BlitzWolf BW-V2 Manual de usuario
Importer: VISHTEC UK Co.,Ltd
Address: 275 ISLINGTON SUITE 1405 NEW NORTH ROAD
LONDON ENGLAND N1 7AA
Email: [email protected]
importer: VISHTEC ltd
Address: 3 rd oor oce 5, Plovdiv 2 Liuben Karavelov bul,
4002 Bulgaria
Email: [email protected]
Please scan the QR code below to download the multilingual instruction manual from the
ocial website. (including English, German, Italian, French and Spanish)
MADE IN CHINA
BW-V2
English
Deutsch
Français
Español
Italiano
01 - 15
16 - 30
31 - 45
46 - 60
61 - 75
CATALOG
How to use the external mouse?
Remote Control
Instruction of Buttons
01
Power Supply
Note:
Mouse
OK
Right
Volume+
Menu
Home
Up
Left
Down
Volume-
Return
Mute
1.Please keep the remote control aiming at the projector screen.
2.Please take out the batte if the remote control is not used for a long time.
1,Click the left button to enter the menu.
2,Click the right button to return.
Focus
02
File Manager
05
Trapezoidal
11
General settings
11
Connection & Key
02
Upgrade
13
Bluetooth speaker
13
Attention
14
Warranty policy
14
Parameters
15
HDMI
03
Audio
12
Language
12
System
12
Remote Control
01
Shocut
04
WiFi
10
Bluetooth
10
Picture mode
10
Same screen
06 09
Focus
Slide the focus wheel to the left or right to make the picture clear.
Connect the HD cord to the projector and click HDMI on the home screen which will appear in
syncwithin ve seconds.
Connection & Key
Device po.
Focus wheel
Audio inteace USB 2.0
HDMI
Power inteace
Power switch
HDMI
Connect External Multi-media Inteace
1.Plug the Fire TV device into projector HDMI po.
2.Check the Audio setting on your Amazon Fire TV or Fire Stick.
3.lf you're still experiencing audio issues, t turning o Dolby Digital Plus:On your Amazon
Fire TV or Fire Stick, go to Settings> Display & Sounds> Audio> Dolby Digital Output and then
turn Dolby Digital Plus OFF.
Notes:
It can be combined with Amazon Fire TV Stick to connect the projector
HDMI
0302
Shocuts Buttom
Delete the apps you download by pressing and
holding down the ok button for two seconds.
File Explorer
Plesae check the les in File Explorer when you inse U disk or TF card.
Wireless screen (Windows)
1. Please conrm your Windows and projector IP addresses are connected to the same LAN.
2. Use the following link to download and install:
3. Click Esharecent-STD, and the name and IP address of the projection device will appear. Click
"Sta Screen Transmission" to begin using the wireless screen.
You can clean the memo by holding the home
button for two seconds.
Long press the menu key to switch between mouse
mode and remote control mode.
01
02
03
OK
Home
Menu
Windows with screen operation guide
http://cdn.sharemax.cn/app/EShareClient-STD.exe
0504
Airplay (iPhone)
Suppoed by the following devices: iPhone 5 and above, iPad 2 and above, iPod Touch (5th
generation and above).
1.Connect your iPhone and projector to the same --WIFI-- network (5G rst).
iPhone AirPlay mirror operation guide
2.Click to open the projected Airplay, and then Eshare-**** will be displayed in the lower left
corner.
3.Slide your nger from the bottom of the iPhone screen to the top, bringing up a new menu,
and open the iPhone control center (Slide from the top down for iPhone X).
4.Click AirPlay Mirroring and the device list will automatically search for the projected devices
within the same network.
5.From the device list, click the name of the projected device you want to connect to
(Eshare-****) to successfully cast the screen.
Airplay (iPhone)
1.For use without having a LAN or wi available, rst turn on "Settings" -- "Personal Hot spot"
- "Allow others to join" on the iPhone, select and turn on.
2.Click "Settings" of the projector -- turn on "WIFI", search for the hotspot name of iPhone, and
nd and connect.
3.Swipe your iPhone from the bottom up and open the iPhone control center (Slide from the
top down for iPhone X).
4.Click "AirPaly Mirroring"a and the device list will automatically search for the internal projec-
tion device in the same network.
5.From the device list, click the name of the projected device you want to connect to
(Eshare-****) to successfully cast the screen.
Use mobile hotspot for AirPlay mirror operation guide
0706
iPhone Airplay reverse
1.Click to open the projected Airplay, then follow the prompts on the page to scan the QR
code of your iPhone, download and install the corresponding Eshare APP.
2.Open the Eshare app on the mobile phone, and the device list will automatically search for
the internal projection device of the same network.
3.Click the projection device (Eshare-****), "one-click screen transmission" and "Reverse
screen transmission" will appear simultaneously.
4.Click "Reverse Screen Transmission".
Screen Projection operation Guide
Wireless screen
Note:
It is recommended to use the built-in Android screen and Eshare android screen. The voice
cannot be transmitted (the system audio acquisition permission cannot be obtained).
Android with multi-screen interactive models with screen tutorial
(Android phone)
Android Miracast operation guide
The android phone and the projector connect the WIFI.
Enter settings and click miracast.
01
02
Open "More Connections or Screen Projection for Android Phone" on the mobile phone
(there are a variety of models of Android mobile phones which may have dierent names,
and the mobile phone to be referred is HUAWEI mobile phone).
The phone and projector will seach for same model in a few seconds and connect
successfully.
03
04
0908
Bluetooth Connection
Homepage> Settings> Bluetooth >Open Bluetooth.
Trapezoidal settings
1.Automatic Trapezium Calibration: Turn on the automatic trapezoid calibration option and
check horizontal 0°calibration option.
2.Manual Setup: Adjust the trapezoidal shape on the basis of the oset. After clicking to
restore the default option, the initial state will be automatically reset.
3.Quadrangular Trapezium Calibration: The four angles of trapezoid can achieve the free
adjustment, and click "OK" to switch to the next angle, then click the menu key to return to the
default settings.
Trapezoidal Calibration: Automatic/manual trapezoidal Calibration
General settings
1.Wallpaper: General Settings > Wallpaper > Left and right keys to select wallpaper.
2.Time zone: General Settings > Zime zone > Select your time zone.
3.Input method: You can switch dierent input methods after installing other input methods.
4.Power on: After this option is turned on, the machine will sta automatically when the power
is connected.
5.Fan setting: Automatic/ manual (power adjustment of the whole fan and screen fan).
WIFI Connection
Homepage>Settings>Wi >Turn on wi option.
Picture mode
1.Projection mode: Front/Rear/ Ceiling front/Ceiling rear/Auto.
2.Stepless zoom: Global / Veical / Horizontal.
1110
Online Upgrade
1, Homepage>Settings>System Upgrade. Before you update,please connect the power adapt-
er and wi, otherwise, the update will fail or the system will crash.
2, If there is no reaction,please return to settings and t again,after nishing update,the
system will turn on automatically.
3, If it shows the lastest version of software then the system is up to date.
Switch to bluetooth speaker mode:
1.Turn on bluetooth function on the settings.
2.Sho press power button on remote control or long press on/o buton of machine,select the
bluetooth speaker mode, then you can sta the bluetooth pair and connection to use.
3.lf you want to stop the Bluetooth speaker,press power button on remote control or on/o
button of machine to wake up the projector,and quit the bluetooth connection automatically.
Sound Settings
1. Key Tone: On / O.
2. Sound Eect: Standard/ Vivid.
3. Boot Sound: On / O.
System Settings
System upgrade:
1.Restore facto settings:Select restore facto settings(Be cautious).
2.Device information:
Projector model/System version/ UI version/MCU version/ROM/RAM /Eth Mac.
Select language
Homepage> Settings> Language.
Note:
lt is not recommended to upgrade built-in APP, which may cause incompatibility problems
1312
Attention
For some high version apps, you need to use the mouse to peorm comprehensive and fast
operations, such as Netix and YouTube...etc.
14
Display Technology
Light Source
Native Resolution
Max Compatible Pixels
Installation Options
Aspect Ratio
Focus
Keystone
Speaker
Power Supply
Maximum Power
Sma System
Memo Capacity
Wireless Mirroring
Wi-Fi
Bluetooth-compatible
Photo Format Suppoed
LCD
LED
1920*1080 Pixels
4096*2160dpi H.265/30Hz
Front / Rear / Ceiling
16:9
Manual
Auto ± 40°
5W*2
AC 100-240V 50/60Hz 1.5A
65W
Android 9.0
2+16GB
Suppo
2.4G/5G Wi-Fi
BT5.0
JPEG/BMP/PNG/GIF
Parameters
Warranty policy
In order to provide better seice & shopping experience for you.
Please purchase the goods through legal channels. We will provide 12-month warranty.
The warranty don’t include man-made damage, disassemble burning, water ingress, breakage
etc. MP3/WMA/MP2/OGG/ACC/
M4A/MA4/FLAC/APE/3GP/WAV
MPEG-1/MPEG-2/MPEG-4/
H.263/H.264/G.265/WAV
HDMI x1/USB x1/Audio Out x1
190*130*140mm
Audio Format Suppoed
Video Format Suppoed
Pos
Unit Dimension
15
Tabla de contenidos
Idiomas:
Otros manuales de Proyector de BlitzWolf
