Reading the history
Opon 1: Read out day per day directly on the device (30-day history)
Alarm display and conrmaon
opons
Opon 1- Alarm indicaon “all alarms”
With this opon the alarms will be visible on the display
with an alarm symbol for 30 days. By pressing the
READ buon, the warning symbol
will be disabled for
the corresponding alarms. The alarm symbol cannot
be canceled nor reset.
• In this mode only one upper and one lower alarm will
be triggered per day.
• The alarm symbol will be present on the display for
30 days.
• The warning symbol
will disappear when conrming
all exisng alarms in the readout mode.
Opon 2 - Alarm indicaon “unconrmed alarms”
The alarms are shown with the alarm symbol unl
all alarms (in the 30-day history) have been conrmed
as solved by pressing the READ buon. Aerwards the
display will show the OK symbol unl a new alarm is
triggered.
Conrmaon: Device is within the set alarm limits.
Press the READ buon and the alarm symbol and the
warning symbol
will immediately disappear. A new
alarm will be triggered as soon as the set alarm limits
are exceeded again.
Conrmaon: Device is outside the set alarm limits.
If the READ buon is pressed sll during a temperature
violaon the alarm symbol and the warning symbol
will stay on the display for the corresponding alarm.
Example of an OK display
Press READ.
Example of an alarm display
Press READ a
second me.
Note: Connue repevely pressing the READ buon to read
out the details of the past 30 days.
The following informaon is indicated on the screen:
• The alarm- and the warning symbol
• The corresponding ashing arrow (alarm indicator)
(example: Temperature out of lower alarm limit)
• The date of alarm:
1
6 02 2018
• The me of alarm:18 21
The following addional informaon is indicated on the
screen:
• Lowest recorded temperature of that day: -1
.1 ° C
• The duraon ot the exceedance of the preset low
temperature limit:
01:35
(hrs:min)
• Temperature recording in this example with internal
sensor
The following informaon is indicated on the display:
• The OK symbol
• The corresponding ashing arrow
(example: high arrow “today”
• The highest recorded temperature of that day: 0 5
• The me duraon out of the preset temperature
high limit: (hrs:min)
• Temperature recording in this example with internal
sensor
051
0 320
max.
°C
Int.Sensor
2nd display
1st display
Press READ once.
-11
0 351
min.
Int.Sensor
!°C
Indicaon of an
OK display
Indicaon of an
alarm display
8101 2026 56
1 473
°C
Int.Sensor
8101 2026
88
1 425
°C
Int.Sensor
!
In measurement mode, when an alarm has been trig-
gered, the following informaon is indicated:
• The alarm symbol
• An addional warning symbol
• The corresponding arrow (alarm indicator),
upper/lower alarm
• The current date and me: 6 02 2018/ 5 42
• The current temperature: 8 8
In measurement mode, when no alarm has been trig-
gered, the following informaon is indicated:
• The OK symbol
• The current date and me:16 02 2018/3 47
• The current temperature: 5 6
Screen displays during
measurement mode
