by any means, electronically or mechanically, without expressly
written permission by Bluetechnix GmbH.
Windows is a registered trademark of Microsoft.
BLUETECHNIX
Embedding Ideas
© Bluetechnix 2015
Table of Contents
1Unboxing .......................................................................................................................................... 5
1.1 In the box .................................................................................................................................. 5
1.2 Connecting your Sentis-ToF-P510 Eval-Kit.............................................................................. 5
1.3 Connector Overview ................................................................................................................. 6
1.4 Power Connector (a) ................................................................................................................. 7
1.5 GBit Ethernet Connector (b)...................................................................................................... 7
1.6 Extension Connector (c)............................................................................................................ 8
1.7 Overview of the Test Set-up ..................................................................................................... 9
2Downloading the Evaluation Software ........................................................................................... 10
2.1 Support website...................................................................................................................... 10
2.2 Start-up screen ....................................................................................................................... 11
2.3 Prepare your Network Interface Card (NIC)............................................................................ 11
3Start using your Sentis-ToF-P510 with ‘BltTofSuite’..................................................................... 12
4System Requirements & Support................................................................................................... 15
4.1 Bluetechnix ToF Suite ............................................................................................................. 15
4.2 Support ................................................................................................................................... 15
5Product History .............................................................................................................................. 16
5.1 Version Information ................................................................................................................. 16
5.1.1 Sentis-ToF-P510.............................................................................................................. 16
5.2 Anomalies................................................................................................................................ 16
5.3 Document Revision History .................................................................................................... 16
BLUETECHNIX
Embedding Ideas
© Bluetechnix 2015
© Bluetechnix 2015
All Rights Reserved.
The information herein is given to describe certain components and shall not be considered as a guarantee
of characteristics.
Terms of delivery and rights of technical change reserved.
We hereby disclaim any warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Bluetechnix makes and you receive no warranties or conditions, express, implied, statutory or in any
communication with you. Bluetechnix specifically disclaims any implied warranty of merchantability or fitness
for a particular purpose.
Bluetechnix takes no liability for any damages and errors causing of the usage of this board. The user of this
board is responsible by himself for the functionality of his application. He is allowed to use the board only if he
has the qualification. More information is found in the General Terms and Conditions (AGB).
Information
For further information on technology, delivery terms and conditions and prices please contact Bluetechnix
(http://www.bluetechnix.com).
Warning
Due to technical requirements components may contain dangerous substances.
BLUETECHNIX
Embedding Ideas
Quick Start Guide - Sentis-ToF – P510 Last change: 23 February 2015
Version 0.1
© Bluetechnix 2015 Page 5 | 16
1
Unboxing
1.1 In the box
Sentis-ToF-P510 Evaluation-Board
CAT5/7 Ethernet Cable
Quick Start Guide
Customer Software Package CD
Power Supply *
Netzkabel (Kaltegerätekable)
* Note
The power supply’s operating temperature is specified from 0 to +40°C. This represents not
the effective working temperature of the Sentis-ToF-P510 sensor!
1.2 Connecting your Sentis-ToF-P510 Eval-Kit
Figure 1-2: Sentis-ToF-P510 connector compartment screw positions
BLUETECHNIX
Embedding Ideas
Quick Start Guide - Sentis-ToF – P510 Last change: 23 February 2015
Version 0.1
© Bluetechnix 2015 Page 6 | 16
Figure 1-3: Front panel view
1.3 Connector Overview
a.
Power Supply
b.
GBit Ethernet (RJ45) 10/100/1000 Base-T
c.
Extension Connector
Figure 1-1: Sentis-ToF-P510 connectors and interfaces
Note
Please follow the next steps in the right order to get your ‘Sentis-ToF-P510’ up and running
correctly.
BLUETECHNIX
Embedding Ideas
Quick Start Guide - Sentis-ToF – P510 Last change: 23 February 2015
Version 0.1
© Bluetechnix 2015 Page 7 | 16
1.4 Power Connector (a)
Pin assignment on the power connector:
Connector Type: 2.1mm ID / 5.5mm OD
Voltage: 18-30V
Polarity: This pins are protected against wrong polarity.
Note
Use inherently limited power sources only!
The power supply connector is protected against wrong polarity but the ‘Sentis-ToF-P510’
will not work in case you don’t use the correct polarity! If the Sentis-ToF-P510 doesn’t work
please check the power supply polarity first!
To ensure, that your Sentis-ToF-P510 works correctly, connect the ‘Sentis-ToF-P510’ to a 12-30V DC power
supply using connector (a) and wait for approximately 20 seconds until the camera boots up.
1.5 GBit Ethernet Connector (b)
This standard RJ45 connector provides a 10/100/1000 Base-T interface to the Sentis ToF - P510.
Plug in the Ethernet cable (b) and connect your Sentis-ToF-P510 to your PC.
BLUETECHNIX
Embedding Ideas
Quick Start Guide - Sentis-ToF – P510 Last change: 23 February 2015
Version 0.1
© Bluetechnix 2015 Page 8 | 16
1.6 Extension Connector (c)
The Mini-DIN 8 connector provides several interfaces to connect the Sentis ToF - P510 to external devices.
No. Signal Type Description
1 GND Powe
r
Ground
2 nRESET Input (100k pu) Reset input (active low)
3 TRIGGER_IN Input (100 pd) Trigger input, 10-30
V
4 OWIRE Output External OWIRE interface
5 MOD_P Output External Light modulation signal, differential, positive
6 MOD_N Output External Light modulation signal, differential, negative
7 GPIO In-
/
Output General purpose I/O (galvanic isolated)
8 Reserved - -
Table 1-1: Power connector pin-out
Note:
To use the output functionality of the GPIO pin an external pull-up resistor is necessary. This
pull-up must be designed for a minimum current of 13mA. (e.g 1k5 pull-up to 20V)
8
5
6
7
3
2
1
4
Figure 1-2 Extension Connector (Mini-DIN8) pin out
Description Manufacturer Part Number
Mini-DIN8 plug, male CUI Inc MD-80
Table 1-2: Mating connector
BLUETECHNIX
Embedding Ideas
Quick Start Guide - Sentis-ToF – P510 Last change: 23 February 2015
Version 0.1
© Bluetechnix 2015 Page 9 | 16
1.7 Overview of the Test Set-up
Test Set-up
Figure 1-3: Sentis-ToF-P510 with connected power supply and Ethernet cable
BLUETECHNIX
Embedding Ideas
Quick Start Guide - Sentis-ToF – P510 Last change: 23 February 2015
Version 0.1
© Bluetechnix 2015 Page 10 | 16
2Downloading the Evaluation Software
Please log in to our support website at https://support.bluetechnix.com/ and download the Sentis-ToF-P510
customer software package CD. This package also includes the Bluetechnix ToF-Suite V3.3
2.1 Support website
Figure 2-1: Download Evaluation Package
Please follow the instructions on the WEB-Site
Tabla de contenidos
Otros manuales de Placa madre de Blue Technix
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
