Bensat BEN400MC Manual de usuario

BEN400MC

www.bensat.cz

User’s manual

Uživatelský manuál

Užívateľský manuál

Instrukcja użytkownika

Felhasználói kézikönyv

Uporabniški priročnik

User’s manual - BEN400MC

IMPORTANTT NOTICE

Please read this user’s manual carefully to be able to safely install, use and

maintain the product at maximum performance. Keep this user’s manual next

to your product for future reference. The information in this user’s manual is

subject to change without notice.

Warnings, Cautions and Notes

Throughout the whole manual, pay special attention to the following marks

that indicate hazardous situations.

• Warning

Indicates a hazardous situation which could result in serious injury.

• Caution

Indicates a situation which could damage the equipment or other apparatus.

• Note

Indicates additional information to make the user aware of possible problems

and information of any

importance to help understand, use and maintain the installation.

Meaning of Symbols

To reduce the risk of electric shock, do not remove cover (or back).

No user serviceable parts inside.

Refer servicing to qualied service personnel.

This symbol indicates dangerous voltage inside the product that

presents a risk of electric shock or personal injury.

This symbol indicates important instructions accompanying the

product.

Safety Warning

This product has been manufactured to comply with international safety

standards. Please read the following safety precautions carefully.

Safety Instructions and Precautions

1. MAINS SUPPLY

90-250V A.C., 50/60Hz

  • Operatethisproductonlyfromthetypeof

power supply indicated on the marking label. If you are not sure of the

type of power supplied to your home, consult your local power company.

  • Disconnecttheproductfromthemains

before you start any maintenance or installation procedures.

 2.OVERLOADING

  • Donotoverloadawalloutlet,extension

cord or adapter as this may result in electric re or shock.

 3.LIQUID

 •Theproductshouldnotbeexposedtoliquidofanykind.Inaddition,no

objects lled with liquid should be placed on the apparatus.

 4.CLEANING

 •Disconnecttheproductfromthewalloutletbeforecleaning.

 •Usealightdampcloth(nosolvents)todusttheproduct.

 5.VENTILATION

 •Theslotsontopoftheproductmustbeleftuncoveredtoallowproper

airow into the unit.

 •Donotstandtheproductonsoftfurnishingsorcarpets.

 •Donotstackelectronicequipmentsontopoftheproduct.

 6.ATTACHMENTS

 •Donotuseanyunsupportedattachmentsasthesemaybehazardousor

cause damage to the product.

 7.CONNECTIONTOTHECABLETVSIGNAL

 •Connectallcomponentsbeforeplugginganypowercordsintothewall

outlet. Always turn o the product,TV and other components before you

connect or disconnect any cables.

8.CONNECTIONTOTHETV

 •Disconnecttheproductfromthemainsbeforeconnectingordisconne-

cting the cable from the TV. Failure to do so can damage the TV.

 9.LOCATION

 •Placetheproductindoorstoavoidexposingittolightning,rainorsun.

 •Donotplaceitneararadiatororheatregister.

 •Werecommendthattheproducthas10cmclearancefromanyother

appliances susceptible to electromagnetic inuences, such as a TV or a

VCR.

 •Donotblocktheopeningswithanyobject,anddonotplacetheproduct

on a bed, sofa, rug, or other similar surface.

 •Ifyouplacetheproductona rackorabookcase,ensurethatthereis

adequate ventilation and that you have followed the manufacturer’s

instructions for mounting.

 •Donotplacetheproductonanunstablecart,stand,tripod,bracket,or

table where it can fall. A falling product can cause serious injury to a child

or adult, and serious damage to the appliance.

10.LIGHTNING,STORMorNOTINUSE

 •Unplug theproductfromthewalloutlet anddisconnecttheantenna

during a thunderstorm or when left unattended and unused for long

periods of time. This will prevent damage to the unit due to lightning

and power-surges.

11.EXTRANEOUSOBJECTS

 •Donotinsertanythingthroughtheopeningsintheunit,wheretheycan

touch dangerous voltage points or damage parts.

12.REPLACEMENTofPARTS

 •Whenreplacementofpartsisrequired,besuretheservicetechnicianuses

replacement parts specied by the manufacturer or those that have the

same characteristics as the original part. Unauthorized substitution may

result in additional damage to the unit.

Warning

1. To avoid damage of the power cord or plug;

 •Donotmodifyorprocessthepowercordorplugarbitrarily.

 •Donotbendortwistthepowercord.

 •Makesuretodisconnectthepowercordholdingtheplug.

 •Keepheatingappliancesasfaraspossiblefromthepowercordinorder

to prevent the cover vinyl from melting.

 •Themainsplug,asadisconnectiondevice,shallremainreadilyaccessible

by the user.

2. To avoid electrical shock;

 •Donotopenthemainbody.

 •Donotinsertmetalorinammableobjectsinsidetheproduct.

 •Donottouchthepowerplugwithwethands.

 •Disconnectthepowercordincaseoflightning.

3. To avoid damage of product;

 •Donotusetheproductwhenitisoutoforder.Ifyoucontinuetousethe

product when defective, serious damage can be caused to it. Make sure

to contact your local product distributor if the product is out of order.

 •Donotinsertmetaloraliensubstanceintotheslotsforthemodulesor

Smartcards. It may cause damage to the product and reduce its life span.

4. Standby Mode;

 •ItisrecommendedtoleavetheproductinStandbymodeduringlong

periodswhennotbeingusede.g.Overnight.

CONTENTS

1. GETTING STARTED

1.1 PACKAGE CONTENTS

1.2 FRONT PANEL

1.3 REAR PANEL

1.4 REMOTE CONTROL UNIT (RCU)

1.5 CONNECTING TV

1.6 CONNECTING AUDIO SYSTEM

1.7 POWERING ON

2. INSTALLATION

2.1 ANTENNA SETTING

2.2 SATELLITE LIST

2.3 TRANSPONDER LIST

2.4 MOTOR SETTING

2.5 LIMIT SETUP

3. SETTING

3.1 NETWORK SETTING

3.2 LANGUAGE

3.3 A/V

3.4 DATE TIME

3.5 TIMER LIST

3.6 PARENTAL LOCK

3.7 UPGRADE

3.7.1 USB Upgrade

3.7.2 Network Upgrade

3.8 VERSION

3.9 FACTORY RESET

4. CHANNEL MANAGEMENT

4.1 CHANNEL MANAGER

4.1.1 Move

4.1.2 Lock

4.1.3 Delete

4.1.4 Skip

4.1.5 Sort

4.1.6 Rename

4.1.7 Find

4.2 FAVORITE LIST

5. MEDIA CENTER

5.1 MULTIMEDIA SETUP

5.2 MULTIMEDIA PLAYER

5.2.1 Movie

5.2.2 Music

5.2.3 Native32 Games

5.2.4 Photo

5.2.5 Record Manager

5.2.6 Disk Manager

5.2.7 EBook

5.3 MULTIMEDIA APLLICATIONS

5.3.1 N32 Game

5.3.2 Web Albums

5.3.3 Google Maps

5.3.4 Weather

5.3.5 YouTube

5.4 PVR SETUP

5.5 FTP CLIENT

5.6 SAMBA

5.7 GAME

6. SPECIFICATION

1. GETTING STARTED

1.1 PACKAGE CONTENTS

 Beforeusingyourproduct,pleasecheckallpackagecontentsbeforeusing

your product.

 •RemoteControlUnit

 •Batteries

 •User’sManual

 •RCACable

1.2 FRONT PANEL

1. Power

Switches between operation and standby modes

 2.ChannelUp/DownButton

 MovestheTV/RADIOchannelupordown

 3.Display

 Showschannelinformation,eitherTVorRADIO

 4.USB

 ConnectstoanUSBcable

5. Smart Card Reader

 One(1)slotforasmartcard

6. Common Interface

 One(1)slotforConditionalAccessModule

1.3 REAR PANEL

 1.LNBIN

Connects to the satellite antenna cable

 2.LNBOUT

Connects to another digital satellite receiver

 3.ETHERNET

 ConnectstothenetworkwithanEthernetcable

 4.HDMI

 ConnectstotheTVusingHDMIConnector

 5.USB

 ConnectstoanUSBcable

 6.AUDIOL/R

Connects to the TV and outputs audio signals

 7.VIDEO

Connects to the TV and outputs video signals. (Using RCA)

 8.S/PDIF

 Outputsthedigitalaudiosignals

9. TV SCART

Connects to a TV SCART cable

10. RS-232C

Connects to the PC to upgrade the software programme of the product

11.ON/OFF

 TurnsOn/O

Displaysthehistorychannellists

DisplaystheMediaPlayermenu

Marks a particular place in the program

Changes the aspect ratio

1.5 CONNECTING TV

(1)ConnectingwithHDMIcable

TheHDMIconnectionisrecommendedforDigitalTV.IncasetheTVhasaHDMI

input connector, a special all digital interface that provides the highest picture

quality,connecttheproducttotheTVwiththeHDMIcable.

(2) Connecting with RCA Cinch cable

PlugoneendofthecableintotheVIDEO(yellow)socketontheproduct,and

plug the other end into the matching socket on TV set.

PlugoneendsofthecableintotheAUDIOL(white)andAUDIOR(red)sockets

on the product, and the other ends into the matching sockets on the product

or audio-video receiver.

(3) Connecting with SCART cable

The SCART cable connection is recommended for Analog TV. Connect the

product to the TV with the SCART.

1.6 CONNECTING AUDIO SYSTEM

If you have external audio system like home theater, you can enjoy better

and powerful audio as below

-Dolbydigital(optical):UseS/PDIFopticalcableintoDolbydigitaldecoder

-Stereo:Use2-RCAcableforAudioL/R

1.7 POWERING ON

(1) Connect the power cord of the product to a wall outlet.

(2)MakesurethattheON/OFFswitchattherearpanelisswitchedtoON.

(3)PoweronbypressingthePOWERbuttonoftheremotecontrolunitorthe

POWERbuttonatthefrontpaneloftheproduct.

2. INSTALLATION

 •Thedefaultpasswordis“0000”

This chapter includes the rst time setup of the Antenna Setting, Satellite List,

Transponder List, Motor Setting and Limit Setup.

2.1 ANTENNA SETTING

AntennaSettingenablesyoutoenterthevaluessuchasSatellite,LNBType,

LNBFrequency,Transponder,22kHzTone,LNBPowerandDiSEqCModeof

each item and start channel search.

(1)Satellite:SelecttherequiredsatelliteusingtheOKort u button and

presstheOKbutton.

(2)LNBType:SelecttherequiredLNBTypeusingtheOKort u button

andpresstheOKbutton.

(3)LNBFrequency:SelecttherequiredLNBfrequencyusingtheOKort u

buttonandpresstheOKbutton.

(4)Transponder:SelecttherequiredsatelliteusingtheOKort u button

andpresstheOKbutton.

(5)22KHz:SelectOn/O/AutousingtheOKort u button and press the

OKbutton.

(6)LNBPower:SelectOn/OusingtheOKort u button and press the

OKbutton.

(7)DiSEqCMode:SelecttherequiredDiSEqCinputusingtheOKort u

buttonandpresstheOKbutton.

(8)PresstheBluebuttontostartscanmethod.

 •ChannelType:SelectAll/FTAusingthet u button.

 •ScanType:SelectAutoScan/BlindScan/ManualScanusingt u button.

(9)PresstheOKbuttontostartchannelsearch.

(10)Please wait while the search continues. If you want to stop the search,

presstheExitbutton.

(11)When channel search is complete, the results will appear. Select Yes and

presstheOKbuttontosavetheresults.

Note:

 •IfyoucannotndtherequiredLNBfrequencyfromthelist,enterthe

frequencyusingtheNUMERIC(0-9)buttonsmanuallyandpresstheOK

button.

 •WhenusinguniversalLNB,selectUniversal(9750/10600).The22kHztone

value will be disabled.

2.2 SATELLITE LIST

Satellite List enables you to check antenna setting of each satellite, and

performAdd,Edit,andDeletefunctionsforsatellites.

(1)Info:Changethevaluesofantennasettingfortheselectedsatellite

(2)Add:Addanewsatellite

(3)Edit:Changetheselectedsatellitename,positionorlongitude

(4)Delete:Deletetheselectedsatellite(s)

(5)Scan:Startchannelsearchfortheselectedsatellite(s)

Note:

 •Deletingsatellite(s)willcausedeletingallthechannelsbelongedtothe

selected satellite(s).

2.3 TRANSPONDER LIST

Transponder List enables you to check antenna setting and satellite of each

transponder,andperformAdd,Edit,andDeletefunctionsfortransponders.

(1)Info:Changethevaluesofantennasettingfortheselectedtransponder

(2)Sat:Makealistofallthetranspondersaccordingtotheselectedsatellite

(3)Add:Addanewtransponder

(4)Edit:Changefrequency,symbolrateorpolarisation

(5)Delete:Deletetheselectedtransponder(s)

(6)Scan:Startchannelsearchfortheselectedtransponder(s)

2.4 MOTOR SETTING

MotorSettingenablesyoutosetupmotorsettingifyouhaveDiSEqCmotor

installed with your antenna.

(1)Satellite:Selectasatellitetosetup

(2)Transponder:SelectTPfrequencyyouwanttosearch

(3)Motorsetting:SelectDisable/USALS/DiSEqC1.2

(4)Movestep:Pressthet u button to move motor in each direction.

Motor moves only one step to locate satellite in a precise position

(5)Continuingmove:Pressthet u button to move motor in each direction.

MotormovescontinuouslyuntilstopitbypressingtheOKbutton

(6)GoTo:Movethemotortothestoredpositionoftheselectedsatellite

(7)Position:Selectthesatelliteposition

(8)Save:Savethevalues.

