Biostar BIH11-IHP Manual de usuario

FCC Informaon and Copyright

This equipment has been tested and found to comply with the limits of a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon

against harmful interference in a residenal installaon. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instrucons,

may cause harmful interference to radio communicaons. There is no guarantee that interference

will not occur in a parcular installaon.

The vendor makes no representaons or warranes with respect to the contents here and

specially disclaims any implied warranes of merchantability or tness for any purpose. Further

the vendor reserves the right to revise this publicaon and to make changes to the contents here

without obligaon to nofy any party beforehand.

Duplicaon of this publicaon, in part or in whole, is not allowed without rst obtaining the

vendor’s approval in wring.

The content of this user’s manual is subject to be changed without noce and we will not be

responsible for any mistakes found in this user’s manual. All the brand and product names are

trademarks of their respecve companies.

Dichiarazione di conformità sinteca

Ai sensi dell’art. 2 comma 3 del D.M. 275 del

30/10/2002

Si dichiara che questo prodoo è conforme

alle normave vigen e soddisfa i requisi

essenziali richies dalle direve

2004/108/CE, 2006/95/CE e 1999/05/CE

quando ad esso applicabili

Short Declaraon of conformity

We declare this product is complying with the

laws in force and meeng all the essenal

requirements as specied by the direcves

2004/108/CE, 2006/95/CE and 1999/05/CE

whenever these laws may be applied

2 | Table Of Contents

BIH11-IHP User’s Manual

Table Of Contents

FCC Informaon and Copyright �� 1

Chapter 1: Introducon�� 3

1.1 Before You Start.................................................................................................................. 3

1.2 Specicaons...................................................................................................................... 4

1.3 Rear Panel Connectors........................................................................................................ 6

1.4 Motherboard Layout........................................................................................................... 7

Chapter 2: Hardware installaon�� 8

2.1 Central Processing Unit (CPU)............................................................................................. 8

2.2 Install a Heatsink............................................................................................................... 10

2.3 Connect Cooling Fans ....................................................................................................... 11

2.4 Installing System Memory ................................................................................................ 11

2.5 Expansion Slots ................................................................................................................. 13

2.6 Jumper & Switch Seng................................................................................................... 14

2.7 Headers & Connectors...................................................................................................... 14

Chapter 1: Introducon | 3

BIH11-IHP User’s Manual

Chapter 1: Introducon

1�1 Before You Start

Thank you for choosing our product. Before you start installing the motherboard, please make

sure you follow the instrucons below:

• Prepare a dry and stable working environment with sucient lighng.

• Always disconnect the computer from power outlet before operaon.

• Before you take the motherboard out from an-stac bag, ground yourself properly

by touching any safely grounded appliance, or use grounded wrist strap to remove the

stac charge.

• Avoid touching the components on motherboard or the rear side of the board unless

necessary. Hold the board on the edge, do not try to bend or ex the board.

• Do not leave any unfastened small parts inside the case aer installaon. Loose parts

will cause short circuits which may damage the equipment.

• Keep the computer from dangerous area, such as heat source, humid air and water.

• The operang temperatures of the computer should be 0 to 45 degrees Celsius.

• To avoid injury, be careful of:

Sharp pins on headers and connectors

Rough edges and sharp corners on the chassis

Damage to wires that could cause a short circuit

Note

»The package contents may be dierent due to the sales region or models in which it was sold. For

more informaon about the standard package in your region, please contact your dealer or sales

representave.

