Big Button BB20 Manual de usuario

BB20

Owner’s Manual

Introduction Table of Contents

Congratulations on your purchase of this

Universal Remote Control. Universal Remotes

let you replace a broken or lost remote or

combine more than one remote into one.

We’ve even take this a step further and added

a handy optional Find feature. By purchasing

additional accessories you can easily locate a

lost or misplaced remote, see page 13 for more

details.

We’ve also added Braille to the most

frequently used buttons to make them easier to

ﬁnd for the sight-impaired.

This remote control operates the common

features of most models and brands of

IR Infrared Controlled Video Equipment.

This remote may provide functions that

are not available on your equipment. Some

functions of your particular equipment (e.g.

menu functions) may not be controlled by

this remote. In such cases, use the original

remote control for your equipment. Please

use this manual to become familiar with your

Universal Remote. After you are familiar with

your remote the ﬁrst thing you need to do is to

install batteries and setup your remote for your

particular product and brand.

Thank you for buying this Universal Remote

and we hope it will give you many years of

service.

Introduction............................................................2

Button Functions.................................................... 4

Setup ......................................................................6

Battery Installation............................................ 6

Battery Saver.....................................................6

Code Saver........................................................ 6

Power-On default.............................................. 6

Code Entry .............................................................7

Direct Code Entry ............................................. 7

Code Search ...................................................... 9

Code Identiﬁcation Feature.................................. 10

Programming Combo Device Codes ................... 11

Volume/Mute Control Feature ............................. 11

Setting Volume/Mute Control, Punch-Through ... 11

Setting any Mode to use its own Volume/Mute ...12

Optional Accessories............................................13

Troubleshooting ................................................... 14

Button Functions

11.

10.

1. TV, SAT/CBL Selects product to be operated.

2. GUIDE Displays on-screen program guide.

3. VOLUME UP/DOWN Changes the volume

level of the product, normally the TV.

4. UP, DOWN, LEFT & RIGHT navigation

buttons.

5. OK Selects menu items for the device you are

controlling.

6. MUTE Turns off the TV sound while the

picture remains.

7. NUMBERS Enter numbers for direct channel

selection. Some products require Enter to be

pressed after channel selection.

8. EXIT Used to exit menu functions.

9. CHANNEL UP/DOWN Changes channels.

10. PREV Returns to the previously selected

channel, or DVD repeat toggle.

11. POWER Turns product On or Off.

Button Functions, cont.

Direct Code Entry

Setup

Battery Installation

1. On the back of the remote, push down on

the tab and lift the cover off.

2. Match the batteries to the + and - marks

inside the battery case, then insert 2 AA

Alkaline batteries.

3. Press the battery cover back into place.

Battery Saver

Your remote automatically turns off if the

buttons are depressed more than 30 seconds.

This will save your batteries should your

remote get stuck in a place where the buttons

remain depressed (e.g., between the sofa

cushions).

Code Saver

You will have up to 10 minutes to change the

batteries in your remote without losing codes

you have programmed. However, do not press

any buttons until batteries are installed in the

remote. If buttons are pressed without batteries

in the remote, all codes will be lost.

Power-On Default

The remote powers on in TV mode.

Note when using your remote that you don’t

need to point it directly at the device you want

to control. We’ve included transmit LEDs on

the back of the remote so it works even if you

point it upwards.

To set up your remote to control your TV

1. Press and hold the SETUP button until the

green indicator under a mode button stays

on, then release the SETUP button.

2. Press and release the TV mode button. The

green indicator for TV mode blinks, then

stays lit.

3. Enter the 4 digit TV code from the code

tables (on separate sheet). Note: after a

valid code entry, the green indicator turns

off. For an invalid code, the green indicator

ﬂashes.

4. With your device on, press POWER. If the

device turns off, no further programming

is required. Note: If some buttons do not

operate your equipment, try one of the other

codes for your brand.

Note: Most users will ﬁrst set up the remote

to control their TV. But you also need to set

up the remote to control other devices you

want to control:

To set up your remote to control a Cable

Box

1. Press and hold the SETUP button until the

green indicator under a mode button stays

on, then release the SETUP button.

2. Press and release the SAT/CBL mode

button. The green indicator for SAT/CBL

mode blinks, then stays lit.

3. Enter the 4 digit Cable code from the code

tables (on separate sheet). Note: after a

valid code entry, the green indicator turns

off. For an invalid code, the green indicator

ﬂashes.

