Biostar EIH11-SWA Manual de usuario

FCC Informaon and Copyright

This equipment has been tested and found to comply with the limits of a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon

against harmful interference in a residenal installaon. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instrucons,

may cause harmful interference to radio communicaons. There is no guarantee that interference

will not occur in a parcular installaon.

The vendor makes no representaons or warranes with respect to the contents here and

specially disclaims any implied warranes of merchantability or tness for any purpose. Further

the vendor reserves the right to revise this publicaon and to make changes to the contents here

without obligaon to nofy any party beforehand.

Duplicaon of this publicaon, in part or in whole, is not allowed without rst obtaining the

vendor’s approval in wring.

The content of this user’s manual is subject to be changed without noce and we will not be

responsible for any mistakes found in this user’s manual. All the brand and product names are

trademarks of their respecve companies.

Dichiarazione di conformità sinteca

Ai sensi dell’art. 2 comma 3 del D.M. 275 del

30/10/2002

Si dichiara che questo prodoo è conforme

alle normave vigen e soddisfa i requisi

essenziali richies dalle direve

2004/108/CE, 2006/95/CE e 1999/05/CE

quando ad esso applicabili

Short Declaraon of conformity

We declare this product is complying with the

laws in force and meeng all the essenal

requirements as specied by the direcves

2004/108/CE, 2006/95/CE and 1999/05/CE

whenever these laws may be applied

2 | Table Of Contents

EIH11-SWA User’s Manual

Table Of Contents

FCC Informaon and Copyright �� 1

Chapter 1: Introducon�� 3

1.1 Before You Start.................................................................................................................. 3

1.2 Specicaons...................................................................................................................... 4

1.3 Rear Panel Connectors........................................................................................................ 5

1.4 Motherboard Layout........................................................................................................... 6

Chapter 2: Hardware installaon�� 7

2.1 Central Processing Unit (CPU)............................................................................................. 7

2.2 Install a Heatsink................................................................................................................. 9

2.3 Connect Cooling Fans ....................................................................................................... 10

2.4 Installing System Memory ................................................................................................ 10

2.5 Expansion Slots ................................................................................................................. 12

2.6 Jumper & Switch Seng................................................................................................... 13

2.7 Headers & Connectors...................................................................................................... 14

Chapter 3: BIOS Setup�� 18

3.1 Main Menu ....................................................................................................................... 19

3.2 Advanced Menu................................................................................................................ 20

3.3 Chipset Menu.................................................................................................................... 32

3.4 Security Menu................................................................................................................... 37

3.5 Boot Menu........................................................................................................................ 39

3.6 Save & Exit Menu.............................................................................................................. 41

Chapter 1: Introducon | 3

EIH11-SWA User’s Manual

Chapter 1: Introducon

1�1 Before You Start

Thank you for choosing our product. Before you start installing the motherboard, please make

sure you follow the instrucons below:

• Prepare a dry and stable working environment with sucient lighng.

• Always disconnect the computer from power outlet before operaon.

• Before you take the motherboard out from an-stac bag, ground yourself properly

by touching any safely grounded appliance, or use grounded wrist strap to remove the

stac charge.

• Avoid touching the components on motherboard or the rear side of the board unless

necessary. Hold the board on the edge, do not try to bend or ex the board.

• Do not leave any unfastened small parts inside the case aer installaon. Loose parts

will cause short circuits which may damage the equipment.

• Keep the computer from dangerous area, such as heat source, humid air and water.

• The operang temperatures of the computer should be 0 to 45 degrees Celsius.

• To avoid injury, be careful of:

Sharp pins on headers and connectors

Rough edges and sharp corners on the chassis

Damage to wires that could cause a short circuit

Note

»The package contents may be dierent due to the sales region or models in which it was sold. For

more informaon about the standard package in your region, please contact your dealer or sales

representave.

4 | Chapter 1: Introducon

EIH11-SWA User’s Manual

1.2 Specifications

CPU

Supports Intel® Skylake & Kabylake processor

Socket 1151 for Intel® Core i7 / i5 / i3 / Penum / Celeron processor

Maximum CPU TDP (Thermal Design Power): 65 Wa

Chipset Intel H110 Chipset

Graphic

Integrated Intel® HD Graphics engine

Dual independent displays as below (Extended mode):

- By using the DDI to VGA Transmier(RTD2168-CG) and supports D-Sub 15 pin VGA output(Max

resoluon up to 1920x1200@60Hz)

- DVI-D

Main Memory 2x DDR4 2133/ 2400 MHz LONG-DIMM slot, Max Supports up to 32 GB Memory

- DDR4 - 2400 for 7th Generaon Intel® Core™ Processor Family

SATA 3x SATA III (6Gb/s) connector

Dual LAN 2x RTL8111H, 10 / 100 / 1000 Mb/s auto negoaon, Half / Full duplex capability

Sound Codec Realtek ALC662 Audio codec on board

Expansion Slots

1x PCI-E 3.0 x16 Slot

1x PCI-E 2.0 x1 Slot

1x M.2 (M Key) Slot: Support SATAIII (6.0 Gb/s) SSD

Back Panel I/O

1x PS/2 Keyboard (Through Y cable support PS/2 KB & Mouse)

1x VGA Connector (D-sub 15 pin)

1x DVI-I Connector

2x COM Port (RS-232)

- COM1 Support RS232/ RS422/ RS485

4x USB 2.0 Connector

2x USB 3.0 Connector

2x LAN port (RJ-45)

3x Audio Jack (Line-in/ Line-out / Mic)

On Board Connectors

& Headers

2 x SATA III connector

1 x 2*5 pins, 2.54pitch front panel header

1 x 2*5 pins, 2.54pitch Digital I/O header

1x 2*5 pins, 2.54pitch 2 USB 2.0 ports wafer connector

1x 2*5 pins, 2.54pitch wafer connector only support power

1 x 2*10 pins, 2.0pitch 2 USB 3.0 ports wafer connector

1 x 1*4 pins, CPU PWM-FAN header

2 x 1*3 pins, System DC-FAN header

1 x 24 pins, ATX power connector

1 x 2*2 pins, 12V power connector

1 x Buzzer

Board Size 220 mm (W) x 244 mm (L), ATX Form Factor

Operaon Temperature 0°C ~ 60°C

Storage Temperature -20°C ~ 80°C

Relave Humidity 10% ~ 90% (non-condensing)

Other Features

ACPI/APM

Power loss recovery

Eup : S5 <0.5W

Watchdog Timer Yes (65536 segments)

RoHS Compliant Yes

OS Support Windows 7 (32/64bits), Windows 8.1 (32/64bits), Windows 10 (32/64bits)

We reserve the right to add or remove support for any OS with or without noce.

Chapter 1: Introducon | 5

EIH11-SWA User’s Manual

1�3 Rear Panel Connectors

COM1: Serial port Connectors (RS-232/RS422/RS485)

RS-232 (Default) RS-422* RS-485*

Pin Assignment

1 Carrier detect (DCD) 422 TXD- 485 DATA-

2 Received data (RXD) 422 TXD+ 485 DATA+

3Transmied data (TXD) 422 RXD+ NC

4 Data terminal ready (DTR) 422 RXD- NC

5 Signal ground (GND) GND GND

6 Data set ready (DSR) NC NC

7 Request to send (RTS) NC NC

8 Clear to send (CTS) NC NC

9*RI, 5V, 12V selected by

(selected by JP1 seng) NC NC

COM2: Serial Port Connectors (RS-232)

Pin Assignment Pin Assignment

1 DCD 2 RXD

3 TXD 4 DTR

5 GND 6 DSR

7RTS 8CTS

9*RI, 5V, 12V selected by (selected by JP2 seng)

Note

»COM1/2 voltage selecon is controlled by JP1/ JP2 setup.

»COM1 (RS-232/422/485) & COM2 (RS-232) selecon is controlled by JSEL1/JSEL2.

6 | Chapter 1: Introducon

EIH11-SWA User’s Manual

1.4 Motherboard Layout

Note

» represents the 1st pin.

