2. DETAILED SAFETY INSTRUCTIONS
1) Read these instructions carefully
2) Keep these instructions
3) Pay attention to all warnings
4) Follow all instructions
5) Do not use this device near water
6) Clean only with a dry cloth
7) Do not block any ventilation openings. Install in accordance with the
manufacturer s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9) The product should be connected to a power supply only of the type as on the
operating instructions or as marked on the product Always ensure that a good
quality applicable to your country. The following wiring convention is used in all
Bishopsound product main leads and must be strictly observed:
•Green and Yellow = Earth Brown = Live Blue = Neutral
IMPORTANT THIS PRODUCT MUST BE EARTHED
10) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
11) Protect the power supply cord from being walked and damaged particularly at the
plugs or at the point at which they exit the unit.
12) Only use attachments/accessories specified by the manufacturer
13) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the device. When a cart is used, use caution when
moving the cart/device combination to avoid injury from stumbling over it.
14) Unplug this device during lightning storms or when not used for long periods
of time.
15) Refer all servicing to qualified service personnel. Servicing is required when
the unit has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the device, the
unit has been exposed to rain or moisture, does not operate normally, or has
been dropped.
IMPORTANT!
Active speakers
Before connecting active speakers to the mains power supply, ensure that the
mains voltage selector is set to the correct voltage supply for your country!
Failure to do so will severely damage the unit.
