BitaTek IT-6000 Series Manual de usuario
IT-6000 Series
Use
r
’s Manual
3
IT-6000 Series
Product Reference Guide
BITATEK CO., LTD.
6F, 190-1, Ta -Tung Road, Sec. 3,Hsichih,
Taipei Hsien, Taiwan
TEL:+886 2 8647 1299 FAX:+886-2 8647 1542
Copyright ©2003 BITATEK CO., LTD. An Unpublished Work - All
rights reserved. No part of the contents of this documentation or
the procedures described therein may be reproduced or
transmitted in any form or by any means without prior written
permission of BITATEK CO., LTD. or its wholly owned
subsidiaries ("BITATEK"). Owners of BITATEK products are
hereby granted a non-exclusive, revocable license to reproduce and
transmit this documentation for the purchaser's own internal
business purposes. Purchaser shall not remove or alter any
proprietary notices, including copyright notices, contained in this
documentation and shall ensure that all notices appear on any
reproductions of the documentation.
Should future revisions of this manual be published, you can
acquire printed versions by contacting BITATEK Customer
Administration. Electronic versions may either be downloadable
from the BITATEK web site (www.bitatek.com.tw) or provided on
appropriate media. If you visit our web site and would like to
make comments or suggestions about this or other BITATEK
publications, please let us know via the “Contact” page.
Disclaimer
Reasonable measures have been taken to ensure that the
information included in this manual is complete and accurate.
However, BITATEK reserves the right to change any specification
at any time without prior notice.
All trademarks and trade names referred to herein are property of
their respective owners. ScanPro® is a registered trademark of
BITATEK CO., LTD. and of its wholly owned subsidiaries.
Microsoft Windows®, Windows® 2000, Windows®CE .Net,
Windows® NT, and Windows® XP are registered trademarks of
Microsoft Corporation.
5
Contents
Chapter 0
Before Getting Started
Introduction
Check the Package
Parts information
Charging the Battery
Installing Batteries
Charging battery with adapter
Charging battery with Docking Cradle
Chapter 1
Getting Started
Introduction
Setting Up
Starting
Calibrating the Touch Screen
Adjusting Brightness
Adjusting Volume
Scanning
Running Scanner Diagnostics
Scanning
Chapter 2
Using
Introduction
Using the Stylus
Using the Keypad
Using the Ear/Microphone
Using the Handstrap
Using Applications
Selecting Application
Scanning
Scanning Bar Codes
Chapter 3
Powering
Overview
Suspend Mode
Suspending
Resuming
Backlight
Turn On Backlight
Turn Off Backlight
Batteries
Checking Battery Power
Installing the Main Battery Pack
Charging the Battery
Using the Power Adapter
Using the Docking Cradle
Backup Battery
Battery Life
Battery Disposal
Resetting
Warm Reset
Reasons to Warm Reset
Procedure to Warm Reset
After Warm Reset
Cold Reset
After Cold Reset
Chapter 4
Software Applications
Overview
Firmware Update Utility
Retrieving a Firmware Image Update
Extract Firmware Update Utility
Update IT-6000 Firmware
Flash Memory
Installing Programs
Using an Installation Wizard
Installing Programs Manually
Using File Explorer to Add to the Start Menu
Using ActiveSync to Add to the Start Menu
7
Removing Programs
Selecting and Using Programs
Using the Task and Command Bars
Entering Data
Using the Stylus on the Touchscreen Display
Selecting Text
Entering Data with a Bar Code Scanner
Soft Keypad/Input Panel
Desktop Window
File Explorer
Inbox
Internet Explorer
WordPad
Chapter 5
Configuring
Overview
Context Sensitive Help
Calibrating the Touch screen Display
Adjusting LCD Brightness
Rotating the Screen
Adjusting Volume
Setting Application Buttons
Volume and Sounds
Setting the Date and Time
Power Configuration
Battery Tab
Power Off Tab
Memory Configuration
Memory Allocation & Usage
Network Configuration
Using Wireless LAN
Turn On/Off the Wireless LAN Module
Wireless LAN Configuration
Hardware & Firmware Version Information
Expansion Cards
Serial Number
Firmware Version
Chapter 6
Networks, Communications, and Connections
Overview
SNMP
Installing & Setting Up the IT-6000 IrDA Dock Driver
IrDA Driver Installation
Setting up the IrDA Port
Installing & Setting Up Microsoft® ActiveSync
Microsoft® ActiveSync
Using ActiveSync
Setting up a Partnership
Transferring Files
ActiveSync File Synchronization
Networking
Setting up the Network ID
Network and Dialup Connections
RF Configuration Parameters
Network Setup: Remote ActiveSync
9
Before Getting Started
This chapter contains hardware and software information to assist
you in making the most out of your Mobile Computer. The
components include:
zCheck the Package
zParts information
z
Charging the Battery
Check the Package
Carefully remove all protective materials from around the Mobile
Computer and save the shipping container for later storage and
shipping.
Verify that you received all equipment listed bellow:
zMain Unit ❶
zStylus Pen ❷
zOpen type CF Slot Cover ❸
zStandard Battery Pack ❹
zEar/Microphone ❺
zCharging Adapter ❻
zAdapter Power Cord ❼
zSync Cable ❽
zHandstrap ❾
zQuick Reference Guide
zSupplementary CD
Inspect the equipment for damage. If you are missing any
equipment or if you find any damaged equipment, contact the
Customer Support Center immediately.
Tabla de contenidos
