BLACKSTONEPRODUCTS.COM/SUPPORT
ENGLISH
| OWNER’S MANUALASSEMBLY GUIDEMODEL:
STEP 21 Use two (2) [AA]bolts and two (2) [HH]flat washers to
attach shelf 1 {L1} to post {A4}.
Use two (2) [AA]bolts and two (2) [HH]flat washers to attach shelf 1
{L1} to post {A1}.
Use two (2) [CC]bolts, four (4) [HH]flat washers, and two (2) [GG]
nuts to attach shelf 1 {L1} to shelf 2 {L2}.
STEP 22 Note: DO NOT tighten the bolts completely until all the bolts
and washers are properly installed.
Use six (6) [CC]bolts, six (6) [HH]flat washers, and six (6) [EE]
sealant washers to attach roof panels {M1}, {M2}, {M3}, {M4}, and {M5}
to roof top ribs {G1} and {G2}.
Use two (2) [CC]bolts, two (2) [HH]flat washers, and two (2) [EE]
sealant washers to attach roof panels {M1}, {M2}, {M3}, {M4}, and {M5}
to cross beams {D3} and {D4}.
Note: If the holes don't align during the assembly, pull the cross-
beams outward to align the holes.
STEP 23 Note: DO NOT tighten the bolts completely until all the bolts
and washers are properly installed.
Use two (2) [CC]bolts, two (2) [HH]flat washers, and two (2) [EE]
sealant washers to attach gutter 2 {H2} to the roof panels and cross
beam {D4}.
STEP 24 Note: DO NOT tighten the bolts completely until all the bolts
and washers are properly installed.
Use two (2) [CC]bolts, two (2) [HH]flat washers, and two (2) [EE]
sealant washers to attach gutter 1 {H1} to the roof panels and cross
beam {D3}.
L2
A1
A4 L1
[AA]× 4
[CC]× 2
[HH]× 8
[GG]× 2
[CC]× 2
[EE]× 2
[HH]× 2
D4
H2
[CC]× 2
[EE]× 2
[HH]× 2
D3
H1
M1
M2
M3
M4
M5
D3
D4
[CC]× 8
[EE]× 8
[HH]× 8