Chapter 2: Hardware installaon | 7

EIH11-SWA User’s Manual

Chapter 2: Hardware installaon

2.1 Central Processing Unit (CPU)

Step 1: Locate the CPU socket on the motherboard

Note

»Remove Pin Cap before installaon, and make good preservaon for future use. When the CPU is

removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be damaged.

»The motherboard might equip with two dierent types of pin cap. Please refer below instrucon to

remove the pin cap.

Step 2: Pull the socket locking lever out from the socket and then raise the lever up.

Step 3: Remove the Pin Cap.

8 | Chapter 2: Hardware installaon

EIH11-SWA User’s Manual

Step 4: Hold processor with your thumb and index ngers, oriented as shown. Align the

notches with the socket. Lower the processor straight down without lng or sliding the

processor in the socket.

Note

»Ensure that you install the correct CPU designed for LGA1151 socket.

»The CPU ts only in one correct orientaon. Do not force the CPU into the socket to prevent

damaging the CPU.

Step 5: Hold the CPU down rmly, and then lower the lever to locked posion to complete the

installaon.

Chapter 2: Hardware installaon | 9

EIH11-SWA User’s Manual

2.2 Install a Heatsink

Step 1: Place the CPU fan assembly on top of the installed CPU and make sure that the four

fasteners match the motherboard holes. Orient the assembly and make the fan cable is closest

to the CPU fan connector.

Step 2: Press down two fasteners at one me in a diagonal sequence to secure the CPU fan

assembly in place. Ensure that all four fasteners are secured.

Note

»Do not forget to connect the CPU fan connector.

»For proper installaon, please kindly refer to the installaon manual of your CPU heatsink.

10 | Chapter 2: Hardware installaon

EIH11-SWA User’s Manual

2.3 Connect Cooling Fans

These fan headers support cooling-fans built in the computer. The fan cable and connector

may be dierent according to the fan manufacturer. Connect the fan cable to the connector

while matching the black wire to pin#1.

CPU_FAN1: CPU fan header

Pin Assignment

1 Ground

2+12V

3 FAN RPM rate sense

4 Smart Fan Control (By Fan)

SYS_FAN1/2: System fan header

Pin Assignment

1 Ground

2+12V

3 FAN RPM rate sense

Note

»System Fan Headers support 3-pin head connectors. When connecng with wires onto connectors,

please note that the red wire is the posive and should be connected to pin#2, and the black wire is

Ground and should be connected to GND.

2.4 Installing System Memory

DDR4 Modules

Tabla de contenidos

Otros manuales de Placa madre de Biostar

Biostar

Biostar G41D3 - SET UP Manual de usuario

Biostar

Biostar TA880GB - BIOS Guía del usuario

Biostar

Biostar M7VIS Manual de usuario

Biostar

Biostar TA790GXBE - BIOS Guía del usuario

Biostar

Biostar Racing X570GTA Manual de usuario

Biostar

Biostar TB85-BTC Manual de usuario

Biostar

Biostar TA785-A3 - BIOS Manual de usuario

Biostar

Biostar Hi-Fi B150Z5 Manual de usuario

Biostar

Biostar A68N-5200 Manual de usuario

Biostar

Biostar A785G3 Guía del usuario

Biostar

Biostar U8568 Manual de usuario

Biostar

Biostar M6VZK Manual de usuario

Biostar

Biostar G41 HD Guía del usuario

Biostar

Biostar B550T-SILVER Manual de usuario

Biostar

Biostar G31-M4 Manual de usuario

Biostar

Biostar M7VIG Pro D Manual de usuario

Biostar

Biostar A620MT-E Manual de usuario

Biostar

Biostar M7 VKH Manual de usuario

Biostar

Biostar P4M80-M4 Manual de usuario

Biostar

Biostar M7 VIQ Guía del usuario

Biostar

Biostar TP43 HP - BIOS Guía del usuario

Biostar

Biostar A780L Guía del usuario

Biostar

Biostar P4 TPT Manual de usuario

Biostar

Biostar TB360-BTC D+ Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario