Black & Decker BCSC115 Manual de usuario

Please read before returning this product for anyreason.

Àlire avant de retourner ce produit pour quelque raison que cesoit.

Lea el manual antes de devolver este producto por cualquiermotivo.

INSTRUCTION MANUAL

MODE D’EMPLOI

MANUAL DE INSTRUCCIONES

BCSC115

4V MAX* SCISSORS

CISAILLE 4V MAX*

TIJERAS 4V MAX*

English (original instructions) 3

Français (traduction de la notice d’instructions originale) 16

Español (traducido de las instrucciones originales) 30

Fig. A

Components

1 Trigger

2 Lock out button

3 Handle

4 O‑blade

5 D‑blade

6 Head

7 Head release button

8 Charging port

9 Charging LED

Composants

1 Gâchette

2 Bouton de verrouillage

3 Poignée

4 Lame O

5 Lame D

6 Tête

7 Bouton de libération de

la tête

8 Port de charge

9 Voyant DEL de

chargement

Componentes

1 Gatillo

2 Botón de bloqueo

3 Manija

4 Cuchilla O

5 Cuchilla D

6 Cabeza

7 Botón de liberación de

cabeza

8 Puerto de carga

9 LED de carga

Fig.B Fig.C

Fig.D Fig.E

Fig.F Fig.G

ENGLISH

GENERAL POWER TOOL SAFETY WARNINGS

WARNING: Read all safety warnings, instructions, illustrations and

specifications provided with this power tool. Failure to follow all instructions listed

below may result in electric shock, fire and/or seriousinjury.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR

FUTURE REFERENCE.

The term “power tool” in the warnings refers to your mains‑operated (corded) power tool or

battery‑operated (cordless) powertool.

1) Work Area Safety

a ) Keep work area clean and well lit. Cluttered or dark areas inviteaccidents.

Definitions: Safety Alert Symbols and Words

This instruction manual uses the following safety alert symbols and words to alert you to

hazardous situations and your risk of personal injury or propertydamage.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result

in death or seriousinjury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could

result in death or seriousinjury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result

in minor or moderateinjury.

(Used without word) Indicates a safety relatedmessage.

NOTICE: Indicates a practice not related to personal injury which, if not avoided,

may result in propertydamage.

Intended Use

Your cordless scissors has been designed for cutting applications.This product is intended for

consumer useonly.

DO NOT use under wet conditions or in presence of flammable liquids orgases.

DO NOT let children come into contact with the tool. Supervision is required when

inexperienced operators use thistool.

English (original instructions)

WARNING: Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, fire and/or seriousinjury.

WARNING: To reduce the risk of injury, read the instructionmanual.

ENGLISH

b ) Do not operate power tools in explosive atmospheres, such as in the presence

of flammable liquids, gases or dust. Power tools create sparks which may ignite the

dust orfumes.

c ) Keep children and bystanders away while operating a power tool. Distractions

can cause you to losecontrol.

2) Electrical Safety

a ) Power tool plugs must match the outlet. Never modify the plug in any way. Do

not use any adapter plugs with earthed (grounded) power tools. Unmodified

plugs and matching outlets will reduce risk of electricshock.

b ) Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric shock if your

body is earthed orgrounded.

c ) Do not expose power tools to rain or wet conditions. Water entering a power tool

will increase the risk of electricshock.

d ) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging

the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electricshock.

e ) When operating a power tool outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electricshock.

f ) If operating a power tool in a damp location is unavoidable, use a ground

fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of

electricshock.

3) Personal Safety

a ) Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use a power tool while you are tired or under the influence

of drugs, alcohol or medication. A moment of inattention while operating power

tools may result in serious personalinjury.

b ) Use personal protective equipment. Always wear eye protection. Protective

equipment such as a dust mask, non‑skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personalinjuries.

c ) Prevent unintentional starting. Ensure the switch is in the off‑position before

connecting to power source and/or battery pack, picking up or carrying the

tool. Carrying power tools with your finger on the switch or energizing power tools that

have the switch on invitesaccidents.

d ) Remove any adjusting key or wrench before turning the power tool on.

A wrench or a key left attached to a rotating part of the power tool may result in

personalinjury.

ENGLISH

e ) Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpectedsituations.

f ) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewelry or long hair can be

caught in movingparts.

g ) If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust collection can

reduce dust‑relatedhazards.

h ) Do not let familiarity gained from frequent use of tools allow you to become

complacent and ignore tool safety principles. A careless action can cause severe

injury within a fraction of asecond.

4) Power Tool Use and Care

a ) Do not force the power tool. Use the correct power tool for your application. The

correct power tool will do the job better and safer at the rate for which it wasdesigned.

b ) Do not use the power tool if the switch does not turn it on and off. Any power

tool that cannot be controlled with the switch is dangerous and must berepaired.

c ) Disconnect the plug from the power source and/or remove the battery pack,

if detachable, from the power tool before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk

of starting the power toolaccidentally.

d ) Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrainedusers.

e ) Maintain power tools and accessories. Check for misalignment or binding of

moving parts, breakage of parts and any other condition that may affect the

power tool’s operation. If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained powertools.

f ) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier tocontrol.

g ) Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from those intended could

result in a hazardoussituation.

h ) Keep handles and grasping surfaces dry, clean and free from oil and grease.

Slippery handles and grasping surfaces do not allow for safe handling and control of the

tool in unexpectedsituations.

ENGLISH

5) Battery Tool Use and Care

a ) Recharge only with the charger specified by the manufacturer. A charger that is

suitable for one type of battery pack may create a risk of fire when used with another

batterypack.

b ) Use power tools only with specifically designated battery packs. Use of any other

battery packs may create a risk of injury andfire.

c ) When battery pack is not in use, keep it away from other metal objects, like

paper clips, coins, keys, nails, screws or other small metal objects, that can

make a connection from one terminal to another. Shorting the battery terminals

together may cause burns or afire.

d ) Under abusive conditions, liquid may be ejected from the battery; avoid

contact. If contact accidentally occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from the battery may cause irritation

orburns.

e ) Do not use a battery pack or tool that is damaged or modified. Damaged or

modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk

ofinjury.

f ) Do not expose a battery pack or tool to fire or excessive temperature. Exposure

to fire or temperature above 265°F (130°C) may causeexplosion.

g ) Follow all charging instructions and do not charge the battery pack or tool

outside the temperature range specified in the instructions. Charging improperly

or at temperatures outside the specified range may damage the battery and increase

the risk offire.

6) Service

a ) Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool ismaintained.

b ) Never service damaged battery packs. Service of battery packs should only be

performed by the manufacturer or authorized serviceproviders.

Additional Safety Information

WARNING: Never modify the power tool or any part of it. Damage or personal injury

couldresult.

WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety glasses.

Also use face or dust mask if cutting operation is dusty. ALWAYS WEAR CERTIFIED

SAFETYEQUIPMENT:

• ANSI Z87.1 eye protection (CAN/CSA Z94.3),

• ANSI S12.6 (S3.19) hearing protection,

• NIOSH/OSHA/MSHA respiratoryprotection.

ENGLISH

Additional Specific Safety Instructions forShears

• Hold power tool by insulated gripping surfaces, when performing an operation

where the cutting accessory may contact hidden wiring. Cutting accessory contacting

a “live” wire may make exposed metal parts of the power tool “live” and could give the

operator an electricshock.

• Cut material at or below ratedcapacity.

• NEVER have any part of your body near the blades. Serious personal injury mayresult.

• Keep hands away from cutting area. A moment of inattention while operating power

tools may result in serious personalinjury.

• ALWAYS wear gloves when handling sheet metal. The edges are sharp and can cause

serious personalinjury.

• Firmly secure the piece of metal to be cut to prevent movement duringcutting.

• ALWAYS start tool before engaging material to becut.

• If possible, cut material so scrap curl is to the right. This direction will move curl down

and out of theway.

• Use shears upright. If tool is upside down, metal curl may turn towardyou.

• DO NOT use the shear with any kind of accessory orattachment.

• Always wear safety shoes to protect your feet from sharp metal debris on thefloor.

• Keep all screws tight. Check periodically forloosening.

WARNING:

Some dust created by power sanding, sawing, grinding, drilling, and other

construction activities contains chemicals known to the State of California to cause cancer,

birth defects or other reproductive harm. Some examples of these chemicalsare:

• lead from lead‑based paints,

• crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically‑treatedlumber.

Your risk from these exposures varies, depending on how often you do this type of work.

To reduce your exposure to these chemicals: work in a well ventilated area, and work

with approved safety equipment, such as those dust masks that are specially designed

to filter out microscopicparticles.

• Wear protective clothing and wash exposed areas with soap and water. Allowing dust

to get into your mouth, eyes, or lay on the skin may promote absorption of harmfulchemicals.

Direct particles away from face andbody.

• Use the appropriate dust extractor vacuum to remove the vast majority of static

and airborne dust. Failure to remove static and airborne dust could contaminate

the working environment or pose an increased health risk to the operator and those in

closeproximity.

ENGLISH

The label on your tool may include the following symbols. The symbols and their definitions are

asfollows:

V.........................volts

Hz .......................hertz

min.....................minutes

or DC......direct current

...................... Class I Construction (grounded)

…/min.............. per minute

BPM....................beats per minute

IPM..................... impacts per minute

OPM.................... oscillations per minute

RPM....................revolutions per minute

sfpm ...................surface feet per minute

SPM.................... strokes per minute

A.........................amperes

W........................watts

Wh...................... watt hours

Ah.......................amp hours

or AC........... alternating current

or AC/DC.... alternating or direct current

...................... Class II Construction (double insulated)

no.......................no load speed

n.........................rated speed

PSI.......................pounds per square inch

...................... earthing terminal

..................... safety alert symbol

..................... visible radiation

do not stare into the light

..................... wear respiratory protection

..................... wear eye protection

..................... wear hearing protection

..................... read all documentation

• Do not place anything into the motor housingopenings.

• Clean out your tool often, especially after heavy use. Dust and grit containing metal

particles often accumulate on interior surfaces and could create an electric shockhazard.

• Stay clear of end pieces that may fall after being cut off. Contact with a sharp edge

could result in personalinjury.

READ ALL INSTRUCTIONS

Important Safety Instructions for All Integral Battery Tools

WARNING: Read all safety warnings, instructions, and cautionary markings

for the battery, charger and product. Failure to follow the warnings and

instructions may result in electric shock, fire and/or seriousinjury.

• NEVER force a charger plug into thetool.

• DO NOT

modify the charger plug of a non‑compatible charger in any way to fit into

the tool as the battery may rupture causing serious personalinjury.

• DO NOT charge or use the battery in explosive atmospheres, such as in the

presence of flammable liquids, gases or dust. Inserting or removing the charger plug

from the tool may ignite the dust orfumes.

• Only charge the battery with the provided USB charge lead.

Otros manuales para BCSC115

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Herramientas eléctricas de Black & Decker

Black & Decker

Black & Decker RP250K Manual de usuario

Black & Decker

Black & Decker FireStorm FS615JS Manual de usuario

Black & Decker

Black & Decker BCSS820 Manual de usuario

Black & Decker

Black & Decker KS700K Manual de usuario

Black & Decker

Black & Decker Ks400e Manual de usuario

Black & Decker

Black & Decker Powerfile KA902E Manual de usuario

Black & Decker

Black & Decker XTS10EK Manual de usuario

Black & Decker

Black & Decker KS901PE Manual de usuario

Black & Decker

Black & Decker CD701 Manual de usuario

Black & Decker

Black & Decker MT250 Manual de usuario

Black & Decker

Black & Decker CD12 Manual de usuario

Black & Decker

Black & Decker MT1203B Manual de usuario

Black & Decker

Black & Decker 7" RANDOM ORBITALWAXER Manual de usuario

Black & Decker

Black & Decker BDCH188 Manual de usuario

Black & Decker

Black & Decker Pro Line BPSJ4800 Manual de usuario

Black & Decker

Black & Decker SteamXpress S600 Series Manual de usuario

Black & Decker

Black & Decker HG1500 Manual de usuario

Black & Decker

Black & Decker 6705-10 Manual de usuario

Black & Decker

Black & Decker 5022K Manual de usuario

Black & Decker

Black & Decker RP250 Manual de usuario

Black & Decker

Black & Decker KS850S Manual de usuario

Black & Decker

Black & Decker LD008 Manual de usuario

Black & Decker

Black & Decker KW900E Manual de usuario

Black & Decker

Black & Decker CP141KB Manual de usuario

Manuales populares de Herramientas eléctricas de otras marcas

AEG

AEG OMNI-JS Manual de usuario

SIP

SIP 01533 Manual de usuario

Ribimex

Ribimex PRS499 Manual de usuario

3M Fiber Optic Connector Crimp Tool Manual de usuario

Ryobi

Ryobi P524 Manual de usuario

ROJEK

ROJEK FSN 300A Manual de usuario

Kemper

Kemper 1740PRO Manual de usuario

WABCO

WABCO OptiTire Manual de usuario

EINHELL

EINHELL TE-MS 18/210 Li Manual de usuario

Orgapack

Orgapack OR-T 85 Guía rápida

TOUGHCUT

TOUGHCUT Diamond 400 Manual de usuario

Yaros

Yaros PB-3603 Manual de usuario

Fein

Fein BSS 2.0 E Guía de configuración

Baileigh Industrial

Baileigh Industrial SS-2725 Manual de usuario

Milwaukee

Milwaukee 2674-20 Manual de usuario

Fein

Fein BLs 1.6 Manual de usuario

Princess

Princess Electric Multi Sharpener Manual de usuario

FOREDOM

FOREDOM K.1050 Manual