(Insert Classif. of TMDER Here and At Bottom of Page) CLASSIFICATION:
NAVSEA (USER) TECHNICAL MANUAL DEFICIENCY/EVALUATION REPORT (TMDER)
(NAVSEA S0005--AA-- GYD-- 030/TMMP & NAVSEAINST 4160.3)
Instructions: Insert classification at top and bottom of page. Read the following before completing this
form. Continue on 8½Ix11Ipaper if additional space is needed.
1. USE THIS REPORT TO INDICATE DEFICIENCIES, USER REMARKS, AND RECOMMENDATIONS RELATING TO PUBLICATION
2. BLOCKS MARKED WITH ” * ” ARE TO BE FILLED IN BY THE CONTRACTOR BEFORE PRINTING.
3. FOR UNCLASSIFIED TMDER’S FILL IN YOUR RETURN ADDRESS IN SPACE PROVIDED ON THE BACK. FOLD AND TAPE WHERE
INDICATED AND MAIL. (SEE OPNAVINST 5510.1E FOR MAILING CLASSIFIED TMDERS.)
4. FOR ADDITIONAL INFORMATION, CALL AUTOVON 360--- 4809 --- 9084 OR COMMERCIAL 905--- 882 --- 5064
1. NAVSEA NO. * 2. VOL.
PART *
3. TITLE *
4. REV DATE OR TM CH.
DATE
5. SYSTEM/EQUIPMENT 6. IDENTIFICATION/NOMENCLATURE (MK/MOD/AN)
7. USERS EVALUATION OF MANUAL (CHECK APPROPRIATE BLOCKS)
A. EXCELLENT B. GOOD C. FAIR D. POOR E. COM PLETE F. INCOMPLETE
8. GENERAL COMMENTS
9. RECOMMENDED CHANGES TO PUBLICATION
PAGE
NO.
A.
PARA
GRAPH
B.
LINE
NO.
C.
FIG.
NO.
D.
TABLE
E.
F. RECOMMENDED CHANGES AND REASONS
10. ORIGINATOR AND WORK CENTER (PRINT) 11. ORIGINATOR’S RANK, RATE OR GRADE, AND TITLE 12. DATE SIGNED
13. SIGNATURE OF WORK CENTER HEAD 14. SIGNATURE OF DEPARTMENT OFFICER 15. AUTOVON/COMM
NO.
16. SHIP HULL NO. AND/OR STATION ADDRESS (DO NOT ABBREVIATE)
17. THIS SPACE ONLY FOR NSDSA
A.CONTROLNO. B.COGISEA C.DATE D.PRIORITY E.TRANSMITTEDTO
RECEIVED FORWARDED DUE
NAVSEA 9066/10 (REV. 6.85) S/N 0116--- LF --- 090--- 9651 CLASSIFICATION:
(REPLACES 4--- 84 EDITION & NAVSEA 4160/1---
DESTROY STOCK)
