Black & Decker ProXpress F611 Instrucciones de instalación

SAVE THIS USE AND CARE BOOK

ProXpress™

Automatic Shut-Off™Iron

MODEL F611

800-231-9786

QUESTIONS? Please call us TOLL FREE!

Monday - Friday 8:15 a.m. - 5:00 p.m. Eastern Time.

Self Clean at this water level

IMPORTANT SAFEGUARDS

When using your iron, basic safety precautions should always be followed,

including the following:

■Read all instructions.

■Use iron only for its intended use.

■To protect against a risk of electric shock, do not immerse the iron in water or

other liquid.

■The iron should always be turned to O/FILL before plugging into or unplugging

from an outlet. Never yank cord to disconnect from outlet; instead grasp plug

and pull to disconnect.

■Do not allow cord to touch hot surfaces. Let iron cool completely before

putting away. Loop cord loosely around cord wrap when storing.

■Always disconnect iron from electrical outlet when filling with or emptying of

water and when not in use. Be careful to avoid spilling water over iron

when filling.

■Do not press the self clean button while ironing.

■Do not operate iron with a damaged cord or plug or if the iron has been

dropped or damaged.

■To avoid the risk of electric shock, do not disassemble the iron; instead, take it

to an authorized service center for examination and repair. Incorrect

reassembly can cause a risk of electric shock when the iron is used.

■Close supervision is necessary for any appliance being used by or near

children. Do not leave iron unattended while connected or on an ironing

board. Always position iron carefully to prevent it from falling if ironing board

is accidentally moved or cord is pulled. Always use Heel Rest.

■Burns can occur from touching hot metal parts, hot water, or steam. Use

caution when you turn a steam iron upside down — there may be hot water in

the water tank. Avoid rapid movement of iron to minimize hot water spillage.

■Do not operate in the presence of explosive and/or flammable fumes.

■The use of attachments not recommended or sold by the appliance

manufacturer may cause fire, electric shock or injury.

■Do not use iron outdoors.

■This product is for household use only.

SPECIAL INSTRUCTIONS

■To avoid a circuit overload, do not operate another high-wattage appliance

on the same circuit.

■If an extension cord is necessary, a 10-ampere rated cord should be used.

Cords rated for less amperage may overheat. Care should be taken to

arrange the cord so that it cannot be pulled on or tripped over.

SAVE THESE INSTRUCTIONS

This ProXpress™ Automatic Shut-Off Iron has a polarized

plug (one blade is wider than the other). As a safety

feature, this plug will fit in a polarized outlet only one way.

If the plug does not fit fully in the outlet, reverse the plug.

If it still does not fit, contact a qualified electrician. Do not

attempt to defeat this safety feature.

POLARIZED PLUG

1. Water Fill Hole

2. Spray Nozzle

3. Temperature Selector Dial

4. Indicator Mark

5. Spray Button

6Adjustable Steam/Dry Dial

7. Self Clean IITM System Button

8. Push On Button

9. The Extra Long CordTM

(12 foot cord)

10. Cord Wrap/Stable Heel Rest

11. Large Water Windows

12. Full-length Button Grooves

13. Fabric Guide

14. SilverStone† Soleplate

15. Water Fill Cup - (6 oz. to the

bottom of the spout)

†DuPont SilverStone®premium No-Stick surface

How To Use

PREPARING

THE IRON

Important: Follow this procedure to clean the iron and to

become familiar with its features.

Remove any labels or tags which may be attached.

Using the Water Fill Cup we have provided, fill the Water

Tank about 1/3 full with water. (See ”Filling With Water,“

page 5.)

Set the Temperature Selector Dial to the Indicator Mark

choosing Cotton or Linen settings (6 or 7) and preheat for

about 2 minutes. (See ”Starting The Iron,“ page 5.)

While ironing on an old cotton terry cloth towel for about

two minutes, try using each of the iron’s features.

Turn the Adjustable Steam/Dry Dial to the Indicator Mark

for (light), (medium), and (heavy) settings

to become familiar with the various settings. Use the self-

cleaning feature as described on page 9. Iron on the

towel for another minute or two.

Pump the Sray Button a few times to see the amount of

water that is released. (See Figure F, page 7.)

SPRAY

STEAM

SETTINGS

FILLING WITH WATER

Using the Water Fill Cup we have

provided, pour water into the Water

Fill Hole until the water level reaches

the full mark on the Water Window.

