WARNING TO THE INSTALLER AND USER
1) CAUTION! For personal safety it is important to follow all the instructions
carefully. Incorrect installation or misuse of the product may cause serious
harm to people.
2) Keep the instructions in a safe place for future reference.
3) This product was designed and manufactured strictly for the use indicated in
this document. Any other usage not expressly indicated in this document, may
damage the product and or be a source of danger.
4) We accepts mo responsibility due to improper use of the automatic machine
(opener) or use other than that intended.
5) Do not install the machine in an area subject to explosion hazard. In)ammable
gasses or fumes are a serious safety hazard.
6) We will not accept responsibility if the rules of good workmanship are
disregarded in installing the closing elements to be motorized, if any
deformation occurs during use of the said elements.
7) Before carrying out any work on the system, turn off the electricity supply.
8) The safety devices (e.g. photocell, sensitive edges, etc...) may be used to
prevent any potential risk in dangerous areas where the moving mechanism is
located , such as crushing, dragging, or shearing.
9) We accepts no responsibility regarding safety and correct operation of the
machine, should components made by manufacturers other than we be used in
the system.
10) Do not make any alterations to the components of the automatic machine
(opener and accessory).
11) The installer must supply full information regarding operation manual of the
system in the event of any emergency and provide the system user with the
“INSTRUCTION” included with the product.
12) Do not allow children or other people to stand near to any moving part of the
opener or door construction while in operation.
13) Keep transmitters away from children to prevent the machine from being
activated accidentally.
14) The user must refrain from attempting to repair or adjust the system
personally and should only contact professional person.
