Black Horse Model ORBIT BH106 Manual de usuario

Instruction Manual book

SPECIFICATION



Wingspan : 1,780mm 70.08 in.



Length : 1,320mm 51.97 in.



Weight : 2.65kg 5.83 Lbs.



Radio : 04 channels.



Servo : 04 -05 servos.



Engine : 46 2 stroke

52 4 stroke

ITEM CODE: BH 106

Partslistingrequired(notincluded)



ElectricMotor: EMAX 2826/06.



Battery:4Cells-Li-Poly-14.8V-4,000mAh-20c.

MadeinVietnam.

SpeedControl:60A

ORBIT- ITEM CODE BH106 Instruction Manual

This instruction manual is designed to help you build a great flying aeroplane. Please read this

manualthoroughlybeforestartingassemblyofyourORBIT Usethe partslisting belowto identifyall

parts.

WARNING

Please be aware that this aeroplane is not a toy and if assembled or used incorrectly it is

capable of causing injury to people or property. WHEN YOU FLY THIS AEROPLANE YOU

ASSUME ALL RISK & RESPONSIBILITY.

IfyouareinexperiencedwithbasicR/CflightwestronglyrecommendyoucontactyourR/Csupplier

and join your local R/C Model Flying Club. R/C Model Flying Clubs offer a variety of training

proceduresdesignedtohelpthe newpilotonhisway tosuccessfulR/C flight.Theywillalsobe able

to advise on any insurance and safety regulations that may apply.

TOOLS & SUPPLIES NEEDED

Thick cyanoacrylate glue.

30 minute epoxy.

5 minute epoxy.

Hand or electric drill.

Assorted drill bits.

Modellingknife.

Straight edge ruler.

2mm ball driver.

Phillips head screwdriver.

220 grit sandpaper.

90° square or builder’s triangle.

Wire cutters.

Masking tape & T-pins.

Thread-lock.

Paper towels.

Some more parts.

HARDWAREPACK

COWLING.

Landinggear.....

Toavoidscratching yournew airplane, do not

unwrap the pieces until they are needed for

assembly. Cover your workbench with an old

towel or brown paper, both to protect the air-

craftandtoprotectthe table. Keep acoupleof

jars or bowls handy to hold the small parts af-

ter you open the bag.

Pleasetrialfitallthe parts.Makesureyouhave

the correct parts and that they fit and are

alignedproperlybefore gluing!Thiswillassure

proper assembly. ORBIT ARF is hand made

from natural materials, every plane is unique

andminoradjustmentsmayhaveto be made.

However, you should find the fit superior and

assembly simple.

The painted and plastic parts used in this kit

are fuel proof. However, they are not tolerant

of many harsh chemicals including the follow-

ing:paintthinner,C/Aglueaccelerator,C/Aglue

debonderandacetone.Donotletthese chemi-

cals come in contact with the colors on the

covering and the plastic parts.

PARTS LISTING

FUSELAGE ASSEMBLY

(1) Fuselage.

WING ASSEMBLY

(1) Right wing half with pre-installed

aileron.

(1) Left wing half with pre-installed

aileron.

Tail section assembly

(1) Vertical stabilizer with pre-

installedrudder.

(1) Horizontal stabilizer with pre-

installedelevatorhalves.

SUGGESTION

NOTE.

ORBIT- ITEM CODE BH106 Instruction Manual

Caution: this model is not a toy!

Ifyouareabeginnertothistypeofpoweredmodel,pleaseask an experienced model flyer for help

and support. If you attempt to operate the model without knowing what you are doing you could

easily injure yourself or somebody else. Please keep your safety and well-being in mind at all

times.

Important: before you start construction

Even if you have already built a large number of RC models please read right through these

instructions and check all the kit components against the parts list. We have taken great trouble to

keep construction as simple as possible, without making any compromises in the area of safety.

Note regarding the film covering

Minor creases or bubbles may develop in the film covering due to major fluctuations in weather

conditions (temperature, humidity etc.); in rare cases you may even find a slight warp in a

component. These minor faults are in the nature of film-covered built-up wooden structures, and

can easily be corrected using a heat gun, as commonly used for modelling.

Creases: Blow warm air over the area and rub down with a soft cloth.

Wing warp: Hold the panel twisted gently in the opposite direction to the warp, and apply

warm air to remove the creases from the covering.

