BIXOLON SRP-350IIOBEi Manual de instrucciones

Bluetooth Connection Manual

SRP-350IIOBEi

Thermal Printer

Rev. 1.00

http://www.bixolon.com

Rev. 1.00

- 2 -

SRP-350IIOBEi

■ Table of Contents

1. Manual Information........................................................................................................3

2. Precautions ....................................................................................................................3

3. iOS MFi Mode Setting (Optional)..................................................................................3

4. Bluetooth Connection Instructions..............................................................................4

Rev. 1.00

- 3 -

SRP-350IIOBEi

1. Manual Information

This Bluetooth Connection Manual provides information on the connection of Bluetooth-

enabled iOS devices with the printer.

We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and

quality of all our products. In following, product specifications and/or user manual content

may be changed without prior notice.

2. Precautions

2-1 To connect the printer with another device via Bluetooth, the devices must be within

100m of one another. The connection is broken if the distance between devices

exceeds 100m.

2-2 The maximum separating distance may be shortened if transmission obstacles, such

as cement walls, are present.

2-3 If a device (such as a microwave oven, wireless LAN, etc.) that uses the same

frequency is present, transmission may be interrupted. Separate the printer and

Bluetooth-enabled device from such interrupting devices by a distance of at least 5m.

3. iOS MFi Mode Setting (Optional)

This product supports MFi mode that enables Bluetooth communication with iOS devices.

When MFi mode is activated, the printer is not possible to communicate with another

device except for iOS device. (Applicable to MFi Mode support models only: SRP-

350IIOBEi)

3-1 Set-up by printer

1. Turn off the printer power.

2. Remove the screw on the bottom of the printer and

open the bracket.

3. Flip the DIP switches using tweezers or another

narrow-ended tool.

4. MFi mode is available to be changed by setting the

DIP switch NO.8

5. When the DIP switch is on, MFi mode is enabled.

When the DIP switch is off, MFi mode is disabled.

6. The new setting takes effect when you turn on the

printer.

Note: Always change DIP switch settings only when

the printer is turned off. Change made with the

power on have no effect and then on again.

Rev. 1.00

- 4 -

SRP-350IIOBEi

3-2 iOS mode check

1) Implement self-test

2) iOS mode is enabled if “OPERATING MODE” printed “iOS” at the paper.

BLUETOOTH SETTING

BLUETOOTH F/W VERSION: 1.0.00

DEVICE NAME: SRP-350IIOBE

OPERATING MODE: iOS

AUTH. & ENCRY: ENABLE

CONNECTION MODE: 2

3) iOS mode is disabled if “OPERATING MODE” printed “NORMAL” at the paper.

BLUETOOTH SETTING

BLUETOOTH F/W VERSION: 1.0.00

DEVICE NAME: SRP-350IIOBE

OPERATING MODE: NORMAL

AUTH. & ENCRY: ENABLE

CONNECTION MODE: 2

4. Bluetooth Connection Instructions

This manual focuses on the use of the following devices.

Please use this manual as a guide when using devices other than those listed here.

1) Select the icon. 2) Select “General”.

Rev. 1.00

- 5 -

SRP-350IIOBEi

3) Select “Bluetooth”. 4) Select the printer to connect.

5) Enter PIN (default: 0000). 6) Select “Pair”

7) Bluetooth communication is available.

Otros manuales para SRP-350IIOBEi

Tabla de contenidos

Otros manuales de Impresora de BIXOLON

BIXOLON

BIXOLON 275C - SRP Two-color Dot-matrix Printer Manual de usuario

BIXOLON

BIXOLON SRP-350plusIII SRP-352plusIII Instrucciones de instalación

BIXOLON

BIXOLON SRP-350IIOBEi Manual de usuario

BIXOLON

BIXOLON SRP-S3000 Manual de usuario

BIXOLON

BIXOLON BGT-100P Manual de usuario

BIXOLON

BIXOLON Srp-275III Manual de usuario

BIXOLON

BIXOLON SRP-350plusIII SRP-352plusIII Instrucciones de instalación

BIXOLON

BIXOLON SLP-TX420 Nota de publicación

BIXOLON

BIXOLON SPP-R300 Manual de usuario

BIXOLON

BIXOLON SRP-330 Manual de instalación y funcionamiento

BIXOLON

BIXOLON BK3-3 Manual de usuario

BIXOLON

BIXOLON STP-103II Manual de usuario

BIXOLON

BIXOLON SRP-770II Manual de usuario

BIXOLON

BIXOLON SPP-R200 Manual de usuario

BIXOLON

BIXOLON SRP-350 PlusA Manual de usuario

BIXOLON

BIXOLON STP-103II Manual de usuario

BIXOLON

BIXOLON SPP-R310PLUS Manual de usuario

BIXOLON

BIXOLON SRP-350 PlusA Manual de usuario

BIXOLON

BIXOLON SPP-R200II Manual de usuario

BIXOLON

BIXOLON SRP-500 Instrucciones de instalación

BIXOLON

BIXOLON STP-131 Instrucciones de montaje

BIXOLON

BIXOLON BK3-31 Manual de instrucciones

BIXOLON

BIXOLON SRP-500 Manual de usuario

BIXOLON

BIXOLON SRP-352plusIII Nota de publicación

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario