BETCO Big Bertha Manual de usuario

Big Bertha Propane Stripping Machine

Operators Manual

Parts Schematic

Item #E12327-00

- 2 -

TABLE OF CONTENTS

PAGE DESCRIPTION

3 Table of Contents

4, 5 Safety Instructions – Very Important – Must Read Both Pages

6 Specifications of the Extreme Vac

7 Features of the Extreme Vac

8 Battery Installation and Charging

9 Battery Maintenance

10 Vacuum Controls

11 Operating Procedures

12 Preventative Maintenance and Operating Tips

13 Squeegee Information and Adjustments

14 View - Rear View of Parts

15 View - Bottom View of Parts

16 View – Inside View of Parts

17 Parts List for the Previous Views

18 Squeegee Lift and Recovery Lid Flap Details

19 Batteries and Charger parts

20,21 Recovery Lid Assembly and Parts

22 Recovery Tank Assembly and Parts

23 Squeegee Mount Assembly and Parts

24,25 Squeegee Assembly and Parts for 34” Squeegee

26,27 Squeegee Assembly and Parts for 41” Squeegee

28 Electrical Components – Diagram of Parts and Connections

29 Vacuum Mount with Vacuum motor and other Electrical Parts

30 Electrical Schematic

31 Trouble Shooting

32 Extreme Vac Limited Warranty

- 3 -

INTRODUCTION

Thank you for taking the time

to select the best

propane powered floor equipment

being manufactured today.

With the Extreme Strip, we offer the

“Best Built – Best Backed”

propane powered floor stripping

machine available.

- 4 -

WARNING

LETHAL EXHAUST GAS

NEVER RUN THE ENGINE

IN A CLOSED BUILDING

OR CONFINED AREA

Exhaust gases contain poisonous carbon

monoxide. Carbon monoxide is odorless,

colorless, and can cause death if inhaled.

- 5 -

SAFETY

General Safety Information

Keep hands, feet, strings and ties away from all moving

parts while the machine is in operation. The exhaust system

gets very hot so keep hands, clothing and any items that can

burn away from the engine, engine manifold, and muffler

while hot.

PowerBuff machines are built tough and durable,

however do not abuse the machine and the machine won’t

abuse you. With proper care and maintenance this unit will

give you trouble free operations for the years to come.

Warning: Lethal Exhaust Gases

Engine exhaust gases contain poisonous carbon

monoxide. Carbon monoxide is odorless, colorless,

tasteless, and can cause death if inhaled. Avoid

inhaling exhaust fumes and never run the engine in a

closed building or confined area without proper

ventilation.

Although LPG burns more efficiently and emits

less carbon monoxide than gasoline, some carbon

monoxide is produced. Avoid inhaling exhaust gases -

especially over prolonged periods of time. Do not

allow engine to run unattended.

- 6 -

CARBON MONOXIDE DETECTOR

The “CO” carbon monoxide detector detects carbon monoxide before

it reaches dangerous levels. This detector is a must for those who run

propane powered equipment in or around enclosed areas.

• The CO Detector is for everyone’s protection against Carbon

Monoxide Poisoning.

• Effective for 30 days after package has been opened

• Mount with self-adhesive strip on the side of machine handle or

locate it near the operator’s collar.

• If the orange disk on the detector changes to gray or black -

your Carbon Monoxide Levels are at a Dangerous Level. See

(1) & (2)

(1) If the orange disk changes to gray or black you must turn

your buffer off immediately and return it to your nearest

authorized PowerBuff Inc. distributor for an emissions test.

(2) Do Not Restart the machine until the emissions have been

checked and corrected.

This is for your protection as well as your customers. CO detectors

are a must for safe operation and maximum efficiency of your

equipment.

For replacement CO detectors, contact your PowerBuff Inc.

distributor. Ask for the carbon monoxide detector or part P1125.

- 7 -

Tank Storage and Maintenance

We at PowerBuff Inc., use the Worthington gas

cylinders designed for vapor withdraw. The fuel lockoffs,

regulators, and engines are also designed for vapor

withdrawal. “Fuel freeze-ups” or “frozen regulators” are a

result of liquid propane being introduced into the system. To

prevent these “freeze-ups” from occurring follow this

important procedure:

(1) Do not overfill - the best gauge is a scale - never

allow tank to weigh over 36 pounds for an

aluminum tank and 43 pounds for a steel tank.

(2) Store tanks outside in a well-ventilated area.

(3) Store tanks in the upright position (valves up).

- 8 -

INSTRUCTIONS

BEFORE STARTING THE MACHINE

Before any operation should begin, you first should read your Engine Operation

Manual and your Owner’s Manual.

Your machine is shipped ready for your operation, however there is no fuel in the

tank. When having the tank filled, you must make sure the tank is never over

filled.

The best way to do this is to tell the filling station to weigh the tank full. On an

aluminum tank, it should weigh no more than 36 pounds and on a steel tank no

more than 43 pounds.

Adjustable Handle: Adjust the handle for comfortable operation. Use two 3/4”

wrenches and loosen handle. Adjust to comfortable height and re-tighten bolts to

40-50 ft/lbs.

• Check Oil Level: Starting the engine without the proper amount of oil will

cause severe engine damage. Always keep the engine oil level between the

full and add marks on the dipstick. Do not loosen oil fill cap or remove dipstick

while engine is running.

o Park your PB 17-V-Twin on a level surface.

o Turn the oil fill cap counter clockwise and then lift from the fill tube.

o Wipe the dip stick clean and push it back into the oil fill tube until the cap

seats and then withdraw it to check: the oil level. (Do not screw cap on to

check oil). Add if necessary. If the oil level is low, add API Class SG or SH

oil having a SAE viscosity grade appropriate for the expected

temperatures as indicated in the Operators Manual.

o Important Note: DO NOT OVERFILL

o Replace oil cap.

• Inspect fuel hoses and fittings for leaks. Repair leaks immediately.

• Look and listen for exhaust leaks. Have all leaks repaired before operating.

• Check the carburetor filter and air filter for debris. Clean and replace if

necessary.

• Connect fuel hose to tank by screwing the hose fitting to tank. You must

tighten all the way down to make fuel connection. Turn tank knob slowly until

you hear the flow of fuel into fuel system.

- 9 -

INSTRUCTIONS

STARTING THE ENGINE

The PB 17-V-Twin is equipped with a 12 volt starter and a key switch

start.

(1) Start the Extreme Strip machine with the brushes in the running

position, flat on the floor.

(2) Open propane tank valve (turn counterclockwise).

(3) Put throttle cable into the “slow” position.

Note: If starting is difficult, you can place throttle in the “fast”

position, and after the engine starts, back off to the slow

position before the centrifugal clutch engages.

(4) Turn the ignition - start switch to the “start” position and hold it

there until the engine starts. Do not crank for more than 20

seconds at a time and wait at least one minute between tries

when cranking. See troubleshooting guide if the engine does not

start after several tries.

(5) After engine starts, set throttle so that the centrifugal clutch will

not engage until the engine has warmed up. Do not operate

machine until the engine has warmed up sufficiently. ( 3 to 5

minutes )

STOPPING THE ENGINE * * *

1. Turn propane tank valve to the closed position (turn clockwise)

and allow the engine to continue running until it runs out of fuel.

This can be done with the centrifugal engaged or not engaged.

* * *

2. Turn key to the off position.

***In an emergency, immediately turn

the key to the off position.

Backfiring may occur when using this method.

-10 -

Tabla de contenidos

Otros manuales de Máquina de piso de BETCO

BETCO

BETCO CREWMAN Manual del producto

BETCO

BETCO Stealth ASD26BT Manual del producto

BETCO

BETCO Lil Bertha XSM 24 Manual de usuario

BETCO

BETCO FOREMAN 17DS Manual del producto

BETCO

BETCO Fiber PRO 8 BFP8 10080210 Manual de usuario

BETCO

BETCO Foreman 1600 Manual de usuario

BETCO

BETCO PREDATOR SERIESE Manual del producto

BETCO

BETCO E29926-00 Manual de usuario

BETCO

BETCO BIG BERTHA XSM 30 Manual del producto

BETCO

BETCO FOREMAN 20DS Manual de usuario

BETCO

BETCO STEALTH DRS21BT MicroRider Manual de usuario

BETCO

BETCO br1500 Manual de usuario

BETCO

BETCO XT3 Manual de usuario

BETCO

BETCO STEALTH DRS21BT MicroRider Manual de usuario

BETCO

BETCO FiberPRO 15C Manual del producto

BETCO

BETCO FOREMAN AS32HD Manual de usuario

BETCO

BETCO E12327-00 BIG BERTHA XSM30 Manual del producto

BETCO

BETCO Optima QT E12317-00 Manual de usuario

BETCO

BETCO crewman dc2000 E83018-00 Manual de usuario

BETCO

BETCO Crewman E83013-00 Manual de usuario

BETCO

BETCO MOTOMOP Manual del producto

BETCO

BETCO xt3-27 Manual de usuario

BETCO

BETCO CRETE Rx CP30 Manual del producto

BETCO

BETCO BPS28 Manual de usuario

Manuales populares de Máquina de piso de otras marcas

Nilfisk-Advance

Nilfisk-Advance Advance SC370 17B Manual de usuario

Numatic

Numatic ET 4045 Manual de usuario

HAWK ENTERPRISES

HAWK ENTERPRISES HP1513-180BRUTE Manual de usuario

Mytee

Mytee 8070 Mytee-Lite Manual de usuario

Kärcher

Kärcher B 140 R Manual de usuario

Triple S

Triple S Ace 26T1 Manual de usuario

Nilfisk-Advance

Nilfisk-Advance SW 750 Manual de usuario

Tornado

Tornado Marathon 2000 98190 Manual

Windsor

Windsor ADMIRAL Admiral 8 Manual de usuario

Numatic

Numatic TTB 1117/100 Manual de usuario

Tennant

Tennant 8210D Manual de usuario

Nobles

Nobles Frontier Manual del producto

lavina

lavina 21-X Manual de usuario

KENT

KENT Edge 28B Manual de usuario

Tennant

Tennant 215 Manual del producto

Windsor

Windsor BDP 51/2000C Manual de usuario

CleanFreak

CleanFreak DURA-18HD Manual de usuario

Nilfisk-Advance

Nilfisk-Advance Warrior 34RST Guía del administrador