Caution! do not heat the film more than is absolutely necessary. If the air or the iron is too hot, the

film may melt and holes may be formed.This model is highly pre-fabricated and can be built in a

very short time. However, the work which you have to carry out is important and must be done

carefully. The model will only be strong and fly well if you complete your tasks competently - so

please work slowly and accurately.

When self-tapping screws have to be screwed into wood, apply a little white glue to prevent

them shaking loose: just squirt white glue into the hole and fit the screw.

+ This is not a toy

+ Be sure that no other flyers are using your radio frequency.

+ Do not smoke near fuel

+ Store fuel in a cool, dry place, away from children and pets.

+ Wear safety glasses.

+The glow plug clip must be securely attached to the glow plug.

+ Do not flip the propeller with your fingers.

+ Keep loose clothing and wires away from the propeller.

+ Do not start the engine if people are near. Do not stand in line with the side of the propeller.

+ Make engine adjustments from behind the propeller only. Do not reach around the spinning

propeller.

SAFETY PRECAUTION.

REPLACEMENT LARGE PARTS

B.Wingpanel(Left&Right). C.Fuselage.

A.Cowling. D.Horizontalstabilizer. F.Aluminium wing dihedral brace.

E. Vertical stabilizer G. Decal sheet.

E. G.

ORBIT- ITEM CODE BH106 Instruction Manual

REPLACEMENT SMALL PARTS

 1. Install the rubber grommets and brass

eyelets onto the aileron servo.

INSTALLING THE AILERON SERVOS.

C/Aglue

Aileron Bottom side

6. Plastic - engine mount.

1.Aluminium landing gear.

8. Wheels

4. Fuel tank.

3.Spinner.

10. Tail gear set.

2. Wheel pants.

5. Plastic parts for rudder and elevator

pushrod.

11.Aluminiumtube

9. Plastic part for bottom engine.

7. Battery tray.

3. 4.

11. 10.

ORBIT- ITEM CODE BH106 Instruction Manual

C/Aglue

2. Using a modeling knife, remove the cov-

ering servo tray.

3. Drill 1,5mm pilot holes through the block

of wood for each of the four mounting screws

provided with the servo. Install servo into ai-

leron servo tray as same as picture below.

Remove

covering

Servo tray.

Thread

Electric wire

Aileron Bottom side

Secure

ORBIT- ITEM CODE BH106 Instruction Manual

Installing the aileron linkages as pictures

below.

Repeat the procedure for the other wing

half.

Secure

INSTALLING THE AILERON

CONTROL HORN.

2mm X 20mm.

Secure.

1)Insertaileroncontrol horntotheaileron.

2) Drill two 2mm holes through the aileron

using the control horn as a guide and screw

the control horn in place.

Drill 2mm

hole

Aileronpushrod.

INSTALLING THE AILERON

LINKAGES.

Aileronpushrod.

Locate the aluminium wing dihe-

dral

brace.

WINGATTACHMENT.

*** Test fit the aluminium tube dihedral brace

into each wing haft. The brace should slide in

easily. If not, use 220 grit sand around the

edges and ends of the brace until it fits prop-

erly.

2x10mm. M2 M2 lock nut

80 mm.

340 mm.

12mm

ORBIT- ITEM CODE BH106 Instruction Manual

Epoxy glue.

Epoxy

glue.

C/A glue.

THERE ARE TWO OPTIONS:

1. ENGINE MOUNT.

2. ELECTRIC MOTOR

1. OPTION 1: ENGINE MOUNT.

INSTALLING THE ENGINE MOUNT.

3 x 20mm

ORBIT- ITEM CODE BH106 Instruction Manual

 8. Feed three lines through the fuel tank

compartment and through the pre-drilled hole

in the firewall. Pull the lines out from behind

the engine, while guiding the fuel tank into

place. Push the fuel tank as far forward as

possible,thefront ofthetankshould justabout

touch the back of the firewall.

6. When satisfied with the alignment of the

stopper assembly tighten the 3mm x 20mm

machine screw until the rubber stopper ex-

pandsandseals thetankopening.Do notover

tighten the assembly as this could cause the

tank to split.

7. Using a modeling knife, cut 3 lengths of

fuel line 150mm long. Connect 2 lines to the 2

vent tubes and 1 line to the fuel pickup tube in

the stopper.

When the stopper assembly is installed

in the tank, the top of the vent tube should

rest just below the top surface of the tank.

It should not touch the top of the tank.

1. The stopper has been pre-assembled at

the factory.

2.Using a modeling knife, cutonelengthof

siliconfuelline(thelengthofsilicon fuel line is

calculated by how the weighted clunk should

restabout8mmawayfrom the rear ofthetank

andmovefreelyinside the tank). Connectone

end of the line to the weighted clunk and the

otherendtothenylon pick up tubeinthestop-

per.

3.Carefullybendthesecondnylon tube up

ata45 degreeangle(using acigarettelighter).

This tube will be the vent tube to the muffler.

4.Carefullybendthethirdnylon tube down

ata45 degreeangle(using acigarettelighter).

This tubewillbevent tubetothefueling valve.

Secure.

INSTALLING THE STOPPER ASSEMBLY

 5. Test fit the stopper assembly into the

tank. It may be necessary to remove some of

the flashing around the tank opening using

amodelingknife. If flashing is present, make

sure none of it falls into the tank.

FUEL TANK.

Vent tube Fuel pick- up tube

Fuelfilltube

ORBIT- ITEM CODE BH106 Instruction Manual

Blow through one of the lines to ensure

the fuel lines have not become kinked inside

the fuel tank compartment. Air should flow

througheasily.

9. To secure the fuel tank in place, apply a

bead of silicon sealer to the forward area of

thetank,where it exitsthefuselagebehind the

enginemountingboxandtotherear ofthetank

at the forward bulkhead.

Tie wrap.

Fueltank

INSTALLING THE ENGINE.

Markpoint

ORBIT- ITEM CODE BH106 Instruction Manual

Drill a hole

4mm diameter

Pushrod wire

Pushrod

wire

Secure

Plastic part for bottom Engine .

Remove

covering

Remove

covering

Tabla de contenidos

Otros manuales de Juguete de Black Horse Model

Black Horse Model

Black Horse Model P- 47 THUNDERBOLT- EP Manual del propietario

Black Horse Model

Black Horse Model SPEED AIR-40 Manual del propietario

Black Horse Model

Black Horse Model BEDE BD-5 Manual del propietario

Black Horse Model

Black Horse Model CHIPMUNK Manual de usuario

Black Horse Model

Black Horse Model Edge 540-V3 Manual del propietario

Black Horse Model

Black Horse Model Mustang P51 Manual de usuario

Black Horse Model

Black Horse Model Edge 540-V3 Manual del propietario

Black Horse Model

Black Horse Model MDM-1FOX Manual del propietario

Black Horse Model

Black Horse Model PIPER CUB NC 76510 Manual del propietario

Black Horse Model

Black Horse Model Twister Manual del propietario

Black Horse Model

Black Horse Model Shark BH119 Manual del propietario

Black Horse Model

Black Horse Model BH48 Manual del propietario

Black Horse Model

Black Horse Model Ultimate Manual del propietario

Black Horse Model

Black Horse Model T-28 Trojan 120 Manual de usuario

Black Horse Model

Black Horse Model YAK 54 Manual del propietario

Black Horse Model

Black Horse Model sea fury-ep Manual del propietario

Black Horse Model

Black Horse Model BH167 Manual del propietario

Black Horse Model

Black Horse Model VIPER JET TURBINE Manual del propietario

Black Horse Model

Black Horse Model FAIRCHILD 24W Manual del propietario

Black Horse Model

Black Horse Model Extra 300S Manual del propietario

Black Horse Model

Black Horse Model KATANA bh27 Manual del propietario

Black Horse Model

Black Horse Model AT.6-Texan Manual del propietario

Black Horse Model

Black Horse Model Thermal 3.0 Manual de usuario

Black Horse Model

Black Horse Model NOORDUYN NORSEMAN Manual del propietario

Manuales populares de Juguete de otras marcas

marklin

marklin 37321 Manual de usuario

Canon

Canon PAPER CRAFT Manual de usuario

GREAT PLANES

GREAT PLANES Pitts M-12S Manual de usuario

NOCH

NOCH 14261 Manual de usuario

Hausler

Hausler 450 SE V2 Manual de usuario

Dynaflite

Dynaflite Daydream Manual de usuario

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manual

Kenner

Kenner Batman 63651 Manual de usuario

LEGO

LEGO 8527 Manual de usuario

iKarus

iKarus ECO 8 Manual de usuario

Multiplex

Multiplex EasyStar II Manual de instrucciones

Walkera

Walkera 38 Manual de instrucciones

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manual de usuario

MD MXION SWD Manual de usuario

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manual de usuario

marklin

marklin 39671 Manual de usuario

Meccano

Meccano 15103 Manual de usuario

LEGO

LEGO TECHNIC 8735 Manual de usuario