1. Installationofthewall hanger
a) Trace averticallineonthewalltoindicatethecenterof thecookerplate,
b) Holdahoodhangerprofile[B]tothewall (Fig.3,and3),setit symmetricallyin
relationtothecentral line,withthedistance betweentheholesintheprofileand
thecookerplateamountingtomin.970 mm,leveltheprofilepreliminarily,
indicatethespacingof mountingholesonthewall,
c) Drill theholesasindicatedonthewall,usingdrillsof diametercorresponding to
theattachedexpansionplugs,drivetheplugsinand thenscrewthehangerprofile
tothewall,
2. Installationofthehood
a) Hangthehoodbodyontheinstalledhanger[B],levelit withadjusting screws[J]
andthentightenthescrew[I] preventingthehoodfromslidingoffthehanger,
b) Ifrequired,installtheappropriateconduitfordischargeof airtoaventilationduct,
c) Attachthetelescopingcolumnof themasking cover[C and D]onthemounted
hood(Fig.1)
d) Extendthetopmaskingcover[D](Fig.4) totherequiredheight,indicateitsmax.
reachonthecenterline, removethecover,
e) Holdthehangerof thetopmaskingcover[E]at thecenterline,atadistance of 63
mm fromtheindicatedpointof max.reach(Fig. 4),indicatethemounting holeson
thewall andinstallthehangerasdescribedunderd).using thesamemounting
screws,
f) Installthemaskingcovercolumnagainand,using apprpriatescrews,fixit tothe
bottommaskingcoverandthetophangerprofile,
g) Connectthehoodtothepowersupplynetwork.
