Big Lots CAL-174203A Manual de usuario
42 INCH LED PORTABLE AND WALL HUNG FIREPLACE
SKU NO.: 810394426
ITEM NO.: CAL-174203A
IMPORTANT INSTRUCTIONS
Please read Electric Fireplace User Manual before assembly and install.
* Please do not return any products to the store, for any missing or replacement parts for electric fireplace insert,
wood pieces or hardware, please contact BIGLOTS Customer Service. Phone: 888-829-1658
Working Hours: Monday - Friday, 9:00AM - 5:00PM (Pacific Standard Time)
PAGE 1 OF 22
PAGE 2 OF 22
IMPORTANT SAFETY INSTRUCTIONS
SKU NO.: 810394426
ITEM NO.: CAL-174203A
WARNING: Any use of this appliance other than that recommended by the manufacturer in this
owners manual may cause fire, burns, electric shock and/or other serious in juries or death.
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire,
electrical shock, and injury to persons including the following:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
Read all instructions before installing or using the heater.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
WARNING: In order to avoid overheating, do not cover the heater.
The heater must not be located immediately below a socket-outlet.
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
This appliance is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. Keep
combustible material, such as furniture, pillows, bedding, papers, clothes and curtains, at least 3 feet from
the front of the heater and keep them away from the side and rear.
Extreme caution is necessary when any heater is used by or near children or individuals with disabilities and
whenever the fireplace is left operating and unattended.
ALWAYS unplug this appliance when not in use.
DO NOT operate any heater with a damaged cord or plug or after the heater malfunctions. DO NOT operate
any heater if it has been dropped or damaged in any manner. Discard heater, or return to authorized service
facility for examination and/or repair.
DO NOT use outdoors.
This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. NEVER place
heater where it may fall into a bathtub or other water container.
DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or similar covering. Do not
route cord under furniture or appliances. Arrange cord away from traffic areas and where it will not be tripped
over.
To disconnect this appliance, turn controls to the off position, then remove plug from outlet.
ONLY connect to properly-grounded outlets.
Do NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an
electric shock or fire, or damage the appliance.
To prevent a possible fire, DO NOT block air intakes or exhaust in any manner. DO NOT use on soft
surfaces, like a bed, where opening may become blocked.
Use this appliance only as described in the manual. Any other use is NOT recommended by the
manufacturer and may cause fire, electric shock or injury to persons.
This appliance has hot and arcing or sparking parts inside. DO NOT use it in areas where gasoline, paint or
flammable vapors or liquids are used or stored. This fireplace should not be used as a drying rack for
clothing. Christmas stockings or decorations should not be hung in the area of it.
ALWAYS plug heaters directly into a wall outlet/receptacle. NEVER use with an extension cord or
re-locatable power tap (outlet/power strip).
This appliance, when installed, must be electrically grounded in accordance with local codes, with the current
CSA C22.1 Canadian Electrical Code or follow the National Electrical Code, ANSI/NFPA N0.70.
PAGE 3 OF 22
IMPORTANT SAFETY INSTRUCTIONS
SKU NO.: 810394426
ITEM NO.: CAL-174203A
Electrical Connection
A 15-amp, 120-volt, 60 Hz circuit with a properly grounded outlet is
ƌĞƋƵŝƌĞĚWƌĞĨĞƌĂďůLJƚŚĞĮƌĞƉůĂĐĞǁŝůůďĞŽŶĂĚĞĚŝĐĂƚĞĚĐŝƌĐƵŝƚĂƐŽƚŚĞƌappliances on the same circuit may cause the circuit breaker to trip or
ƚŚĞĨƵƐĞƚŽďůŽǁǁŚĞŶƚŚĞŚĞĂƚĞƌŝƐŝŶŽƉĞƌĂƟŽŶdŚĞƵŶŝƚĐŽŵĞƐƐƚĂŶĚĂƌĚǁŝƚŚϲͲŌƚŚƌĞĞͲǁŝƌĞĐŽƌĚĞdžŝƟŶŐĨƌŽŵƚŚĞƌĞĂƌŽĨƚŚĞĮƌĞƉůĂĐĞKEKdĞdžĐĞĞĚƚŚĞĐƵƌƌĞŶƚƌĂƟŶŐŽĨƚŚĞĐƵƌƌĞŶƚƚĂƉ>tz^ƉůƵŐŚĞĂƚĞƌƐĚŝƌĞĐƚůLJŝŶƚŽĂǁĂůůŽƵƚůĞƚƌĞĐĞƉƚĂĐůĞEsZƵƐĞǁŝƚŚĂŶĞdžƚĞŶƐŝŽŶĐŽƌĚŽƌƌĞůŽĐĂƚĂďůĞƉŽǁĞƌƚĂƉ;ŽƵƚůĞƚƉŽǁĞƌƐƚƌŝƉͿ•dŚŝƐŚĞĂƚĞƌŝƐĨŽƌƵƐĞŽŶϭϮϬǀŽůƚƐdŚĞĐŽƌĚŚĂƐĂƉůƵŐĂƐƐŚŽǁŶ^ĞĞŝůůƵƐƚƌĂƟŽŶĨŽƌŐƌŽƵŶĚŝŶŐŝŶƐƚƌƵĐƟŽŶŶĂĚĂƉƚĞƌĂƐƐŚŽǁŶĂƚŝƐĂǀĂŝůĂďůĞĨŽƌĐŽŶŶĞĐƟŶŐƚŚƌĞĞͲďůĂĚĞŐƌŽƵŶĚŝŶŐƚLJƉĞƉůƵŐƐƚŽƚǁŽͲƐůŽƚƌĞĐĞƉƚĂĐůĞƐdŚĞŐƌĞĞŶŐƌŽƵŶĚŝŶŐůƵŐĞdžƚĞŶĚŝŶŐĨƌŽŵƚŚĞĂĚĂƉƚĞƌmust be connected to a permanent ground such as a properly
ŐƌŽƵŶĚĞĚŽƵƚůĞƚďŽdždŚĞĂĚĂƉƚĞƌƐŚŽƵůĚŶŽƚďĞƵƐĞĚŝĨĂƚŚƌĞĞͲƐůŽƚgrounded receptacle is available.