4 | Chapter 1: Introducon

BIH11-IHP User’s Manual

1.2 Specifications

Specicaons

CPU Socket 1151 for 6th & 7th Gen Intel® Core™ i7/i5/i3 / Penum / Celeron processor

Maximum CPU TDP (Thermal Design Power): 65Wa

Chipset Intel® H110

Graphic

LAN Controller: 2x RTL8111H

Audio Codec: ALC662

Audio Amplier: ALC105

DDI to VGA transmier: RTD2168-CG

EDP to LVDS: RTD2136R

Super IO: IT8786 (ITE)

Main Memory 2x 260 pins socket support DDR4 2133 SO-DIMM , up to 32GB

SATA 3x SATAIII 6Gb/s connector

1x Full Size MiniPCIE, Support mSATA

Ethernet 2x Realtek RTL8111H

10 / 100 / 1000 Mb/s auto negoaon, Half / Full duplex capability

Sound Codec Realtek ALC662+ALC105

Expansion Slots 1x PCI-E x16 Slot

1x mini PCI-E slot half size, support PCIe + USB interface

Graphic Intel® Integrated Graphics

Rear I/O

1x PS/2 - Keyboard Port

1x PS/2 - Mouse Port

1x DB9 connector

1x HDMI connector (4096 x 2160@24Hz)

1x VGA connector

1x DVI connector (1920 x 1200 @60Hz max)

2x LAN Port

2x USB3.1(Gen1) connector

2x USB2.0 connector

3x Audio jacks, support Line In/Line out/Mic

On Board Connectors

& Headers

Expansion slots:

2x 260 pins socket support DDR4 2133 SO-DIMM

3x 1* 7 pins SATA connector

1x Half size miniPCIE slot for PCIE+USB

1x Full size connector, support mSATA

Display:

1x 2* 20 pins(1.0) - header for LVDS colay with eDP

1x 1* 3 pins - header for backlight mode select (18/24bits)

1x 1* 3 pins(2.0) header for LCD panel power (3.3/5V)

1x 1* 3 pins(2.0) header for LCD backlight power (5V/12V)

1x 1* 6 pins header for LED driver

1x 2* 8 pins VGA header

Speaker:

2x 1* 2 pins(2.0) pitch wafer box pin-header for Speaker

1x Buzzer

Serial Ports:

5x 2* 3 pins header for 5V/12V/RI, default RI

5x 2* 5 pins 2.0 pitch pin header for RS232

1x 2* 3 pins 2.0 pitch pin header for COM1 RS232/422/485 change mode Jumper

1x 2* 6 pins 2.0 pitch pin header for COM1 RS232/422/485 change single Jumper

USB:

1x 2* 5 pins(2.0) USB2.0 header

1x 2* 10 pins USB3.0 header

1x 1* 4 pins USB2.0 header for Touch

Power:

1x 2* 10 pins ATX power connector

1x 2* 2 pins ATX power connector

2x 1* 4 pins(2.0) header for 5V/12V output (HDD Power) for open frame PSU

1x 1* 3 pins header for AT/ATX power select jumper

»Connued on Next Page

Chapter 1: Introducon | 5

BIH11-IHP User’s Manual

Specicaons

On Board Connectors

& Headers

Fan:

2x 1* 4pins(2.54) header for CPU/System fan (Smart Fan)

Others:

1x 2* 7pins header for TPM module

1x 2* 5pins (2.0) DIO header (by BIOS seng)

1x 1* 3pins(2.0) header clear CMOS

1x 2* 5pins header for power buon, Reset buon, HDD Led, power LED, Reset LED

Dimensions Mini-ITX From Factor, 170 mm (W) x 170 mm (L)

Operaon Temperature 0°C ~ 60°C

Storage Temperature -10°C ~ 70°C

Relave Humidity 5% ~ 90% (non-condensing)

ESD Contact with 4Kv, Air with 8Kv, Class A

Watchdog Timer Yes (65536 segments),

Reset; 1 sec.~255 min. and 1 sec. or 1 min. /step

RoHS Compliant Yes

OS Support Windows 7, Windows 8.1, Windows 10

We reserve the right to add or remove support for any OS with or without noce.