(Figure A) Do not overfill. Refill as

necessary.

Ordinary tap water can generally be

used for ironing. However, do not use

water processed through a home

softening system.

In extremely hard water areas (over

180 parts per million) consider using

distilled or demineralized water. If

using distilled or demineralized water,

tap water should be used the first time

you use the iron and once per month

thereafter to maintain steam

performance.

STARTING THE IRON

Plug in the iron. After setting the

Temperature Selector Dial at the

Indicator Mark for the desired

temperature, press the PUSH ON

Button. (Figure B)

Figure B

USING MOISTURE

Steam

If unmoved for 1 additional minute, it

will shut itself off completely. (Figure C)

To restart the iron, be sure the

Temperature Selector Dial is in a

position other than O/Fill and press the

PUSH ON Button.

Turn the Adjustable Steam

Dial to the Indicator Mark

(Figure D) for (light),

(medium), or

(heavy) steam settings as

indicated next to the Temperature

Settings 4-7 on the saddleplate. If water

spotting occurs, reduce the steam level

and/or increase the heat setting on the

Temperature Selector Dial.

Turn the Adjustable Steam/Dry Dial to

Indicator Mark for DRY to iron

without steam. (Figure E) You

may iron without steam at any

temperature setting.

If the iron is turned on and left sitting

motionless in the Heel Rest position

for 9 minutes, the TEMPERATURE

READY Light will flash to alert you it’s

about to shut itself off.

Figure C

Figure E

Figure D

DRY

Spray

Pump the Button a few times

to get a water mist from the

spray nozzle to spot dampen

stubborn wrinkles. (Figure F)

Turn the Adjustable Steam Control to

DRY and turn the Temperature Selector

Dial to 0/Fill. Unplug the iron. Allow the

iron to cool and wrap the cord.

(Figure G) It is not necessary to empty

the water if the iron is used frequently,

but the iron must be stored on its Heel

Rest to prevent water leaking from

the Soleplate and causing damage to

the Soleplate.

STORING THE IRON

Figure G

Figure F

Refer to this chart for recommended Temperature and

Steam Settings and ironing instructions for various

fabrics. Always read garment labels and follow

manufacturer’s ironing instructions.

FABRIC IRONING

CHART

FABRIC ADJUSTABLE STEAM TEMP. IRONING INSTRUCTIONS

ACRYLIC

ACETATE

NYLON

SILK

POLYESTER

SOME

RAYONS

PERM.

PRESS

COTTON

BLENDS

WOOL

COTTON

LINEN

Dry iron on wrong side.

Press washables while damp.

Dry iron on wrong side to prevent shine.

Press washables while damp.

Dry iron washables while fabric is damp.

Iron rayon fabrics on the wrong side.

Steam iron if fabric manufacturer directs.

Check care label and follow the

manufacturer's instructions for blends:

use the setting for the fiber

requiring the lowest heat.

Steam iron on wrong side to prevent

shine, or use a press cloth on right

side. Do not press completely dry.

Dry iron washables while damp. Use

steam as needed. Iron dark fabrics on

wrong side to avoid shine.

Dry iron washables while damp and

until dry. Use steam as needed. Iron

dark linens on wrong side to avoid shine.

NOTE: USE SPRAY FEATURE AT ANY TEMPERATURE SETTING. STEAM SHOULD ONLY BE USED IN

STEAM AREA OF THE TEMPERATURE SELECTOR DIAL. WATER SPOTTING MAY OCCUR IF THE

SETTING IS TOO LOW.

DRY IRON

AT ANY

SETTING

LIGHT

REGULAR

HEAVY

Allow the iron to cool completely. Wipe the outer shell

and SilverStone† Soleplate finish with a cloth dampened

in water and a mild household detergent. Never use

abrasive, heavy-duty cleansers or scouring pads. After

cleaning, steam iron on an old, cotton terry cloth towel for

approximately 2 minutes.

CLEANING THE

OUTSIDE SURFACES

CARE OF THE IRON

EMPTYING THE IRON

Turn the Temperature Selector Dial to

the Indicator Mark for O/Fill, set the

Adjustable Steam Dial to the Indicator

Mark for the Dry position, and unplug

the iron. Empty the water by holding the

iron over a sink with the tip pointing

downward (Figure H). Water will empty

out the Water Fill Hole.

SELF CLEANING About once a month use the Self Clean feature to flush

out water, minerals, and lint. If lint is allowed to

accumulate in the vents, it can scorch and cause

troublesome brown spotting. Do not be alarmed if hissing

and spitting occurs while self cleaning. This is normal.

With the Water Tank filled to the Self Clean Level and the

iron sitting on its heel rest, turn the Temperature Selector

to the highest temperature setting and push the PUSH ON

Button. The Steam/Dry Dial can be in either position. Turn

the Temperature Selector to O/Fill and unplug the iron.

†DuPont SilverStone®premium No-Stick surface

Figure H

Holding the iron in the ironing position

over a sink or basin, press and hold the

Self Clean Button down until all the

water has been released. This can be

done with one or two hands as shown

in Figures I and J. Choose the method

which is easiest for you.

Place the iron on its Heel Rest and heat

for about 2 minutes to dry out any

remaining water. Iron over an old towel.

Cool as usual.

NEED HELP?

Is the PUSH ON LIGHT on? Push in to turn iron on.

If the Light is not on, will a lamp plugged into the outlet

turn on?

Is the Temperature Selector Dial turned to a fabric

setting?

IRON WON’T HEAT?

Is the PUSH ON Light on and has the iron heated for

about 2 minutes?

Check for water by looking in the Water Windows. Is the

Adjustable Steam Dial set at , , or ?

Adjust the Dial to Dry and back to the desired steam level.

If steaming doesn’t start, gently tap the Soleplate on the

ironing board once or twice.

IRON WON’T START

STEAMING?

Figure I

Figure J

Tabla de contenidos

Otros manuales de Hierro de Black & Decker

Black & Decker

Black & Decker Avant Steam F990 Instrucciones de instalación

Black & Decker

Black & Decker Quickpress AS70 Series Manual de usuario

Black & Decker

Black & Decker X1060 Manual de usuario

Black & Decker

Black & Decker The Classic F63D Series Instrucciones de instalación

Black & Decker

Black & Decker ProFinish X700 Series Instrucciones de instalación

Black & Decker

Black & Decker D2000 Series Instrucciones de instalación

Black & Decker

Black & Decker X1030 Manual de usuario

Black & Decker

Black & Decker IR1160S Instrucciones de instalación

Black & Decker

Black & Decker X1050 Manual de usuario

Black & Decker

Black & Decker PI8000 Instrucciones de instalación

Black & Decker

Black & Decker XT2000 Manual de usuario

Black & Decker

Black & Decker X51 Instrucciones de instalación

Black & Decker

Black & Decker X1015 Manual de usuario

Black & Decker

Black & Decker ICR05X Manual de usuario

Black & Decker

Black & Decker BXIR2402E Manual de usuario

Black & Decker

Black & Decker AS202 Instrucciones de instalación

Black & Decker

Black & Decker Light'N Easy IR0110W Manual de usuario

Black & Decker

Black & Decker IR04VC Manual de usuario

Black & Decker

Black & Decker IR34V Actualización de firmware

Black & Decker

Black & Decker Steam Advantage F1055 Instrucciones de instalación

Black & Decker

Black & Decker PRESS 'N GO IR100 Instrucciones de instalación

Black & Decker

Black & Decker ProFinish X800 Series Instrucciones de instalación

Black & Decker

Black & Decker ICR2010 Manual de usuario

Black & Decker

Black & Decker XT2000 Manual de usuario

Manuales populares de Hierro de otras marcas

Clatronic

Clatronic DB 3703 Manual de usuario

TEFAL

TEFAL FV4093Z0 Manual de usuario

Gorenje

Gorenje SIH 2200 BS Manual de usuario

Philips

Philips GC6012 Manual de usuario

Bosch

Bosch 2 Series Manual de usuario

Riffel

Riffel Catena KB-819 Manual de usuario

Texi

Texi Hestia Manual de usuario

Maxwell

Maxwell MW-3010 Manual de usuario

TREVIDEA

TREVIDEA Girmi ST60 Manual de usuario

Philips

Philips HI5914/30 Manual de usuario

Primula

Primula Vapormat Manual de usuario

Magio

Magio MG-541 Manual de usuario

Scarlett

Scarlett SC-1334S Manual de usuario

Bosch

Bosch Sensixx B22L Manual de usuario

Philips

Philips GC651 Manual de usuario

Vitek

Vitek VT-1247 VT Manual de usuario

Cleanmaxx

Cleanmaxx 3397 Manual de usuario

Philips

Philips GC800 Manual de usuario