Biostep Celvin S Manual de usuario

User manual Celvin® S

Order No. BG56-A0160

Order No. BG56-A0320

Order No. BG56-A0420

Order No. BG56-A0830

Control software SnapAndGo from Version 1.6

Directory

I Basic Instructions 1

II General Information 3

................................................................................................................................... 31 Scope of delivery

................................................................................................................................... 42 Symbols

................................................................................................................................... 53 Unpacking, installation and connection

................................................................................................................................... 64 Safety instructions

III Manual of Celvin S 7

................................................................................................................................... 71 Operating element of Celvin S

IV SnapAndGo 10

................................................................................................................................... 101 Program start

................................................................................................................................... 112 General information

.......................................................................................................................................................... 11Program structure

......................................................................................................................................................... 11Navigation and action pane

......................................................................................................................................................... 11Device status

......................................................................................................................................................... 12Export

......................................................................................................................................................... 13Histogram

......................................................................................................................................................... 13Automatic exposure time calculation

.......................................................................................................................................................... 13What is binning?

................................................................................................................................... 143 New project

.......................................................................................................................................................... 15Capturing in basic mode

.......................................................................................................................................................... 17Capturing in master m ode

.......................................................................................................................................................... 21Serial mode

................................................................................................................................... 274 Open project

................................................................................................................................... 305 Settings

................................................................................................................................... 376 Information

................................................................................................................................... 377 Help

V Maintenance and Servicing 38

................................................................................................................................... 381 Service address

................................................................................................................................... 382 Cleaning

................................................................................................................................... 393 Notes

................................................................................................................................... 414 Contamination questionnaire

Basic Instructions 1

1 Basic Instructions

Before Celvin®S, observe the notes in this operating manual!

The basic prerequisite for the correct handling and the undisturbed operation

of the device is the knowledge of the contents of this operating manual. Make

sure that this operating manual is available to the operating personnel and can

be consulted at any time. The biostep®GmbH accepts no liability for personal

or material damage that is due to an incorrect or inappropriate use or due to a

modification at the device made by unauthorised personnel.

The device is only intended for research purposes (and for the purpose of

quality control!)

The copyright of the present operating manual remains with biostep® GmbH.

The operating manual is only intended for the operating personnel and for the

buyer of the device.The complete manual or parts of this operating manual

may only be copied, communicated or otherwise made public with the written

consent of biostep®GmbH.

No part of this manual may be reproduced in any form (photocopy or other

procedures) or be duplicated by use of electronic

processing systems without the written permission of biostep®GmbH.

Contravention could lead to criminal proceedings

Please keep the operating manual as information base for your device.

Subject to technical modifications!

September 2015

biostep®GmbH

User manual Celvin® S2

Manufacturer and

customer service address:

Device data:

(to be completed by the customer)

biostep®GmbH

Innere Gewerbestraße 7

D-09235 Burkhardtsdorf

Telephone: +49 (0) 3721-3905-0

Telefax: +49 (0) 3721-3905-28

Type: Celvin®S

Serial number: __________________

Installation site: __________________

Installation date: __________________

Inventory number: __________________

General Information 3

2 General Information

2.1 Scope of delivery

The Celvin®S, (order numbers: BG56-A0160, BG56-A0320, BG56-A0420, BG56-A0830)

consists of:

1 basic device Celvin®S

1 power cord

1 USB data cable

1 CD with control software SnapAndGo

1 CL substrate Lumixx® ready, 50ml

1 CD mit analysis software TotalLab®1D

1 sample cover panel for blots

1 biostep®CL test blot

1 operating manual

Optional components / reorder equipment:

1. Sample holder and sample cover panel for Celvin®S

sample holder for microtiter plates Celvin®S 420 (order no. BG56-C0210)

sample holder for microtiter plates Celvin®S 830 / 320+ / 160+ (order no. BG56-C0210)

sample holder for petri dishes (order no. BG56-C0230)

sample frame for accurate positioning in detection area

Celvin®S 830 (order no. BG56-C0305)

sample frame for accurate positioning in detection area

Celvin®S 160+ (order no. BG56-C0305)

sample frame for accurate positioning in detection area

Celvin®S 320+ (order no. BG56-C0305)

sample cover panel for blots (order no. BG56-C0250)

2. CL substrates

CL substrates Lumixx® ready, 100ml (order no. LN04-K2005)

CL substrates Lumixx® ready, 250ml (order no. LN04-K2010)

CL substrates Lumixx® plus, 250ml (order no. LN04-K2050)

CL substrates Lumixx® plus, 500ml (order no. LN04-K2055)

3. Other equipment parts

CD with analysis software Totallab®Quant / CLIQS 1D (order no. BW01-A0100)

biostep®CL test blot (order no. BZ09-Q1060)

If you want more information about our products, please visit : www.biostep.de

Check the intactness of the packaging board and of the device. In case of

transport damages, please contact immediately the forwarding agent! Note the

period for notifying defects of the individual transport companies (railway, post,

packet services or forwarding agent). It is possibly only 24 hours.

Defects and damages must be immediately reported to the biostep®GmbH!

User manual Celvin® S4

2.2 Symbols

This operating manual contains the following important symbols in order to point out to

hazards and operating errors.

In particular, the internal laboratory instructions concerning the occupational safety while

handling materials that are potentially dangerous to health, as well as with electrical and fully

automatic devices must be strictly observed.

This "info symbol" gives an indication on information about the correct

handling of the device or on general information for a better understanding.

A non-observance of these instructions may have the result that the device is

incorrectly operated, or is even damaged.

The cleaning, error handling and maintenance of the device are described in

the corresponding chapters.

Caution! General source of hazard!

This general “attention sign” points out to possible personal injury, material and

/ or environmental damages, which are associated with a potential misuse.

Warning against dangerous electrical voltage!

Warning against magnetic field!

At this “hint symbol”, you get hints for the application or particular useful

information for the optimal use of the device.

Please notice further symbols, which also contain important

information and notices!

General Information 5

2.3 Unpacking, installation and connection

Install the device onto a solid, vibration-free and even surface. Keep a distance

to objects of at least 20 cm. Also observe the admissible environmental

conditions for the device. You can find this information in the technical data.

Check the specification about the supply voltage on the type plate

on the rear side of the device.

Only use the supplied mains cable with connector plug or a cable

of the same type. Connect the mains cable of the device only to

an electrical socket with earth contact. Check the connection

cable in regular intervals for damages.

Install the supplied operator software SnapAndGo on the PC. Follow the

instructions on the screen.

Connect the Celvin®S with the PC (USB port) and with the mains connection

via the supplied cables. Switch on the Celvin®S.

Caution! The use of computers with USB 3.0 port can lead to problems.

Either use USB 2.0 or interpose a UBS 2.0 hub between computer

and Celvin®S.

User manual Celvin® S6

2.4 Safety instructions

The Celvin®S is constructed according to the latest technology and the

recognised safety-relevant rules. Nevertheless, hazards for the user or for third

persons may arise during operation, and / or impairments at the device or at

other material assets. The device may only be used:

for the intended use,

in flawless technical safety condition.

The device is operated with an alternating voltage of 110 - 230 V, 50-60 Hz.

Therefore, the following notes must be imperatively observed:

When connecting the Celvin®S to the mains, only the supplied power cable

or a cable of the same type may be used.

Never work with a defective device.

Check the connecting cable for damages before commissioning. Do not use

defective cables under any circumstances.

Pull the plug out of the electrical socket, when the device is not used for a

longer time or before cleaning it.

The device may only be opened or maintained by an authorized specialist

who is instructed at the Celvin®S.

CAUTION! Magnetism!

The lid is locked via two magnets that create a magnetic field. Attention with

cardiac pacemakers and other magnetically sensitive objects.

General Notes

The operation is exclusively made by trained specialist personnel.

If there are doubts about the reliable operational readiness (e.g. obvious damages),

the device must not be connected to a power source and not be switched on.

Do not expose the device to extreme temperatures, use it and store it at room

temperature.

Do not expose the device to a high air humidity (rF> 80%), in order to avoid

condensation at components or at the lens.

Make sure that the device is placed on a hard and level surface in an appropriate

working height.

Use the device only for the intended purpose – the capture of luminescent samples

(Western-blot / Microarrays).

Use appropriate volumes of ECL substrate. Make sure that no fluid runs down at the

housing of the device.

Do not expose the device to direct sunlight.

Touch the lid of the device only from the outside, in order to avoid that your fingers get

pinched.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario