Bigben VLOGKITPINCEB Manual de usuario

REF :

VLOGKITPINCEB

USER MANUAL

GUIDE D’INSTALLATION

BEDIENUNGSANLEITUNG

GEBRUIKERSHANDLEIDING

MANUAL DE USUARI

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUÇÕES

INSTRUKCJA UŻYTKOWNIKA

MANUAL DE UTILIZARE

SOMMAIRE :

EN..................................................4

FR..................................................7

DE..................................................10

NL..................................................13

ES..................................................16

IT..................................................19

PT..................................................22

PL..................................................25

RO..................................................28

EN VLOGKITPINCEB USER MANUAL

Thank you for choosing our product.

1 - Attach the vlogging kit to a

table or other furniture that can

accommodate it. Then orient the

exible arms in the position you want.

2 - Install your phone in the universal

phone holder.

3 - Then connect the kit to a 2A

power source (compliant with

European standards), via USB A port.

The installation is completed. You can

now take advantage of your vlogging

kit. To change the intensity of the

Flash, use the remote control.

1 - Attach the vlogging kit to a

table or other furniture that can

accommodate it. Then orient the

exible arms in the position you want.

2 - Install your phone in the universal

phone holder.

3 - Then connect the kit to a 2A

power source (compliant with

European standards), via USB A port.

The installation is completed. You can

now take advantage of your vlogging

kit. To change the intensity of the

Flash, use the remote control.

Read the manual carefully before use. Keep the manual for future use. Handle your device,

charger and accessories with care. The following suggestions will help keep your device working

properly. Keep the device dry. Rainwater, moisture and liquids contain minerals that can damage

electronic circuits. Do not handle the appliance with wet hands, Do not immerse the device in any

liquid, Use the charger only for its intended purpose. Inappropriate use, or use of incompatible

chargers may present a risk of re, explosion or other hazards. Never use a damaged charger,

Do not attempt to charge a device with a damaged, cracked or open battery case, Do not use or

store your device in a dusty or dirty location, Do not store the device in high-temperature areas.

High temperatures can damage the device, Do not store the device in low-temperature areas.

When the device returns to its normal temperature, moisture may form inside and damage it,

You risk damaging the device and violating the regulations covering high-frequency transmission

equipment if you make unauthorised adaptations, Do not drop or strike the device or battery, or

shake them. Rough handling could break it, Use only a soft, clean, dry cloth to clean the device.

The device may become hot during prolonged use. In most cases, this is normal. If the device does

not operate properly, contact your nearest authorised service centre, Keep the device out of the

reach of children.

DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT

This symbol on the product or on its packaging indicates that this product shall not be

treated as household waste. Instead it should be taken to an applicable collection point

for the recycling of electrical and electronic equipment.

By ensuring that this equipment is disposed of correctly you will help prevent potential

negative consequences for the environment and human health, which could otherwise be caused

by inappropriate waste handling of this product. The recycling of materials will help to conserve

natural resources. For more information please contact your local council or waste disposal service.

Safety and precautions:

1. This product is solely designed to be used indoors.

2. Do not expose it to dust, direct sunlight, extreme humidity or heat, or to any mechanical shock.

3. Do not expose it to humidity or any liquid or mildew. Do not immerse it in a liquid.

4. Do not dismantle this product.

5. Do not use the product if it is damaged.

6. Never hold this product by the cables

7. To clean the outside, use a soft, clean and slightly damp cloth.

8. Using solvents may irreversibly damage the product.

9. Only use the cable provided; any other cable may render the device unsafe to use.

10. The power socket must be located near the device and must be easily accessible.

11. If the power cable is damaged, it must be replaced by the manufacturer, the manufacturer’s

after-sales department or other qualied personnel in order to prevent any danger.

12. This device was not designed to be used by persons (including children) whose physical,

sensory or mental abilities are reduced, nor by persons lacking in experience or knowledge, except

if they have beneted from supervision or prior instruction concerning the use of the device by a

person responsible for their safety. Children must be supervised to ensure that they do not play

with the device.

13. Make sure that the cables do not aect or inhibit the use of a vehicle in any way.

For any information, please contact the Hotline service.

Before making any call, please make sure you have as much information as possible about the

problem encountered and the product.

E-mail: [email protected]

Internet site: www.bigben.fr

FR GUIDE D’INSTALLATION VLOGKITPINCEB

Merci d’avoir choisi notre produit.

1 - Fixez le vlogging kit sur une table

ou autre meuble pouvant l’accueillir.

Puis orienter les bras exible dans la

position que vous souhaitez.

2 - Installez votre téléphone dans le

berceau universel.

3 - Puis branchez le kit sur une source

d’alimentation de 2A (conforme aux

normes européennes), via le port

USB A.

L’installation est terminée. Vous

pouvez proter de votre vlogging kit.

Pour changer d’intensité du Flash,

servez vous de la télécommande.