Biochef Gemini Especificaciones técnicas
Gemini
Twin Gear Cold Press Juicer
USER MANUAL AND RECIPES
The information in this
manual is intended to help
you to get the best results
from your BioChef Gemini
Twin Gear Cold Press Juicer.
Please read and follow
these instructions and
safeguards prior to use.
Please keep your manual
handy for future reference,
warranty information and
support details.
3
Contents
Safety Precautions 4
Parts and Accessories 5
Assembly Instructions 6
Operating Instructions 9
Troubleshooting 11
FAQs 13
Cleaning 16
Recipes 17
Warranty 25
.
EN
4
Safety Precautions
! Read all instructions.
! To protect against risk of electrical shock, do not put the body (motor) in
any water or other liquid .
! Close supervision is necessary when any appliance is used by children.
! Unplug from electrical outlet when not in use and before disassembly
for cleaning.
! Avoid contact with moving parts.
! Do not operate appliance with a damaged cord or plug.
! The use of attachments not recommended or sold by the manufacturer
may cause damage and will void warranty.
! Do not let cord hang over edge of counter.
! Always make sure juicer locking clip is closed while juicer is in operation.
! Make sure the motor has stopped completely before disassembling.
! Do not put your ngers or other objects into the juicer while it is in
operation. If food becomes lodged in the opening, use the provided
food plunger to push it down or press the button into reverse mode. If
ingredients are still lodged in the juicing drum, turn o and disassemble
to remove remaining food. You may need to cut produce smaller, or feed
ingredients slower into the chute to prevent this.
EN
5
Parts and Accessories
1 Motor Body
2 Hopper
3 Drum
4 Fine Screen
5 Coarse Screen
6 Blank Screen
7 Twin Gear
8 Drum Cap
9 Drum Lock
10 Pulp Cap
11 Sieve
12 Juice Container
13 Pulp Container
14 Locking Handle
15 Wooden Tamper
16 Plastic Tamper
17 Cleaning Brush
1
2
5
4 3
6
78910
11121314151617
EN
6
1. Set the drum locking device of
the main body to ‘OPEN’.
2. Assemble the feeding entrance
and the drum, connect the
drum to the main body, and
then close the locking device
by turning it to ‘CLOSE’.
3. As shown in the picture, match
the Twin Gear to the one point
between the two points.
DRUM LOCKING
Assembly Instructions
EN
7
R
L
UP
4. With the gear on
the right, which has
the axis of the Twin
Gear, x it to the
drum together with
your desired screen.
5. When placing the Drum
Cap over the gears, the
word ‘UP’ on the drum cap
should be located on the
upper part of it.
6. When assembling, turn the
drum lock clockwise.
The white portion of the gear shall be completely
inserted into the screen. If it is not inserted easily,
turn the end of the gear when inserting it. (If it is
not inserted completely, the drum cap cannot be
assembled.)
EN
8
7. When assembling, turn
the pulp cap clockwise.
8. Place the juice and pulp
containers ready for juicing.
EN
9
Assembling the Twin Gears
You will see two red dots on
the ‘male’ gear head and one
on the ‘female’ gear. Make sure the
single dot is placed between the
double dots.
If the Twin Gears stop while the
motor is turned on
Press and hold down the REV
(reverse) button to wind back
ingredients which may have
blocked the forward motion
of the gears.
CAUTION Do not operate with
wet hands.
Assembling the drum cap
and the pulp cap
Match the pulp cap with the
groove of the drum cap.
Operating Instructions
ON
REV
EN
10
Adjusting the Pulp Cap
The pulp cap adjusts the pressure inside the
juicer.
CLOCKWISE DIRECTION
Position 1 will apply maximum pressure inside the
juicing head. This is best for brous vegetables
such as carrots, beetroot and leafy greens.
COUNTERCLOCKWISE DIRECTION
When extracting juice from pulpy or softer
produce like citrus, turn the dial counter clockwise
to position 3. This will allow more room (less
pressure) in the juicing head.
Choosing the Screen
FINE SCREEN
The Fine Screen is best for hard or brous
vegetables such as carrot, beetroot and
leafy greens. It is very important to cut up the
ingredients in the correct way to get the most
out of this twin gear mechanism.
COARSE SCREEN
The Coarse Screen should be used if the majority
of your juicing ingredients are pulpy. This would
be the case if you are doing a fruit juice.
BLANK SCREEN
The Blank Screen turns the juicer into a mincer.
Use this for making nut butter, dips, sorbet and
other food processing.
EN
Tabla de contenidos
Otros manuales de Exprimidor de Biochef