4. With your device on, press POWER. If the

device turns off, no further programming

is required. Note: If some buttons do not

operate your equipment, try one of the other

codes for your brand.

To set up your remote to control a Satellite

Receiver

1. Press and hold the SETUP button until the

green indicator under a mode button stays

on, then release the SETUP button.

2. Press and release the SAT/CBL mode

button. The green indicator for SAT/CBL

mode blinks, then stays lit.

3. Enter the 4 digit Satellite code from the

code tables (on separate sheet). Note: after

a valid code entry, the green indicator turns

off. For an invalid code, the green indicator

ﬂashes.

4. With your device on, press POWER. If the

device turns off, no further programming

is required. Note: If some buttons do not

operate your equipment, try one of the other

codes for your brand.

Write your codes down here for easy reference later.

Type Type stored Code

TV TV

SAT/CBL

If your product does not respond after you

have tried all the codes for your brand, or if

your brand is not listed, try searching for your

code by following these steps.

1. Manually turn on the device (TV, Cable

Box, etc.) to be controlled.

2. Press and hold both the MUTE and

POWER buttons at the same time until the

green indicator under a mode button stays

on, then release the buttons.

3. Press and quickly release the desired mode

button (TV or SAT/CBL). The green

indicator for that mode blinks off once.

4. Press the CHANNEL UP button repeatedly

(up to 300 times) until the device to be

controlled changes channel. The green

indicator blinks off with each button press.

If you accidentally overshoot the code

required, press the CHANNEL DOWN

button to backtrack through the library

until the device changes channel. Pressing

CHANNEL UP changes direction to

forward again.

5. Press and release MUTE to install the code.

If the device does not have a CHANNEL UP

button, use POWER instead. Code Search

starts from the currently stored 4 digit number

under that mode.

Note: You can only store TV codes under

the TV button. Most users will store Cable

or Satellite codes under SAT/CBL. You can

however store any type of code under SAT/

CBL. If (for example) you want to store a

CD code under SAT/CBL, ﬁrst follow the

procedure for Direct Code Entry (previous

page) and press SAT/CBL in step 2 of Direct

Code Entry, then enter ANY CD code in step

3 of Direct Code Entry. Then follow the steps

above for Code Search.

Code Search Direct Code Entry, cont.

10 11

Code Identi cation Feature

The Code Identiﬁcation Feature allows you to

identify the 4 digit library code stored under

your device key. For example, if you want to

ﬁnd out what 4 digit code is stored under your

TV device key, follow the six steps below:

1. Press and hold both the MUTE and

POWER buttons at the same time until the

green indicator under a mode button stays

on, then release the buttons.

2. Press and release the desired mode button

(TV or SAT/CBL). The green indicator for

that mode blinks, then stays lit.

3. Press and hold both the MUTE and

POWER buttons at the same time for 1

second, then release the buttons. The green

indicator blinks off.

4. To ﬁnd the ﬁrst digit for the code stored

under the mode key pressed in step 2, press

each numeric key from 0-9 in turn. When

the green indicator blinks off the number

you pressed is the ﬁrst digit for the code

you are searching for.

5. To ﬁnd the second digit, repeat step 4, this

time when the green indicator blinks off this

is the second digit.

6. Repeat step 4 to ﬁnd the third and fourth

digits.

Programming Combo Device Codes

Some Combo devices (e.g. TV/VCR, TV/DVD,

DVD/VCR, etc.) will require you to set up two

different Mode buttons to control both parts of the

Combo device. For example, if you have a TV/

DVD Combo, you might need to set up one code

under the TV button to control the TV part AND

a separate code (under any other Mode button) to

control the DVD part.

Volume/Mute Control and Punch-Through

Feature

This remote lets you select which device Mode

controls your Volume/Mute buttons.

Any Mode chosen for Volume/Mute control

MUST have its own Volume/Mute function or

the Volume/Mute buttons will do nothing.

Setting ALL Volume/Mute Control to any one

Mode

This routine can set all Modes to “punch-through”

to any one chosen Mode for Volume/Mute button

control without the needing to change to that

Mode.

1. Press and hold both the MUTE and POWER

buttons at the same time until the green

indicator under a mode button stays on, then

release the buttons.

2. Press and hold the MUTE button until the

green indicator blinks off, then release the

button.

3. Press and release the desired Mode button (TV

or SAT/CBL) for Volume/Mute control, the

green indicator for that mode blinks then stays

on.

Setup, cont.

12 13

4. Press and release the MUTE button and the

green indicator turns off. The green indicator

will blink rapidly for three seconds if the Mode

you have selected has no Volume/Mute control.

5. All other Modes will now punch-through to

your chosen Mode for Volume/Mute control.

6. All “Visual” and “Audio” programmed Modes

will now punch-through to the respective

Modes you have chosen for Volume/Mute

control.

Setting any Mode to use its own Volume/Mute

Control

This routine can set any Mode to use only its own

Volume/Mute control. Note - If your chosen Mode

has no Volume/Mute functions of its own then the

Volume/Mute buttons will do nothing.

1. Press and hold both the MUTE and POWER

buttons at the same time until the green

indicator under a mode button stays on, then

release the buttons.

2. Press and hold the MUTE button until the

green indicator blinks off, then release the

button.

3. Press and release the desired Mode button (TV

or SAT/CBL), the green indicator for that mode

blinks then stays on.

4. Press and release the VOLUME- (Down)

button, the green indicator blinks then stays on.

5. Press and release the MUTE button and the

green indicator turns off.

6. All “Visual” and “Audio” programmed Modes

will now punch-through to the respective

Modes you have chosen for Volume/Mute

control.

Setup, cont. Optional Accessories

Your new remote has a “Find Feature” build

in. If you purchase either of the accessories

below you can press a button to locate your

remote if you misplace it. When your press the

button the remote emits a loud tone to let you

know where it is.

The optional keyfob can be kept

on your key chain with your keys

and lets you easily locate your

lost remote with the push of a

button. Two coin cell batteries are

included. To replace them, pry

the Keyfob open and replace with

two CR2016 Lithium coin cells.

The optional stand is a handy place to store

your remote, and if you misplace the remote

the button on the stand lets you easily locate it.

The stand requires two AAA batteries, not

included.

14 15

Troubleshooting

Remote does not operate your product.

• Press the mode button of the product you want

to control.

• Program the remote with a new code.

• Install new batteries. (You might have to

reprogram your remote after installing new

batteries.)

• Remote may not be compatible with your

product.

Remote does not operate some features of your

product.

• Program remote with a new code.

• Remote may not be able to operate all features

of your product or button names might be

different than your product.

Green Indicator blinks after you program a

product code.

• Remote did not accept the code.

• Try to program the code again or try a different

code.

For help with setup, please call: 201-661-9944.

The manufacturer warrants that this product shall

be free from defects in material, workmanship

and assembly, under normal use, in accordance

with the speciﬁcations and warnings, for 120 days

from the date of purchase. This warranty extends

only to the original purchaser of the product,

and is nontransferable. Defective products,

together with the dated proof of purchase, must

be returned to the place of purchase for repair or

replacement. THERE ARE NO OTHER EXPRESS

WARRANTIES. Incidental and consequential

damages are disclaimed where permitted by law.

This warranty gives you speciﬁc legal rights, and

you may also have other rights which vary from

state to state.

Limited Warranty

BB20-7/11

Made in China.

Tabla de contenidos

Otros manuales de Control remoto universal de Big Button

Big Button

Big Button BW-1220-US Manual de usuario

Manuales populares de Control remoto universal de otras marcas

Pronto

Pronto Peel Manual de usuario

GE 24929 Manual de usuario

Radio Shack

Radio Shack Wireless Remote Control System Manual de usuario

AUVIO

AUVIO Universal Home Theater Remote Manual de usuario

Philips

Philips Icon SRU4106 Manual de usuario

THOMSON

THOMSON ROC4309 Manual de usuario

Philips

Philips pm625S Manual de usuario

GE RM94931 Manual de usuario

RCA

RCA RCU600WMS - Universal Remote Control Manual de usuario

Blackweb

Blackweb BWB17AV002 Manual de usuario

Marmitek

Marmitek DoorGuard 300 Manual de usuario

Chunghop

Chunghop RM-L618 Manual de usuario

GE RM24965 Manual de usuario

Anderic

Anderic KTN828 Manual de usuario

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Manual de usuario

Medion

Medion E74023 Manual de usuario

intensity

intensity RM02A Manual de usuario

GE RM24950 Manual de usuario