6 | Chapter 1: Introducon

BIH11-IHP User’s Manual

1�3 Rear Panel Connectors

COM1: Serial port Connectors (RS-232/RS422/RS485)

RS-232 (Default) RS-422* RS-485*

Pin Assignment

1 Carrier detect (DCD) 422 TXD- 485 DATA-

2 Received data (RXD) 422 TXD+ 485 DATA+

3Transmied data (TXD) 422 RXD+ NC

4 Data terminal ready (DTR) 422 RXD- NC

5 Signal ground (GND) GND GND

6 Data set ready (DSR) NC NC

7 Request to send (RTS) NC NC

8 Clear to send (CTS) NC NC

9*RI, 5V, 12V selected by

(selected by JP1 seng) NC NC

Note

»COM1 (RS-232/422/485) & COM2 (RS-232) selecon is controlled by JSEL1/ JSEL2.

Chapter 1: Introducon | 7

BIH11-IHP User’s Manual

1.4 Motherboard Layout

Note

» represents the 1st pin.

8 | Chapter 2: Hardware installaon

BIH11-IHP User’s Manual

Chapter 2: Hardware installaon

2.1 Central Processing Unit (CPU)

Step 1: Locate the CPU socket on the motherboard

Note

»Remove Pin Cap before installaon, and make good preservaon for future use. When the CPU is

removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be damaged.

»The motherboard might equip with two dierent types of pin cap. Please refer below instrucon to

remove the pin cap.

Step 2: Pull the socket locking lever out from the socket and then raise the lever up.

Step 3: Remove the Pin Cap.

Chapter 2: Hardware installaon | 9

BIH11-IHP User’s Manual

Step 4: Hold processor with your thumb and index ngers, oriented as shown. Align the

notches with the socket. Lower the processor straight down without lng or sliding the

processor in the socket.

Note

»Ensure that you install the correct CPU designed for LGA1151 socket.

»The CPU ts only in one correct orientaon. Do not force the CPU into the socket to prevent

damaging the CPU.

Step 5: Hold the CPU down rmly, and then lower the lever to locked posion to complete the

installaon.

10 | Chapter 2: Hardware installaon

BIH11-IHP User’s Manual

2.2 Install a Heatsink

Step 1: Place the CPU fan assembly on top of the installed CPU and make sure that the four

fasteners match the motherboard holes. Orient the assembly and make the fan cable is closest

to the CPU fan connector.

Step 2: Press down two fasteners at one me in a diagonal sequence to secure the CPU fan

assembly in place. Ensure that all four fasteners are secured.

Note

»Do not forget to connect the CPU fan connector.

»For proper installaon, please kindly refer to the installaon manual of your CPU heatsink.

Tabla de contenidos

Otros manuales de Placa madre de Biostar

Biostar

Biostar M7 SUA Manual de usuario

Biostar

Biostar M7VIT Bravo Guía del usuario

Biostar

Biostar 6100 AM2 Guía del usuario

Biostar

Biostar P4 SFA Guía del usuario

Biostar

Biostar P4TDK Manual de usuario

Biostar

Biostar A740G M2L PLUS - BIOS 2 Guía del usuario

Biostar

Biostar X470NH Manual de usuario

Biostar

Biostar P4 VTB Manual de usuario

Biostar

Biostar TP43E HP - BIOS Guía del usuario

Biostar

Biostar A55MH Guía del usuario

Biostar

Biostar NF325-A7 Guía del usuario

Biostar

Biostar TA870 - BIOS Manual de usuario

Biostar

Biostar P4 TPT Manual de usuario

Biostar

Biostar NF520-A2 TE - BIOS SETUP Guía del usuario

Biostar

Biostar K8M800 MICRO AM2 Manual de usuario

Biostar

Biostar P43D3+ Guía del usuario

Biostar

Biostar M7VKF Manual de usuario

Biostar

Biostar 945GC-M7 TE Guía del usuario

Biostar

Biostar U8638 Guía del usuario

Biostar

Biostar 945GC-230 - BIOS Manual de usuario

Biostar

Biostar TPOWER I55 Guía del usuario

Biostar

Biostar T5XE CFX-SLI Manual

Biostar

Biostar J3160MD Guía del usuario

Biostar

Biostar TH67XE - BIOS Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario