BIXOLON SRP-330 Manual de usuario

User’s Manual

SRP-330

Thermal Printer

Rev. 1.01

http://www.bixolon.com

Rev. 1.01

- 2 -

SRP-330

■Safety Precautions

In using the present appliance, please keep the following safety regulations in order to

prevent any hazard or material damage.

WARNING

Violating following instructions can cause serious injury or death.

Do not bend the cable by force or leave it under any

heavy object.

•A damaged cable can cause a fire.

Do not plug in or unplug with your hands wet.

•You can be electrocuted.

Keep the plastic bag out of children’s reach.

•If not, a child may put the bag on his head.

Do not pull the cable to unplug.

•This can damage the cable, which is the origin of a fire or a

breakdown of the printer.

You must use only the supplied adapter.

•It is dangerous to use other adapters.

Do not plug several products in one multi-outlet.

•This can provoke over-heating and a fire.

•If the plug is wet or dirty, dry or wipe it before usage.

•If the plug does not fit perfectly with the outlet, do not plug in.

•Be sure to use only standardized multi-outlets.

PROHIBITED

ONLY SUPPLIED ADAPTER

PROHIBITED

Rev. 1.01

- 3 -

SRP-330

CAUTION

Violating following instructions can cause slight wound or damage the appliance.

Do not use the printer when it is out of order. This

can cause a fire or an electrocution.

•Switch off and unplug the printer before calling your dealer.

Do not let water or other foreign objects in the

printer.

•If this happened, switch off and unplug the printer before

calling your dealer.

Use only approved accessories and do not try to

disassemble, repair or remodel it for yourself.

•Call your dealer when you need these services.

•Do not touch the blade of auto cutter.

Install the printer on the stable surface.

•If the printer falls down, it can be broken and you can hurt

yourself.

Keep the desiccant out of children’s reach.

•If not, they may eat it.

If you observe a strange smoke, odor or noise from

the printer, unplug it before taking following

measures.

•Switch off the printer and unplug the set from the mains.

•After the disappearance of the smoke, call your dealer to

repair it.

TO UNPLUG

PROHIBITED

DISASSEMBLING

PROHIBITED

TO UNPLUG

PRINTER

DEALER

PRINTER

Rev. 1.01

- 4 -

SRP-330

■ Warning - U.S.A

This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

■Notice - Canada

This Apparatus complies with class “A” limits for radio interference as specified in the

Canadian department of communications radio interference regulations.

Get appareil est conforme aux normes class “A” d’interference radio tel que specifier par

ministre canadien des communications dans les reglements d’interference radio.

■Caution

Some semiconductor devices are easily damaged by static electricity. You should turn the

printer “OFF”, before you connect or remove the cables on the rear side, in order to guard

the printer against the static electricity. If the printer is damaged by the static electricity, you

should turn the printer “OFF”.

■ Waste Electrical and Electric Equipment (WEEE)

This marking shown on the product or its literature, indicates that is should not be

disposed with other household wastes at the end of its working life, To prevent

possible harm to the environment or human health from uncontrolled waste

disposal, please separate this from other types of wastes and recycle it

responsibly to promote the sustainable reuse of material resources. Household

users should contact either the retailer where they purchased this product, or their

local government office, for details of where and how they can take this item for

environmentally safe recycling. Business users should contact their supplier and check the

terms and conditions of the purchase contract. This product should not be mixed with other

commercial wastes for disposal.

Rev. 1.01

- 5 -

SRP-330

■Introduction

The SRP-330 Roll Printer is designed for use with electronic instruments such as system

ECR, POS, banking equipment, computer peripheral equipment, etc.

The main features of the printer are as follows:

1. High speed printing : 47.28 (1/6” Feed) lines per second.

2. Low noise thermal printing.

3. USB Port & RS-232(SRP-330COS), USB Port & Parallel(SRP-330COP),

USB Port & Ethernet(SRP-330COE)

4. The data buffer allows the unit to receive print data even during printing.

5. Peripheral units drive circuit enables control of external devices such as cash drawer.

6. Characters can be scaled up to 64 times compared to its original size.

7. Bar code printing is possible by using a bar code command.

8. Different print densities can be selected by DIP switches.

Please be sure to read the instruction in this manual carefully before using your new

SRP-330.

※NOTE

The socket-outlet shall be near the equipment and it shall be easy accessible.

※All specifications are subjected to change without notice.

This equipment is indoor use and all the communication hiring are limited to inside of the

building.

We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and quality

of all our products. In following, product specifications and/or user manual content may be

changed without prior notice.

Rev. 1.01

- 6 -

SRP-330

■Table of Contents

1. Setting Up the Printer....................................................................................................7

1-1 Unpacking ..................................................................................................................7

1-2 Connecting the Cables...............................................................................................8

1-2-1 Serial Cable (RS-232C)..................................................................................8

1-2-2 Parallel Cable (IEEE1284) .............................................................................9

1-2-3 USB Cable ...................................................................................................10

1-2-4 Ethernet Cable .............................................................................................10

1-3 Connecting the Drawer.............................................................................................11

1-3-1 Pin assignments...........................................................................................11

1-3-2 Connector model..........................................................................................11

1-3-3 Drawer kick-out drive signal .........................................................................11

1-4 Setting the Dip Switches...........................................................................................12

1-4-1 Serial Interface.............................................................................................12

1-4-2 Parallel / Ethernet Interface..........................................................................12

1-5 Installing or Replacing the Paper Roll ......................................................................13

1-6 Using the Printer.......................................................................................................15

1-6-1 Control Panel ...............................................................................................15

1-6-2 Mounting 2” Partition ....................................................................................15

1-7 Connecting the computer .........................................................................................16

1-8 Connecting the Power Supply..................................................................................17

2. Self Test .......................................................................................................................18

3. Hexadecimal Dumping................................................................................................19

4. Specification................................................................................................................20

5. Appendix......................................................................................................................21

5-1 Cleaning Printer........................................................................................................21

Rev. 1.01

- 7 -

SRP-330

1. Setting Up the Printer

1-1 Unpacking

Your printer box should include these items. If any items are damaged or missing, please

contact your dealer for assistance.

SRP-330 Cover Cable CD

Roll Paper Manual AC Adapter

Power Cord USB A-B Cable 2” Partition

Rev. 1.01

- 8 -

SRP-330

1-2 Connecting the Cables

Connect the cable that is suitable for the specifications of the printer and the host computer

(POS/ECR) to the printer and the host computer. The specification of the drawer should

match the printer specifications.

※NOTE

Before connecting any of the cables, make sure that both the printer and the host are turned

off.

1-2-1 Serial Cable (RS-232C)

Pin No.

Signal Name

Signal Direction

Function

BODY

Frame GND

Frame Ground

TXD

Output

Transmit Data

RXD

Input

Receive Data

DSR

Input

This signal indicates whether the host computer can receive

data. (H/W flow control)

1) MARK(Logic1) : The host can receive a data.

2) SPACE(Logic0) : The host can not receive a data.

3) The printer transmits a data to the host, after confirming

this signal.

4) When XON/XOFF flow control is selected, the printer

does not check this signal.

Signal GND

Signal Ground

DTR

Output

This signal indicates whether the printer is busy. (H/W flow

control)

1) MARK(Logic1) : The printer is busy.

2) SPACE(Logic0) : The printer is not busy.

3) The host transmits a data to the printer, after confirming

this signal.

4) When XON/XOFF flow control is selected, the host does

not check this signal.

Shield

Frame GND

Frame Ground

Drawer kick-out

connector

PRINTER

SIDE

(Male 25P)

HOST

SIDE

(Female 25P)

PRINTER

SIDE

(Male 9P)

HOST

SIDE

(Female 9P)

PRINTER

SIDE

(Male 25P)

HOST

SIDE

(Female 9P)

Rev. 1.01

- 9 -

SRP-330

1-2-2 Parallel Cable (IEEE1284)

Pin No.

Source

Compatibility Mode

Nibble Mode

Host

nStrobe

HostClk

Host / Printer

Data 0 (LSB)

Host / Printer

Data 1

Host / Printer

Data 2

Host / Printer

Data 3

Host / Printer

Data 4

Host / Printer

Data 5

Host / Printer

Data 6

Host / Printer

Data 7 (MSB)

Printer

nACK

PtrClk

Printer

Busy

PtrBusy /Data3,7

Printer

Perror

AckDataReq/Data2,6

Printer

Select

Xflag /Data1,5

Host

nAutoFd

HostBusy

GND

Printer

Logic-H

19~30

GND

Host

nInit

Printer

nFault

nDataAvail /Data0,4

GND

Printer

DK_Status

Printer

+5V

Host

nSelectIn

1284-Active

Drawer kick-out

connector

Rev. 1.01

- 10 -

SRP-330

1-2-3 USB Cable

Pin No.

Signal Name

Assignment (Color)

Function

Shell

Shield

Drain Wire

Frame Ground

VBUS

Red

Host Power : DC5[V] / 500[mA]

D-

White

Differential Data Line

D+

Green

Differential Data Line

GND

Black

Signal Ground

1-2-4 Ethernet Cable

Pin No.

Signal name

Assignment (Color)

Function

TD+

White Orange

Transmit +

TD-

Orange

Transmit -

TCT

White Green

Receive +

Blue

White Blue

RCT

Green

Receive -

RD+

White Brown

RD-

Brown

USB connector

Drawer kick-out

connector

Factory reset button

Otros manuales para SRP-330

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora de BIXOLON

BIXOLON

BIXOLON SRP-350plusIII SRP-352plusIII Instrucciones de instalación

BIXOLON

BIXOLON SRP-350plus Manual de instalación y operación

BIXOLON

BIXOLON SRP-F310II Manual de usuario

BIXOLON

BIXOLON SRP-350V Instrucciones de instalación

BIXOLON

BIXOLON STP-103 Manual de usuario

BIXOLON

BIXOLON SRP-500 Manual de usuario

BIXOLON

BIXOLON SRP-350IIOBEi Manual de usuario

BIXOLON

BIXOLON SRP-275 Manual de usuario

BIXOLON

BIXOLON SRP-330III Manual de instalación y funcionamiento

BIXOLON

BIXOLON Bixolon SRP-270 Manual de usuario

BIXOLON

BIXOLON STP-131 Manual de usuario

BIXOLON

BIXOLON SRP-330 Manual de instalación y funcionamiento

BIXOLON

BIXOLON SPP-R200II Manual de usuario

BIXOLON

BIXOLON SPP-R400 Manual de usuario

BIXOLON

BIXOLON BK3-31 Manual de instrucciones

BIXOLON

BIXOLON SRP-350 PlusA Manual de usuario

BIXOLON

BIXOLON SRP-QE300/302 Instrucciones de instalación

BIXOLON

BIXOLON SRP-330III Manual de instrucciones

BIXOLON

BIXOLON SRP-B300 Manual de usuario

BIXOLON

BIXOLON SRP-350 PlusA Manual de usuario

BIXOLON

BIXOLON Bixolon SRP-270 Manual de usuario

BIXOLON

BIXOLON BK3-3 Manual de usuario

BIXOLON

BIXOLON SRP-350plus Manual de instalación y operación

BIXOLON

BIXOLON SLP-DX420B Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario