BIG TREE TECH MINI12864 Manual de usuario
Shenzhen BIGTREE technology co., LTD.
BIG TREE TECH
BIGTREETECH
MINI12864
User Guide
Shenzhen BIGTREE technology co., LTD.
BIG TREE TECH
1 Product introduction
BIGTREETECH Mini12864 V1.0 is a medium-sized 3D printing display
with RGB backlight which is launched by Shenzhen BIGTREETECH
Technology Co., Ltd. 3D printing Team.
1. Features：
1) Mini12864 includes EXP1, EXP2, where EXP1 and EXP2 are LCD screen
interfaces for ordinary motherboards.
2) It features multicolored RGB backlight, making it look cooler.
2. Specification：
Appearance size: 104.99mm * 47mm
Mounting size: More details see mini 12864 size
Power input: DC 5V
SD card logic voltage: 3.3V and 5V (e.g. Higher compatibility for the
motherboard with MEGA2560 main control chip)
Shenzhen BIGTREE technology co., LTD.
BIG TREE TECH
2 Interfaces on the screen
1. Dimensions
Notes:
1. Same as LCD 12864, it connects with EXP1 and EXP 2 of the
motherboard.
2. The backlight can be set with its interface.
Shenzhen BIGTREE technology co., LTD.
BIG TREE TECH
3 Firmware Instructions
The screen will be shipped with a test firmware,which can be used
directly, or upgraded according to the firmware updates at our Github
website.
1. How to obtain firmware
Ask our service person or technicians to get it；
Log in to our Github website to download:https://github.com/bigtreetech
2. How to update the Firmware
①In Configuration.h
Uncomment FYSETC_MINI_1286421 and NEOPIXEL LED
②Search for u8g.setContrast at ultralcd_DOGM.cpp
Then u8g.setContrast(contrast) change to u8g.setContrast(255);
Shenzhen BIGTREE technology co., LTD.
BIG TREE TECH
3、How to use
Power on, and then press rotary encoder
Then click Lights
Click into Lights, then click on the new Lights: “on or off”, select RGB “on and
off”
Shenzhen BIGTREE technology co., LTD.
BIG TREE TECH
RGB display can be set with Light Presets
4 Notes:
1. The wiring process must be carried out under the premise of power loss,
after checking that the line is properly connected and the drive is inserted
correctly before powering up, to prevent the fault wire from causing the
board and screen to burn, resulting in unnecessary damage;
If you also encounter other problems in use, you are welcome to contact
us, we will be patient to answer for you, if you have any good comments
or suggestions on our products, you are also welcome to give back to us,
we will carefully consider your comments or suggestions, thank you for
choosing BIGTREETECH products, thank you!
Tabla de contenidos
Otros manuales de Monitor de BIG TREE TECH
BIG TREE TECH
BIG TREE TECH TFT35 Manual de usuario
BIG TREE TECH
BIG TREE TECH TFT35 V3.0 Manual de usuario
BIG TREE TECH
BIG TREE TECH TFT24-V1.1 Manual de usuario
BIG TREE TECH
BIG TREE TECH TFT35 E3 V3.0 Manual de usuario
BIG TREE TECH
BIG TREE TECH KNOMI 2 Manual de usuario
BIG TREE TECH
BIG TREE TECH TFT35 SPI V2.1 Manual de usuario
BIG TREE TECH
BIG TREE TECH TFT70 V3.0 Manual de usuario
