Bestgreen LM-C3210 Manual de usuario

Original instructions

ELECTRICAL LAWN MOWER

LM-C3210

WARNING: Read thoroughly the instruction handbook before

using this machine.

DESCRIPTION OF THE SYMBOLS

Symbols are used in this manual to attract your

attention to possible risks. The safety symbols and

the explications which accompany them must be

perfectly understood. The warning themselves do not

prevent the risks and can not be a substitute for

proper methods of avoiding accidents.

This symbol, before a safety comment, indicates a

precaution, a warning or a danger. Ignoring this

warning can lead to an accident for yourself or for

others. To limit the risk of injury, fire, or electrocution

always apply the recommendations indicated.

WARNING: Read operator’s manual.

Before any use, refer to the corresponding paragraph

in the present manual.

In accordance with European regulations applicable

to this product.

Class II symbol: this appliance is designed with

double insulation. It is not necessary to connect it to

earth connection.

Degree of protection against water: IPX4.

These symbols indicates the requirement of wearing

eye protection, ear protection and gloves when using

the product.

Wear safety boots.

Disconnect the mains plug if the cord becomes

damaged or entangled.

Do not expose to rain.

Danger of injury from flying parts! Always maintain a

sufficiently safe distance. Beware of thrown objects.

Keep bystanders away.

Beware of sharp blades. Blades continue to rotate

after the motor is switched off - Remove plug from

mains before maintenance or if cord is damaged.

Keep the supply flexible cord away from the cutting

blades.

The crossed-out wheeled bin symbol indicates that

the item should be disposed of separately from

household waste. The item should be handed in for

recycling in accordance with local environmental

regulations for waste disposal. By separating a

marked item from household waste, you will help

reduce the volume of waste sent to incinerators or

land-fill and minimize any potential negative impact on

human health and the environment.

GENERAL SAFETY WARNINGS

IMPORTANT

READ CAREFULLY BEFORE USE.

KEEP FOR FUTURE REFERENCE.

If the supply cord is damaged, it must be replaced

by the manufacturer, its service agent or similarly

qualified persons in order to avoid a hazard.

Children should be supervised to ensure that they

do not play with the appliance.

Safe operating practices for electrically powered

lawnmowers

1.Training

a. Read the instructions carefully. Be familiar with the

controls and the correct use of the machine.

b. Never allow children or people unfamiliar with

these instructions to use the machine. Local

regulations can restrict the age of the operator.

c.Never operate the machine while people, especially

children, or pets are nearby.

d. Keep in mind that the operator or user is

responsible for accidents or hazards occurring to

other people or their property.

2.Preparation

a. While operating the machine always wear

substantial footwear and long trousers. Do not

operate the machine when barefoot or wearing

open sandals. Avoid wearing clothing that is loose

fitting or that has hanging cords or ties.

b. Thoroughly inspect the area where the machine is

to be used and remove all objects which can be

thrown by the machine.

c.Before using, always visually inspect to see that the

blade, blade bolt and the blade assembly are not

worn or damaged. Replace worn or damaged

components in sets to preserve balance. Replace

damaged or unreadable labels.

d. Before use check the supply and extension cord

for signs of damage or aging. If the cord becomes

damaged during use, disconnect the cord from the

supply immediately. DO NOT TOUCH THE CORD

BEFORE DISCONNECTING THE SUPPLY. Do not

use the machine if the cord is damaged or worn.

3.Operation

a. Operate the machine only in daylight or in good

artificial light.

b. Avoid operating the machine in wet grass.

c.Always be sure of your footing on slopes.

d. Walk, never run.

e. Mow across the face of slopes, never up and

down.

f. Exercise extreme caution when changing direction

on slopes.

g. Do not mow excessively steep slopes.

h. Use extreme caution when reversing or pulling the

machine towards you.

i. Stop the blade(s) if the machine has to be tilted for

transportation when crossing surfaces other than

grass, and when transporting the machine to and

from the area to be used.

j. Never operate the machine with defective guards

or shields, or without safety devices, for example

deflectors and/or grass collector, in place.

k.Switch on the motor carefully according to

instructions and with feet well away from the

blade(s).

l. Do not tilt the machine when switching on the

motor, except if the machine has to be tilted for

starting. In this case, do not tilt it more than

absolutely necessary and lift only the part, which is

away from the operator.

m.Do not start the machine when standing in front of

the discharge opening.

n. Do not put hands or feet near of under rotating

parts. Keep clear of the discharge opening at all

times.

o. Do not transport the machine while the power

source is running.

p. Stop the machine, and remove plug from the

socket. Make sure that all moving parts have come

to a complete stop.

q. Stop the machine, and remove the disabling

device. Make sure that all moving parts have come

to a complete stop

Whenever you leave the machine,

Before clearing blockages or unclogging chute,

Before checking, cleaning or working on the

machine,

After striking a foreign object. Inspect the machine

for damage and make repairs before restarting

and operating the machine.

If the machine starts to vibrate abnormally (check

immediately)

Inspect for damage,

Replace or repair any damaged parts,

Check for and tighten any loose parts.

4.Maintenance and storage

a. Keep all nuts, bolts and screws tight to be sure the

machine is in safe working condition.

b. Check the grass collector frequently for wear or

deterioration.

c.On machine with multi blade, take care as rotating

one blade can cause other blades to rotate.

d. Be careful during adjustment of the machine to

prevent entrapment of the fingers between moving

blades and fixed parts of the machine.

e. Always allow the machine to cool down before

storing.

f. When servicing the blades be aware that, even

though the power source is switched off, the blades

can still be moved.

g. Replace worn or damaged parts for safety. Use

only genuine replacement parts and accessories.

5.Recommendation for class II machine

a. The machine should be supplied via a residual

current device (RCD) with a tripping current of not

more than 30 mA.

b. For your safety, use only extension cords

approved for outdoor work and protected against

splashing. The extension cable must have

conductors of at least 1,5 mm²for a cable length

less than 25m and 2,5 mm²if the length exceeds

25m. Before use, always unroll the cable reel.

Check the condition of the cable.

c.Do not pull on the cable to unplug. Protect the cable

from heat, oil and sharp edges.

INTENDED USE

The electrical lawn mowers for use in private gardens are mowers whose annual use

does not generally exceed 50 hours and that are primarily used for tending grass or

lawn areas, but not in public facilities, parks or sports grounds and not for agricultural

or forestry use.

TECHNICAL SPECIFICATIONS

Model

LM-C3210

Voltage/Frequency

230 - 240V~, 50Hz

Rated power

1200W

Rated speed

3300min-1

Cutting width

320mm

Height of cut

25-65mm

Net weight (including engine)

11kg

Grass box capacity

30l

Sound pressure level, LpAd

85dB(A) K=3,0dB(A)

Sound power level, LWAd

96dB(A)

Vibrations

<2,5m/s2 K=1, 5m/s2

Noise / Vibration Information

Measured sound values determined according to EN 60335-2-77:2010.

Wear ear protection!

Vibration total values (triax vector sum) determined according to EN 60335-2-77:2010.

The vibration emission level given in this information sheet has been measured in accordance with

a standardised test given in EN 60335-2-77:2010 and may be used to compare one tool with

another.

It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main applications of the tool. However if the

tool is used for different applications, with different accessories or poorly maintained, the vibration

emission may differ. This may significantly increase the exposure level over the total working

period.

An estimation of the level of exposure to vibration should also take into account the times when the

tool is switched off or when it is running but not actually doing the job. This may significantly reduce

the exposure level over the total working period.

Identify additional safety measures to protect the operator from the effects of vibration such as:

maintain the tool and the accessories, keep the hands warm, organization of work patterns.

LIST OF MAIN PART

1 Switch lever

2 Safety Button

3 Cable Hook

4 Upper handle

5 Knob module

6 Lower handle

Tabla de contenidos

Otros manuales de Cortacésped de Bestgreen

Bestgreen

Bestgreen BM6B53BG Manual de usuario

Bestgreen

Bestgreen BM135B92HRBK Manual de usuario

Bestgreen

Bestgreen BM12592RB Manual de usuario

Bestgreen

Bestgreen BM135B107K Manual de usuario

Bestgreen

Bestgreen BM125M92RB Manual de usuario

Bestgreen

Bestgreen BM5B53BG Manual de usuario

Bestgreen

Bestgreen BM115B92RB Manual de usuario

Bestgreen

Bestgreen BM125B92 Manual de usuario

Bestgreen

Bestgreen BM135B92RB Manual de usuario

Bestgreen

Bestgreen BM125M92RB Manual del propietario

Bestgreen

Bestgreen BM125B97 Manual de usuario

Bestgreen

Bestgreen BM18H107RB Manual de usuario

Bestgreen

Bestgreen BM20H107RBK Manual de usuario

Manuales populares de Cortacésped de otras marcas

RHINO

RHINO 1958 Manual de usuario

Wolf Garten

Wolf Garten Compact plus 40 B Manual de usuario

Cub Cadet

Cub Cadet LTX 1045 Manual de usuario

Craftsman

Craftsman 917.378461 Manual de usuario

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manual de usuario

Challenge

Challenge CH18V2 Instrucciones de operación

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manual de usuario

DEWEZE

DEWEZE ATM-725 Manual de operación

Weed Eater

Weed Eater 180083 Manual de usuario

Husqvarna

Husqvarna Poulan Pro PP185A42 Manual de usuario

Better Outdoor Products

Better Outdoor Products Quick Series Manual de usuario

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manual de funcionamiento

MTD

MTD 795, 792, 791, 790 Manual de usuario

Toro

Toro Groundsmaster 3505-D Manual de usuario

Dennis

Dennis FT 610 Manual de usuario

AIRFORCE

AIRFORCE F-15 Gen 3 Manual de usuario

MTD

MTD 126-220-000 Manual de usuario

Toro

Toro 74806 Manual de usuario