10
SAFETY
GENERAL SAFETY INFORMATION
Do not operate unit if damaged during shipping, handling, or use. Damage
may result in bursting and cause injury or property damage.
Since the air compressor and other components (lters, lubricators, hoses,
etc.) used make up a high pressure pumping system, the following safety
precautions must be followed at all times:
1. Read all manuals included with this product carefully. Be thoroughly
familiar with the controls and the proper use of the equipment.
2. Follow all local electrical and safety codes.
3. Only persons well acquainted with these rules of safe operation should be
allowed to use the compressor.
4. Keep visitors away and NEVER allow children in the work area.
5. Wear safety glasses and use hearing protection when operating the
pump or unit.
6. Do not stand on or use the pump or unit as a handhold.
7. Before each use, inspect compressed air system and electrical components
for signs of damage, deterioration, weakness or leakage. Repair or replace
defective items before using.
8. Check all fasteners at frequent intervals for proper tightness.
9. Keep ngers away from a running compressor; fast moving and hot parts
will cause injury and/or burns.
10. If the equipment should start to abnormally vibrate, STOP the engine/
motor and check immediately for the cause. Vibration is generally a sign
of trouble or a aw within the machine.
11. To reduce re hazards, keep engine/motor exterior free of oil, solvent,
or excessive grease. Never remove or attempt to adjust safety valve.
Keep safety valve free from paint and other accumulations.
WARNING
Compressor parts may be hot even if the unit is stopped.
WARNING
Motors, electrical equipment and controls can cause
electrical arcs that will ignite a ammable gas or vapor.
Never operate or repair in or near a ammable gas or vapor.
Never store ammable liquids or gases in the vicinity of the
compressor.
