Biostar I86PE-A7 Manual de usuario

I86PE-A7

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. There is no guarantee

that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the

contents here of and specially disclaims any implied warranties of

merchantability or fitness for any purpose. Further the vendor reserves the

right to revise this publication and to make changes to the contents here of

without obligation to notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and

we will not be responsible for any mistakes found in this user’s manual. All the

brand and product names are trademarks of their respective companies.

Table of Contents

Chapter 1: Introduction ............................................................1

1.1 I86PE-A7 Features.............................................................................1

1.2 Package List.......................................................................................3

1.3 I86PE-A7 Layout...............................................................................4

1.4 I86PE-A7 Components.....................................................................5

Chapter 2: Hardware Installation.............................................6

2.1 Central Processing Unit (CPU)........................................................6

2.2 FAN Headers.....................................................................................7

2.3 Memory Module Installation ..........................................................8

2.4 Connectors and Slots........................................................................9

Chapter 3: Headers & Jumpers Setup...................................10

3.1 How to Setup Jumpers...................................................................10

3.2 Detail Settings..................................................................................10

Chapter 4: Useful Help ..............................................................14

4.1 Award BIOS Beep Code.................................................................14

4.2 Extra Information............................................................................14

4.3 Troubleshooting..............................................................................16

Chapter 5: WarpSpeeder™ .......................................................17

5.1 Introduction.....................................................................................17

5.2 System Requirement.......................................................................17

5.3 Installation.......................................................................................18

5.4 [WarpSpeeder™] includes 1 tray icon and 5 panels..................19

I86PE-A7

Chapter 1: Introduction

1.1 I86PE-A7 FEATURES

A. Hardware

CPU

Provides Socket 775.

Supports Intel Pentium 4 processor up to 3.6GHz.

Supports Intel Celeron D processor.

Supports Hyper-Threading Technology.

Front side bus at the following frequency ranges:

-533MT/s (133 MHz Core Clock)

-800MT/s (200 MHz Core Clock)

Chipset

North Bridge: Intel 865PE.

South Bridge: Intel ICH5.

Memory

Supports 1 or 2 64bit DDR data channels with 1 or 2 DIMMs.

Supports 4 band devices, dual channel DDR 266/333/400MHz.

Supports 128/256/512MB and 1GB DDR technologies.

Supports only x8/x16 DDR devices. (Does not support

registered DIMMs.)

Available bandwidth:

-Single Channel: DDR400 up to 3.2GB/s for single channel

-Dual Channel: DDR400 up to 6.4GB/s.

Maximum memory size is up to 4GB, without ECC. (Following

table is only for reference.)

DIMM Socket

Location DDR Module Total Memory

Size

DDRA1 64MB/128MB/256MB/512MB/1GB *1

DDRA2 64MB/128MB/256MB/512MB/1GB *1

DDRB1 64MB/128MB/256MB/512MB/1GB *1

DDRB2 64MB/128MB/256MB/512MB/1GB *1

Max is 4GB.

Super I/O

Chip: ITE IT8712F

Provides the most commonly used legacy super I/O

functionality.

I86PE-A7

Environment Control initiatives:

¾H/W Monitor,

¾Fan Speed Controller (optional),

¾ITE “Smart Guardian” function.

10/100 LAN

Chip: RTL8100C

Supports 10/100Mb/s auto-negotiation operation.

Half/Full duplex capability.

SupportsACPI, PCI power management.

Slot

5 x 32bit PCI bus master slots.

1 x AGP4X/8X slot.

Onboard IDE

Supports 4 IDE disk drives.

Supports PIO mode 0~4, Bus Master, and Ultra DMA33/66/100

function.

Serial ATA

Integrated in SB ICH5.

Supports 2 serial ATA(SATA) ports.

-Data transfer rates up to 150 MB/s.

-Complaints with SATA Version 1.0 specification.

Onboard AC’97 Sound Codec

Chip: ALC655

Support 6 channels.

Supports S/PDIF-Out/In function.

Compliant withAC’97 Version 2.3 specification.

Front Side On-board Peripherals

1 front panel header supports front panel facilities.

1 S/PDIF-Out connector supports digital audio out function

(optional).

1 S/PDIF-In connector supports digital audio in function

(optional).

1 CD-in connector supports 1 CD-ROM audio-in device.

1 front audio header supports front panel audio function.

1 chassis open header supports PC case-opened warning

function.

1 Floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M

and 2.88Mbytes.

I86PE-A7

2 USB headers support 4 USB 2.0 ports.

2 IDE connectors support 4 hard disk devices.

2 serial ATA connectors support 2 SATAdevices.

Rear Side Connectors

4 USB 2.0 ports.

1 serial port.

1 parallel port.

1 RJ-45 LAN jack.

1 PS/2 Mouse & Keyboard port.

1 vertical audio port including 1 line-in connector, 1 line-out

connector, and 1 MIC-in connector.

PS/2

Keyboard

PS/2

Mouse

LAN

Line In/

Surround

Line Out

Mic In 1/

Base/Center

USB x2

COM1

Parallel

JCOM1

USB x2

B. BIOS & Software

BIOS

Award legal BIOS.

Supports APM1.2, ACPI, and USB functions.

Software

Supports 9th TouchTM, FlasherTM, WinFlasherTM, and

WarpspeederTM.

Offers the highest performance for Windows 98, Windows NT,

Windows 2000, Windows ME, Windows XP, Red-Hat Linux, and

UNIX series.

1.2 PACKAGE LIST

FDD cable x1

HDD cable x1

User’s Manual x1

Fully Setup Driver CD x1

USB 2.0 cable x1 (optional)

Serial ATA cable x2 (optional)

S/PDIF out cable x1 (optional)

Rear I/O panel for ATX case x1

I86PE-A7

1.3 I86PE-A7 LAYOUT

Parallel Port

JKBMS1

JUSB1

JCOM1

JAUDIO1

JRJ45USB1

COM1

213

JAUDIO2

JSPDIF_OUT1(optional)

JSPDIF_IN1(optional)

JCDIN1

JATXPWR2

JATXPWR1

BIOS

Codec

DDRA1

DDRA2

DDRB1

DDRB2

AGP1

PCI1

PCI2

PCI4

PCI3

PCI5

BAT1

JKB_USBV1

JUSBV2

JUSBV3_4

JCFAN1

JSFAN1

IDE2

FDD1

IDE1

224

JPANEL1

JSATA1 JSATA2

JDJ1

(optional)

JCMOS1

JCI1

1010

JUSB3

JUSB2

Intel

ICH5

Super

I/O

LAN

CPU1

LGA775

Intel

865PE

Note: ■represents the 1st pin.

I86PE-A7

1.4 I86PE-A7 COMPONENTS

BIOS

Codec

BAT1

Intel

ICH5

Super

I/O

LAN

LGA775

Intel

865PE

A. JATXPWR1/2: ATX power source

headers. L. JPANEL1: Front panel facilities

header.

B. JKB_USBV1: Power source header for

JKBMS1 & JUSB1. M. FDD1: Floppy disk connector.

C. Rear side connectors (back side). N. IDE1/2: Hard disk connectors.

D. JAUDIO2: Front panel audio-out

header. O. JSATA1/2: On-board SATA

connectors.

E. JSPDIF_OUT1/JSPDIF_IN1: Digital

audio-out/in connectors. (Both are

optional.)

P. JCMOS1: Clear CMOS header.

F. JUSBV2: Power source header for

JRJ45USB1. Q. JCI1: Chassis open message header.

G. JCDIN1: CD-ROM audio-in connector. R. JDJ1: Audio DJ header (optional).

H. PCI1~5: Peripherals Component

Interconnect slots. S. AGP1: Accelerated Graphics Port slot.

I. JUSB2/3: Front USB ports headers. T. DDRA1/A2/B1/B2: DDR Memory

modules.

J. JUSBV3_4: Power source header for

JUSB2/3. U. JCFAN1: CPU fan header.

K. JSFAN1: System fan header.

I86PE-A7

Chapter 2: Hardware Installation

2.1 CENTRAL PROCESSING UNIT (CPU)

Special Notice:

Remove Pin Cap before installation, and make good preservation for future use.

When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin

legs won’t be damaged.

pin cap

Step 1: Pull the lever sideways away from the socket and then raise the

lever up to a 90-degree angle.

Step 2: Look for the black cut edge on socket, and the white dot on CPU

should point wards this black cut edge. The CPU will fit only in the

correct orientation.

Step 2-1:

I86PE-A7

Step 2-2:

Step 3: Hold the CPU down firmly, and then close the lever to complete

the installation.

Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN

power cable to the JCFAN1. This completes the installation.

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan

wiring and plug may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to

pin#1.

CPU FAN Header: JCFAN1 Pin Assignment

1 Ground

2 +12V

3 FAN RPM rate sense

JCFAN1

4 Smart Fan Control

System Fan Header: JSFAN1 Pin Assignment

1 Ground

2 +12V

JSFAN1 3 FAN RPM rate sense

Note:

The JCFAN1 and JSFAN1 support 4-pin and 3-pin head connector.

When connecting with wires onto connectors, please note that the red

wire is the positive and should be connected to pin#2, and the black

wire is Ground and should be connected to GND.

I86PE-A7

2.3 MEMORY MODULE INSTALLATION

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a

DIMM on the slot such that the notch on the DIMM matches the

break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining

chip snap back in place and the DIMM is properly seated.

Note:

To assure the system safety, if you need to change DDR modules, firstly,

please unplug the 20-pin power cable with the power connector, and

then you can change the modules. Afterwards, plug in the cable the

power connector again, and finally you can boot up the system.

Otros manuales para I86PE-A7

Tabla de contenidos

Otros manuales de Placa madre de Biostar

Biostar

Biostar Z270GT9 Manual de usuario

Biostar

Biostar M7 VIF Manual de usuario

Biostar

Biostar B560M-SILVER Manual de usuario

Biostar

Biostar M6VZK Manual de usuario

Biostar

Biostar N68S3B Manual

Biostar

Biostar A88M Guía del usuario

Biostar

Biostar 945GC-M4 - BIOS Manual de usuario

Biostar

Biostar T5XE CFX-SLI Guía del usuario

Biostar

Biostar M6VLR Manual de usuario

Biostar

Biostar M7TDA Manual de usuario

Biostar

Biostar A740G M2L PLUS - BIOS 2 Manual de usuario

Biostar

Biostar M5VNB Manual de usuario

Biostar

Biostar M7VIW Guía del usuario

Biostar

Biostar H310MDG2 Manual de usuario

Biostar

Biostar P4TCA PRO Instrucciones de funcionamiento e instalación

Biostar

Biostar P4VMA-M Guía del usuario

Biostar

Biostar A770E3+ Guía del usuario

Biostar

Biostar H61MHV3 Manual de usuario

Biostar

Biostar K8T80-A7 Manual de usuario

Biostar

Biostar A10N-9830E Manual de usuario

Biostar

Biostar P4 TDG Manual de usuario

Biostar

Biostar 6100 AM2 Guía del usuario

Biostar

Biostar J1800NH3 Manual de usuario

Biostar

Biostar GF7050V-M7 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario