Betso Sharkie Manual de usuario

User manual

BETSO SHARKIE

Active antenna with extremely low noise and easy gain adjustment

1© Copyright BETSO ELECTRONICS Ltd.

User manual

BETSO SHARKIE

Contents

1. Product description................................................................................................3

2. Top features.......................................................................................................... 3

3. Control elements.................................................................................................... 4

4. Power supply......................................................................................................... 4

5. Turning on............................................................................................................5

6. Setting of antenna gain in the range 9 to +18 dB...................................................5

7. Setting of right gain value to get the best performance.............................................5

8. Display settings...................................................................................................... 6

9. Recommended accessories......................................................................................6

10. Troubleshooting...................................................................................................7

11. Safety instructions................................................................................................7

12. Technical specifications.........................................................................................7

13. Schematic of connector........................................................................................8

14. Table of common coaxial cables attenuation...........................................................8

15. EC Declaration of conformity................................................................................9

Used symbols

Indicates text that has only in ormative character. I you overlook this

in ormation, it can't result in product damage by it's mishandling.

Indicates text that has important instruction character. I you overlook this

in ormation, it may result in product damage not covered by warranty.

User manual

BETSO SHARKIE

Thank you that you have purchased the product BETSO!

Please pay su icient attention to the ollowing user manual o your new product

BETSO. Following these instructions, you will avoid the possible damages o your new

device and at the same time, they will be presented to you all the available eatures that

allow you to take advantage o the potential o the product.

For the latest in ormations about our products BETSO please contact your local

distributor or visit our website http://www.betso.eu.

1. Product description

The SHARKIE is our new compact, wideband UHF, active receiver antenna with

Log Periodic Dipole Array (LPDA) structure and cardioid directivity. It's extremely low

noise ampli ier with easy gain setting is ideal or variable coaxial cable length attenuation

compensation in the ield. Rock solid mechanical construction guarantees careless

unctionality both in indoor and outdoor locations.

. Top features

•Frequency range 470 MHz to 850 MHz

•Antenna structure average gain 8 dB (9dB peak)

•Ultra low noise onboard ampli ier with gain rom -9 dB to +18 dB

•Excellent RF parameters:

◦0.75 dB ampli ier IC NF

◦> 34 dBm IP3 point

◦< 1.2 V.S.W.R.

•High e icient input ilters or removing unwanted RF spectrum

•Plug and work, surprisingly easy to setup and put to work low

•Top build quality

•Easy gain setting with automatic last set gain storing

•Brightness o LED display can be automatically adjusted according to ambient light

•Brightness o LED display can be also set manually to requested level

•Display can be completely turned o with ability to show preset gain value upon

button request

3© Copyright BETSO ELECTRONICS Ltd.

User manual

BETSO SHARKIE

3. Control elements

4. Power supply

External power supply 5-20V DC has to be applied using coaxial cable connected to

the input BNC connector, which schematic is shown below.

Warning: Never insert power supply with voltage exceeding operating range o 5-

20V DC! Violation o this operating condition can lead to losing warranty and

destroying the device!

1. Display

. Ambient light sensor

3. Button “UP”

4. Button „DOWN“

5. BNC output/powering

connector

6. 1/4“ mounting thread

7. 3/8“ mounting thread

1. GND

. 5-20V DC/Antenna signal

User manual

BETSO SHARKIE

5. Turning on

turning on antenna will turn on automatically upon power insertion

through coaxial cable

turning off to turn o antenna, simply remove coaxial cable or turn o DC

powering component on power source

Warning: Never insert power supply with voltage exceeding operating range o 5-

20V DC! Violation o this operating condition can lead to losing warranty and

destroying the device!

6. Setting of antenna gain in the range -9 to +18 dB

Antenna gain can be set in the range o -9 to +18 dB.

enter settings long (2 seconds) press o UP or DOWN buttons

change settings short press o UP or DOWN button

save settings i no button is pressed during 3 seconds, gain value stops to

lash and actual value is stored in memory

When the antenna is turned on, it will automatically recall last saved gain

settings.

7. Setting of right gain value to get the best performance

To get the best RF per ormance o your wireless system, setting of right value of

antenna gain is important. Allways start with setting the gain, which covers losses o

your coaxial cable. Losses o common types o coaxial cables are in the table on page 8.

I signal indicator on your receiver indicates very weak signal even i you set the

gain which covers coaxial cable losses, you can try to add more gain and get

better per ormance. For example in places with low RF noise this gain can add

multiple working distance o your wireless system.

5© Copyright BETSO ELECTRONICS Ltd.

User manual

BETSO SHARKIE

I signal indicator on your receiver indicates very strong signal and you still have

dropouts in audio, there is possibility your receiver is overloaded. It can cause high

power o wireless transmitter and short distance between transmitter and receiving

antennas. In this case decreasing o antenna gain (even to negative gain) can help

to get much better per ormance o your wireless system.

8. Display settings

Variable display settings are available or possibility to adjust behavior o antenna

display to actual ambient light conditions or speci ic requirements o shooting place.

enter the settings long (2 seconds) press o UP and DOWN buttons at once

change setting short press o UP or DOWN button

save setting i no button is pressed during 3 seconds, display settings stops

to lash and actual value is stored in memory

Available display settings are listed bellow:

b.A automatic display brightness according to ambient light

b.0 display is turned o until one o buttons is pressed, then display

will temporarily turn on or the period o 3 seconds with

automatic brightness settings

b.1 - b.5 manual brightness level set to one o 5 levels (1 is lowest)

When the antenna is turned on, it will automatically recalled lastly saved display

settings.

9. Recommended accessories

Optional accessories include various cables or the connection o the antenna

output signal and input power supply and special threaded variable angle antenna

mounting adaptor.

For the latest in ormations about our products BETSO please contact your local

distributor or visit our website http://www.betso.eu.

User manual

BETSO SHARKIE

10. Troubleshooting

Lastly set gain or display settings is not recalled upon turning on

Please make sure, that you disconnect the coaxial cable with power supply a ter

inished storing o preset gain value or display settings, which is indicated by stopped

display blinking.

11. Safety instructions

Never open the electrical device! All reparations must be per ormed by an

authorized service center. In the case o opening o the device away rom the

authorized service center, you will automatically loose the warranty o the device.

To clean the device, use a dampened piece o cloth. Never use any chemical

solvents!

1 . Technical specifications

Frequency range 470 MHz to 870 MHz

Input ilters attenuation High below 450 MHz ( or example -82dB @ 100 MHz)

High above 870 MHz ( or example -35dB @ 2.4 GHz)

Antenna gain 8 dB o average gain (peak 9 dB)

Antenna directivity Cardioid

Antenna polarization Linear

Ampli ier gain -9 dB to +18dB

Ampli ier noise Ultra low noise < 0.75 dB

Antenna VSWR Excellent < 1.2 (max. 0.8% o received signal power is

re lected)

Ampli ier IP3 Very high > 34 dBm

Display Bright blue LED with automatic or manual brightness

settings and stand-by mode

Powering External powering 5 - 20 V DC

Current consumption 35 mA *

7© Copyright BETSO ELECTRONICS Ltd.

User manual

BETSO SHARKIE

Mechanical construction CNC milled, anodized aluminium alloy and glass-

rein orced epoxy laminate

Mounting 1/4" and 3/8" threads

Dimensions (h x w x d) 275 x 350 x 21 mm (10.83" x 13.78" x 0.82")

Weight approx. 320 g (0.7 lb.)

* depends on the operating mode o the LED display

13. Schematic of connector

1. GND

. 5-20V DC/Antenna signal

14. Table of common coaxial cables attenuation

Coaxial cable attenuation

Relevant gain setting o SHARKIE ampli ier

@ 470 MHz @ 650 MHz @ 850 MHz @ 470 MHz @ 650 MHz @ 850 MHz

Cable length RG58C/U RG58C/U RG58C/U RG 13/H155 RG 13/H155 RG 13/H155

1 m / 3.3 t. 0.32 dB 1 dB 0.4 dB 1 dB 0.5 dB 1 dB 0.2 dB 0 dB 0.25 dB 1 dB 0.3 dB 1 dB

3 m / 10 t. 1 dB 1 dB 1.2 dB 1 dB 1 dB 1 dB 0.6 dB 1 dB 0.75 dB 1 dB 0.9 dB 1 dB

5 m / 16.5 t. 1.5 dB 2 dB 2 dB 2 dB 2.5 dB 3 dB 1 dB 1 dB 1.25 dB 2 dB 1.5 dB 2 dB

10 m / 33 t. 3 dB 3 dB 4 dB 4 dB 5 dB 5 dB 2 dB 2 dB 2.5 dB 3 dB 3 dB 3 dB

15 m / 50 t. 5 dB 5 dB 6 dB 6 dB 7.5 dB 8 dB 3 dB 3 dB 3.75 dB 4 dB 4.5 dB 5 dB

20 m / 65 t. 6 dB 6 dB 8 dB 8 dB 10 dB 10 dB 4 dB 4 dB 5 dB 5 dB 6 dB 6 dB

25 m / 82 t. 8 dB 8 dB 10 dB 10 dB 12.5 dB 13 dB 5 dB 5 dB 6.25 dB 7 dB 7.5 dB 8 dB

30 m / 100 t. 10 dB 10 dB 12 dB 12 dB 15 dB 15 dB 6 dB 6 dB 7.5 dB 8 dB 9 dB 9 dB

40 m / 130 t. 13 dB 13 dB 16 dB 16 dB 20 dB 18 dB 8 dB 8 dB 10 dB 10 dB 12 dB 12 dB

50 m / 165 t. 16 dB 16 dB 20 dB 18 dB 25 dB 18 dB 10 dB 10 dB 12.5 dB 13 dB 15 dB 15 dB

User manual

BETSO SHARKIE

15. EC Declaration of conformity

BETSO ELECTRONICS s.r.o.

Elisky Premyslovny 1335, 156 00 Praha 5 - Zbraslav, Czech Republic

Reg. Number: 28955706

declares that this device

BETSO SHARKIE

speci ication: Active antenna with extremely low noise and easy gain adjustment

requency range: 470 – 850 MHz

con orm to the essential requirements o the R&TTE Directive 1999/5/EC. To demonstrate

compliance with these requirements, the ollowing standards were consulted:

EN 300 0 (Radio spectrum Matters ERM)

EN 301 489 (Electromagnetic Compatibility)

EN 60065/ 00 (Safety of Electrical Equipment)

Con ormity assessed via Annex III. using a Technical Construction and Results o measurements.

October 2014

Ing. Jan Zastera

general manager

E-mail: [email protected]

Otros manuales de Antena de Betso

Betso

Betso BOWTIE Manual de usuario

Manuales populares de Antena de otras marcas

Alfa Network

Alfa Network APA-L01 Manual de usuario

Naval

Naval PR-422CA Manual de usuario

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manual de usuario

TERK Technologies

TERK Technologies TV44 Manual de usuario

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manual de usuario

HP J8999A Manual de usuario

MobilSat

MobilSat MSP-S Manual de usuario

Steren

Steren ANT-UHF 13 Manual de usuario

Novatel

Novatel 600-G Manual de operación

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manual de usuario

TRENDnet

TRENDnet TEW-AO12O Manual de usuario

Radio Shack

Radio Shack 15-1837 Manual de usuario

CommScope

CommScope CMAX-OMFX-43M-I53 Manual de usuario

Ramsey Electronics

Ramsey Electronics DAP25 Manual de usuario

COBHAM

COBHAM SAILOR 800 VSAT Manual de uso y cuidado

Trango Systems

Trango Systems AD900-9 Manual de usuario

Steren

Steren ANT-100 Manual de usuario

Proxim

Proxim 5054-PA-23 Manual de usuario