•sŽůƚĂŐĞϭϮϬsϲϬ,njŵƉƐϭϭϳŵƉƐtĂƩƐϭϰϬϬtĂƩƐELECTRICAL SPECIFICATIONS
Grounding Pin
Metal
^ĐƌĞǁŽǀĞƌŽĨGrounding
ŽdžGrounding Pin
Grounding Means
Adapter AB
SAVE THESE INSTRUCTIONS
CAUTION: DO NOT place any objects on top of insert and top air intake vents as this will cause unit to
overheat and can cause a fire.
CAUTION: If the information in this manual is not followed exactly, an electric shock or re may result
causing property damage, personal injury or loss of life.
CAUTION: Under no circumstances should this replace be modified. Parts having to be removed for
servicing must be replaced prior to operating this replace again.
CAUTION: There is a thermostat protective device provide inside of unit. If the inner temperature
overheats or abnormal heating occurs, the thermostat protective device will cut off power supply to
prevent damage or risk of fire.
CAUTION: The heaters MUST NOT be located immediately below a socket-outlet.
CAUTION: Any repairs to this fireplace should be carried out by a qualified service person.
IMPORTANT SAFETY INSTRUCTIONS
PAGE 4 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
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• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Modifications not approved by the party responsible for compliance could void user’s authority to operate the
equipment.
This Class B digital apparatus complies with Canadian ICES-003.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
PRE-INSTALLATION
PAGE 5 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
HARDWARE LIST
AA 4 PCS
SCREW (4*38MM)
BB 4 PCS
WALL ANCHOR
CC 4 PCS
SCREW (M6*12)
DD 2 PCS
SCREW (M4*8)
PARTS LIST
A 1 PC
ELECTRIC FIREPLACE
B 1 PC
LEFT FEET
C 1 PC
RIGHT FEET
D 1 PC
WIND SHIELD
E 1 PC
GLASS PNAEL
F 1 PC
REMOTE CONTROL
G Varies
ACRYLIC BEADS
H 1 PC
MOUNTING TEMPLATE
1024mm
MOUNTING TEMPLATE
295mm
PRE-INSTALLATION
PAGE 6 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
IMPORTANT:
Please read and understand this manual before any assembly. Before beginning assembly of
product, make sure all parts are present. Compare parts with packaging contents list. If any
part is missing, or if you have any questions, contact the service center.
3ODFHDOOSDUWVIURPWKHER[LQDFOHDUHGDUHDDQGSRVLWLRQWKHPRQWKHÀRRULQIURQWRI\RXRemove all packing materials and place them back into the box. Do not dispose of the
packing materials until assembly is complete. Read each step carefully before beginning any
assembly and make sure you understand each step. If you are missing a part, please call for
assistance.
Before you install
Before installing your new fireplace, decide whether you want to install your new fireplace
using a surface mount or freestanding.
Select a location that is not susceptible to moisture, dust and is away from high traffic
locations and things that many catch fire or block openings such as drapes, pillows,
furniture etc.
It is strongly recommended that the screws be screwed into the wall studs where possible.
If the wall studs cannot be used, wall anchors must be used.
CAUTION: Enclosed wall anchors (BB) only can be use on the concrete wall.
For the best effect install the fireplace out of direct sunlight and away from overhead
lighting.
Tools Required
MEASURING TAPE LEVEL
PHILLIPS SCREWDRIVER ELECTRIC DRILL
STUD FINDER
ƇƇƇƇ
INSTALLATION
PAGE 7 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
The Fireplace can be installed with 2 options:
1. Mount the unit on the wall.....Page 8
2. Freestanding.....Page 12
INSTALLATION - WALL MOUNTING
PAGE 8 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
STEP 1
Before installing your fireplace, determine the desired location.
STEP 2
Remove the glass cover (E) by unscrew four screws as shown.
MIN.
6 In. 15mm
MIN.
6 In. 15mm
MIN.
6 In. 15mm
DD
DD
E
INSTALLATION - WALL MOUNTING
PAGE 9 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
STEP 3
Place the mounting template (H) to the desired location, then mark down the drill hole on the
wall. Make sure the template is level.
DD
295mm~~11.6in
1023.9mm~~40.3in
INSTALLATION - WALL MOUNTING
PAGE 10 OF 22
SKU NO.: 810394426
ITEM NO.: CAL-174203A
STEP 4
Select the hardware appropriate for fireplace installation.
REQUORED HARDWARE IN THIS STEP
NO. DESCRIPTION SKETCH QTY
AA SCREW (4*38MM) 4 PCS
BB WALL ANCHOR 4 PCS
STUD WALL
• Install the screws (AA) at marked stud locations.
DRYWALL
• Drill 5/16-inch holes at marked locations, then insert wall anchors (BB) into holes. Install the
screws (AA) to the wall.
STUD WALL DRYWALL
AA AA
BB
Tabla de contenidos
Otros manuales de Chimenea de interior de Big Lots
