Biosan Inteliwasher 3D-IW8 Manual de usuario

Find out about our special offer

on https://biosan.lv/classes-en

2 Edition 3.03

If you have any feedback on our products or services, we would like to hear from you.

Please send all feedback to:

Manufacturer:

SIA Biosan

Ratsupites7 k-2, Riga, LV-1067, Latvia

Phone: +371 674 261 37

Fax: +371 674 281 01

https://biosan.lv

Marketing: [email protected]

Service: [email protected]

Edition 3.03 3

Contents

1. About this edition of user instructions.......................................................................3

2. Safety precautions ...................................................................................................4

3. General information..................................................................................................6

4. Getting started..........................................................................................................8

5. Operation ...............................................................................................................12

6. Operation closedown .............................................................................................17

7. Specifications.........................................................................................................18

8. Ordering information ..............................................................................................19

9. Care and maintenance...........................................................................................20

10. Storage and transportation.....................................................................................23

11. Warranty.................................................................................................................24

12. EU declaration of conformity..................................................................................25

1. About this edition of user instructions

1.1 The current edition of the user instructions applies to the following models:

Model and name

Version

FTA-1, aspirator with trap flask

V.4AW

1.2 Edition 3.03 –August of 2022.

4 Edition 3.03

2. Safety precautions

Caution!

Please make sure you have fully read and understood current instructions

before using the equipment and pay special attention to sections marked

by this symbol.

2.1 Icons used on the unit and packaging

CE marking, manufacturer affirms conformity with European health, safety, and environ-

mental protection standards, see 12.1

WEEE directive marking, see 12.1

Polarity of the power connector

Equipment uses direct current

Warning: Always perform the rinsing cycle using distilled water and dry the system after

operation. This will keep the unit in working order and prevent channel clogging.

2.2 General safety precautions

•The protection provided can be ineffective if the operation of the appliance does not

comply with the manufacturer's requirements.

•Save the unit from shocks and falling.

•Store and transport the unit as described in section 10. Storage and transportation.

•Use only original parts and accessories, provided by manufacturer for this product.

•Before using any cleaning or decontamination methods except those recommended

by the manufacturer, check with the manufacturer that the proposed method will not

damage the equipment.

•Do not make modifications in design of the unit.

2.3 Electrical safety

•Connect only to an external power supply with voltage corresponding to that on the

serial number label.

•Use only the external power supply provided with this product.

•Do not plug the power supply into an ungrounded power socket, and do not use an

ungrounded extension lead.

•Ensure that the switch and external power supply connector are easily accessible

during use.

•Disconnect the unit from the mains before relocating it.

•If liquid penetrates into the unit, disconnect it from the mains and do not use it until it

is checked by a repair and maintenance technician.

•Do not operate the unit in premises where condensation can form. Operating condi-

tions of the unit are defined in section 7. Specifications.

Edition 3.03 5

2.4 During operation

•Do not operate the unit in environments with aggressive or explosive chemical mix-

tures. Please contact manufacturer for possible operation of the unit in specific at-

mospheres.

•Before changing the manifold, the bottles or the tubes, disconnect the unit from the

mains.

•Do not operate the unit if it is faulty.

•Always have the cover protecting against aerosol spread (hereinafter protective

cover) installed during operation.

•Do not operate the unit without the manifold installed.

•Do not operate the unit if any of the needles is clogged or malfunctions.

•Never touch the needles or place fingers or other parts under the needles during

operation. Manifold needles are sharp and can cause injury.

•If liquid spills on the guiding rail, stop the operation, clean and wipe the surface dry.

•Do not allow the waste bottle to overflow the maximum level during operation (there

is a mark on the side surface of the bottle). Take necessary precautions utilizing

waste liquid in accordance with general laboratory standards.

2.5 After operation

•Carry out the cycle of system washing as described in section 6. Operation

closedown. This will keep the system in permanent operation condition.

•Clean the guiding rail under the platform and wipe it dry to prevent oxidation layer

formation and to prolong working life of the unit.

2.6 Biological safety

•It is the user’s responsibility to carry out appropriate decontamination if hazardous

material is spilt on or penetrates into the equipment.

•In diagnostic research, potentially dangerous biological materials can be used. When

working with such materials, always use protective clothing and eye protection. Al-

ways have the protective cover installed during operation.

6 Edition 3.03

3. General information

Inteliwasher 3D-IW8 series microplate washer is designed for washing various types

of standard microplates, microstrips and microarrays onFastFRAME (rectangular well shape

frame). Washer is suitable for washing wells with different bottom shapes, flat, U-shape and

V-shape. The unit is fully programmable, ensuring multi-step solution ripening, aspiration

and soaking cycle during a particular period of time, as well as combinations of aspiration,

liquid dispensing and soaking.

