Bernina 87 Manual de usuario

Binder attachment # 87 - # 88

Bandeinfasser # 87 - # 88 |Ourleur simple # 87 - # 88

You can find further information

and the Binder attachment video at

www.bernina.com

Binder attachment # 87 | # 88 en | 4

Bandeinfasser # 87 | # 88 de | 10

Ourleur simple # 87 | # 88 fr | 16

Bandapparaat # 87 | # 88 nl | 22

Bordatore # 87 | # 88 it | 28

Ribeteador de cintas # 87 | # 88 es | 34

Bandkantare # 87 | # 88 sv | 40

Kantebåndsapparat # 87 | # 88 da | 46

Båndfeste # 87 | # 88 no | 52

Esisaumattujen nauhojen nauhareunustaja # 87 | # 88 fi | 58

Устройство для окантовки # 87 | # 88 ru | 64

バインダーアタッチメント # 87、又は # 88 jp | 70

Language

1 Binder attachment

1 Black securing screw

1 User instructions

Supplies

Additionally required

1 Presser foot # 95|# 95C

Presser foot for binder attachment

# 87

for folded binding of 13 mm/20 mm/25 mm

width.

# 88

for unfolded binding of 28 mm/32 mm/

38 mm width.

Application

Quick and easy binding of edges with unfolded or pre-folded bias-

binding.

For your safety

›Before using the accessory please read the instruction manual of the

sewing machine and the accessory carefully!

Assembly

›Use securing screw (1) to fit the binder attachment in such way that

the plate sits virtually flush with the stitch plate. This applies for acti-

va, aurora, artista and BERNINA 830 models.

›Butt guiding aid (2) against presser foot. Then tighten the screws

(4, 5).

›Loosen screw (3) on pivot arm and move binder to presser foot as

close as possible from the side, then retighten screw (3) provisionally.

Preparation

›Move screws (6, 7) to front holes (if not placed there already). Set

binder guide parallel with presser foot and,at the same time, binding-

exiting channel flush with the stitch plate. Tighten the two screws.

›Check binder-/presser-foot position. The binder must be set in such

way that the clearance between presser foot and binder guide is just

wide enough for them not to interfere with each other.

›Tighten screw (3).

Sewing machine settings

Presser foot: Presser foot for binder attachment # 95/95C

Stitch: Straight-stitch/zigzag

Stitch width: 0/0-4mm

Stitch length: 2-3mm

Feed-dog: Sewing position

Mode of operation

›Insert folded bias-binding into binder, pushing it through the opening

with a pointed but soft item (e.g. a toothpick) if required.

›Place fabric edge under presser foot, positioning it into the binding so

that binding wraps around edge nicely. Set needle position to allow

for edge-stitching of the binding.

›Baste or neaten quilted or multi-layered fabrics before binding.

Variant

›Use zigzag stitch to attach the binding. Set needle position so that

one swing of the needle catches the binding and the other the fabric.

Tipp

Use a wider needle distance in curves. Reset needle posi-

tion accordingly.

1 Bandeinfasser

1 Befestigungsschraube schwarz

1 Bedienungsanleitung

Lieferumfang

Zusatzmaterial

1 Nähfuss # 95

# 95C

Bandeinfasserfuss

# 87

für gefalzte Bänder in den Grössen

13 mm/20 mm/25 mm erhältlich.

# 88

für nicht gefalzte Bänder in den Grössen

28 mm/32 mm/38 mm erhältlich.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Accesorios para máquinas de coser de Bernina

Bernina

Bernina Spanish Hemstitch Equipment 47 Manual de usuario

Bernina

Bernina Medium Clamp Embroidery Hoop Manual de usuario

Bernina

Bernina Palm Precision Handles Manual de usuario

Bernina

Bernina HLT002 Manual de usuario

Bernina

Bernina Switch Regulator Manual de usuario

Bernina

Bernina Magnifying lens set Manual de usuario

Bernina

Bernina Mega Manual de usuario

Bernina

Bernina Pantograph Kit Manual de usuario

Bernina

Bernina Large Freearm Embroidery Hoop Manual de usuario

Bernina

Bernina Foldable Sit Down Table Manual de usuario

Manuales populares de Accesorios para máquinas de coser de otras marcas

Brother

Brother PR-600/600C Manual de usuario

Brother

Brother SA179 Manual de usuario

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SMT-7242 Manual de usuario

Jack

Jack 6040-D Manual técnico

JUKI

JUKI IP-410 Manual de usuario

ZOJE

ZOJE 1900D Manual de usuario

ELNA

ELNA 795-816-116 Manual de usuario

Baby Lock

Baby Lock General Purpose Zig Zag Foot Manual de usuario

ELNA

ELNA 202-248-004 Manual de usuario

Efka

Efka dc 1500 Manual de usuario

Baby Lock

Baby Lock BLQ2-QGF Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MP-G10-AH Manual de usuario

JUKI

JUKI IP-200 Guía del usuario

Sullivans

Sullivans Sew & Go Manual de usuario

Sailrite

Sailrite ULTRAFEED 120931 Manual de usuario

Brother

Brother ScanNCut DX Stamp Starter Kit Manual de usuario

ELNA

ELNA 495-526-20 Manual de usuario

$TEX ALL IN 1 Sleeve Board Pro Manual de usuario$

TEX

TEX ALL IN 1 Sleeve Board Pro Manual de usuario