www.bestwater.de 4
Dear customer,
Thank you for deciding to own our BWE 2000 water softening appliance with an RX control system.
The functioning of this appliance is based on modern ceramic rotating plate technology and is
resistant against deposition of impurities in the water.
The water softener appliance with the RX control system is a good choice to produce recycled water
of the highest quality. Please read this instruction manual before operating this appliance in order to
avoid damages which could develop through misuse. Particular consideration should be made to the
Safety Instructions.
1. IMPORTANT TERMS OF USE
• The improper use of this appliance can lead to permanent damage to the operation or lead
to malfunction.
• The water purification system shall be used for its intended purpose. Any disregard of the
appliance’s operating instructions will negate the guarantee.
• Do not interfere with the design of the softener appliance. Changes to the design will void
the warranty.
• The improper use of the softener appliance can lead to damage to your health or even your
life.
• Do not touch or handle the electric plug or power cord with wet hands.
• If you detect any damage to the power cord or plug, contact an authorized service centre for
this type of repair immediately.
• Do not use a damaged appliance. Once you have detected an error, please contact an
Authorized Service Centre.
• It is important that the water treatment system is in a safe place. Avoid contact of water with
all electrical components of the water softener.
• Do not clean the softener from the outside with running water.
• Any repairs may only be carried out by trained specialist personnel.
• Protect the appliance against contact with sharp tools and strong impact, do not expose it to
high temperatures or fire.
• Secure the location where the device is connected to the power supply.
• The softener should be checked regularly during its operation.
• For proper operation of the system, regular refilling of salt into the brine tank is required;
Failure to do so may cause the appliance to malfunction or become damaged.
• Disconnect the device from the power supply when it is to be cleaned or moved. Remember,
if the appliance plug is not disconnected, the appliance is live.
• Careless handling of the device while it is connected to the power supply can cause severe
paralysis or death.
• Turn off the device before disconnecting it from the power supply.
• The electrical installation to which the device is to be connected must comply with national
standards.
• For safety reasons, children and unauthorized persons should not be near the water
treatment system.
