intervention, repair or modification means any intervention, repair or modification that was carried
out in violation of the training and documentation provided or was carried out by a person other
than the seller or a person authorised or approved by that person.
The rights of liability for defects from the warranty provided must be exercised by the seller without
undue delay after the buyer discovers the defect, but no later than by the end of the warranty period,
otherwise these rights expire.
It is necessary to submit a tax document to exercise the rights of liability for defects from the
provided guarantee. Otherwise, these rights cannot be granted to the buyer.
The seller's liability for defects covered by the warranty does not arise if these defects were caused
by external events. External events are understood, in particular, a natural disaster, force majeure or
conduct of third parties.
N.KO spol. s r.o. (the manufacturer) considers the guarantee to be voided in the case of:
– inappropriate use of the product;
– use in contravention of national or international standards;
– incorrect installation;
– defective electrical power supply;
– serious maintenance deficiencies;
– unauthorised modifications or interventions;
– the use of non-original or incorrect spare parts and accessories for the model concerned;
– full or partial non-compliance with the instructions;
– exceptional events, natural disasters, or other.
2. SAFETY
2.1 Safety recommendations
Caution:
Familiarise yourself with the following instructions to prevent personal injury and/or
property damage.
• Never try to work with the product until you have thoroughly familiarised yourself with the
way it works. If you still have doubts after having carefully and fully read this manual,
please contact your supplier.
• Make sure that all technical personnel who are to use and maintain the product are fully
familiar with all relevant safety recommendations.
• The product must only be installed by authorised personnel in accordance with the
instructions in this manual.
• Before the work begins, the operator must be satisfied that all safety devices are functional
and that all safety guards are fitted.
• Never use it for purposes other than that mentioned in the manual. Never process materials
and workpieces other than those mentioned.