The unit has 50 programs divided into 5 following aspiration categories (Scheme 1):

•Type 1 (programs 1.0–1.9) IPF96 U/V is intended for U-shape and V-shape immuno-

plates, 1 point aspiration.

•Type 2 (2.0–2.9) IPF96 FLAT-2 is intended for flat-bottom shape immunoplates, 2-

point aspiration.

•Type 3 (3.0–3.9) IPF96 FLAT-C is intended for rectangular shape immunoplates, full-

circle aspiration direction.

•Type 4 (4.0–4.9) FastFRAME-2 is intended for multi-slide

plate with rectangular

wells.

•Type 5 (5.0–5.9) FastFRAME-C is intended for multi-slide1plate with rectangular

wells.

Figure 1. Aspiration methods

The FastFRAME (Schleicher&Shuell) multi-slide plate or analog plate of another manufac-

turer, that is compatible with standard 1 x 3 inch (25 x 76 mm) glass slides.

Edition 3.03 7

Optional 4-channel washing solution weight logger, 4CHW Logger allows automatic

buffer bottles and waste bottle volume control.

The unit is supplied with 8-channel washing head for dispensing/aspiration, 3 bottles for

washing and rinsing solutions, a large waste bottle and small aerosol catching bottle with hydro-

phobic filter that eliminates risk of contamination with bacteria, viruses and infected particle from

wasted liquid to an atmosphere. Hydrophobic filter bacterial efficiencies are exceedingly high,

up to 99.999% particles bigger than 0.027 μm (which is smaller than Hepatitis A, B and C).

The unit provides:

•washing mode;

•rinsing mode;

•mixing mode;

•single point, two point, circular (circle or rectangular path);

•possibility of additional solution mixing during time gap between two work cycles;

•possibility to use microtest plates by different manufacturers, ensured by automated

plate set up (adjusting to different depths of plate wells);

•round-bottom plate and strip washing mode;

•possibility of user-defined programs with adjustable parameters.

8 Edition 3.03

4. Getting started

4.1 Unpacking. Remove packing materials carefully and retain them for future shipment

or storage of the unit. Examine the unit carefully for any damage incurred during

transit. The warranty does notcover in-transit damage. Warrantycovers only the units

transported in the original package.

4.2 Complete set. The set includes:

Name

Quantity

Inteliwasher 3D-IW8, microplate washer

1 pce.

Platform for plates

1 pce.

Manifold

1 pce.

Protecting cover

1 pce.

External power supply

1 pce.

Tubes (outside/inside diam./length 6/3/600 mm)

5 pcs.

Tube for manifold (outside/inside diam./length 3.2/1.6/400 mm)

1 pce.

Tube for manifold (outside/inside diam./length 5/3/440 mm)

1 pce.

Tube for hydrophobic filter (outside/inside diam. 9/6 mm)

1 pce.

Half-litre bottle with connectors for aerosol collection

1 pce.

1-litre bottles with sieve filters and connectors for reagents

3 pcs.

2-litre bottle with connector for collecting of waste liquid

1 pce.

Hydrophobic filters for half-litre bottle

2 pcs.

Manifold cleaning set

1 pce.

Syringe for liquid flushing in hoses

1 pce.

Power cord

1 pce.

User instructions, declaration of conformity

1 copy

4-channel washing solution weight logger, 4CHW Logger (on request)

1 set

Edition 3.03 9

Figure 2. Complete set

Figure 3. Unit side and back overview. Setting up.

10 Edition 3.03

Figure 4. Rear panel

Figure 5. Bottles and tubing

Otros manuales para Inteliwasher 3D-IW8

Tabla de contenidos

Otros manuales de Arandela de Biosan

Biosan

Biosan IW-8 Manual de usuario

Manuales populares de Arandela de otras marcas

Tricity Bendix

Tricity Bendix AW 1000 W Guía del producto

Panasonic

Panasonic NA-F60L5WRB Manual de usuario

GE WSLP1500 Manual

Electrolux

Electrolux EWF1284EDW Manual de usuario

Bosch

Bosch WAN2829BSN Manual de usuario

LG TV2516DV3B Manual de usuario

LG TH2517DSAV Manual de usuario

VESTEL

VESTEL CMH-XL 7510 TE Manual de usuario

AEG

AEG 74335 Manual de operación

Johnson

Johnson JWF721A Manual de usuario

Beko

Beko WTE7604XLW0 Manual de usuario

Danby

Danby DTT100A1WDB Instrucciones de montaje

Amica

Amica WA 14 Ex Manual de usuario

Daewoo

Daewoo DWD-F1222 Manual de usuario

Bosch

Bosch WAS28461AU Manual de usuario

Miele

Miele PW 6080 Vario Manual de usuario

Finlux

Finlux FLX108CF220 Manual de usuario

Whirlpool

Whirlpool 3LBR5132AN0 Manual de usuario