(9)Reset:Resetallstoredvalues.

2.5 LIMIT SETUP

(1)LimitSetup:SelectSetEastLimit/SetWestLimit/DisableLimitusingthe

OKorpqbuttonandpresstheOKbutton

(2)Continuingmove:Pressthet u button to move motor in each direction.

MotormovescontinuouslyuntilstopitbypressingtheOKbutton.

(3)Movestep:Pressthet u button to move motor in each direction.

Motor moves only one step to locate satellite in a precise position

3.SETTING

This chapter includes the rst time setup of Network setting, language, A/V,

DateTime,TimerList,ParentalLock,Upgrade,VersionandFactoryReset

which will show you how to start the initial installation.

3.1NETWORKSETTING

Network Setting enables you to congure the wired or wireless connection.

(1)LinkType:PresstheOKort u button. Select Wire Network/Wi-Fi

Network using pqbuttonandpresstheOKbutton.

(2)Cong:PresstheOKort u button.

 (a)UsuallytheIPaddressisautomaticallyassignedbytherouter(DHCP)

(b) If you need to assign a static IP address to your product, please enter

theIPaddress,Netmask,GatewayandDNSServer.

(3)PingTest:PresstheOKort u button.

3.2 LANGUAGE

Language Setup allows you to select the main language from the given

language option.

(1)OSDLanguage:PresstheOKort ubuttontodisplayOSDlanguage

list. Select the language that you want by pressing pq button and press

theOKbutton.

(2)OSDTransparency:SelecttheOSDtransparencylevelthatyouwantand

presstheOKbutton.

(3)1st/2ndPreferredSubtitle:PresstheOKort u button to display the

1st and 2nd Subtitle language lists. Select the language that you want

by pressing pqbuttonandpresstheOKbutton.

(4)HardHearing:SelectOn/OusingtheOKorpq button and press the

OKbutton.

(5)1st/2ndPreferredAudio:PresstheOKort u button to display the

1st and 2nd Audio language lists. Select the language that you want by

pressing pqbuttonandpresstheOKbutton.

3.3 A/V

AV Setup allows you to adjust the output of the audio or video.

(1)Contrast:PresstheOKort u button to adjust contrast between 0 and

24andpresstheOKbutton.

(2)Brightness:PresstheOKort u button to adjust brightness between

0and24andpresstheOKbutton.

(3)Saturation:PresstheOKort u button to adjust saturation between 0

and24andpresstheOKbutton.

(4)Hue:PresstheOKort u button to adjust hue between 0 and 30 and

presstheOKbutton.

(5)SPDIF:SelectBitsream/Mute/PCMbypressingbypressingtheOKorpq

buttonandpresstheOKbutton.

(6)AspectRatio:Select16:9/FullScreen/4:3LB/4:3PSbypressingbypressing

theOKorpqbuttonandpresstheOKbutton.

(7)VideoOutput:SelectRGB/CVBSbypressingbypressingtheOKorpq

buttonandpresstheOKbutton.

(8)TVType:SelectPAL/NTSC/AutoDetectbypressingbypressingtheOKor

pqbuttonandpresstheOKbutton.

(9)Video Resolution: Select Auto Detect/576i_25/576p_50/

720p_50/1080i_25/1080p_50bypressingbypressingtheOKorpq

buttonandpresstheOKbutton.

3.4 DATE TIME

DATETIMEallowsyoutosetyourcurrenttimeaccordingtoyourlocation.

(1)Mode:SelectAuto/ManualbypressingbypressingtheOKorpq button

andpresstheOKbutton.

(2)Date:InputdirectlyYear/Month/DateusingtheNUMERIC(0-9)buttons

manuallyandpresstheOKbutton.

(3)Time:InputdirectlyHour/Minute/SecondusingtheNUMERIC(0-9)buttons

manuallyandpresstheOKbutton.

(4)TimeZone:SelectGMTtimezonebypressingbypressingtheOKorpq

buttonandpresstheOKbutton.

(5)DaylightSaving:SelectOn/ObypressingbypressingtheOKorpq

buttonandpresstheOKbutton.

3.5 TIMER LIST

Timer List enables you to reserve new programmes you wish to watch, and

modify/delete programmes reserved. You can also set the time you want to

turn/o the product.

PresstheOKbuttontodisplayTimerEdit.

(1)Date:Pressthet ubutton.InputdirectlyYear/Month/Dateusingthe

NUMERIC(0-9)buttonsmanuallyandpresstheOKbutton.

(2)ProgramName:Pressthet u button. Select the channel you want

using pqbuttonandpresstheOKbutton.

(3)StartTime:Pressthet u button.SetstartingtimeusingtheNUMERIC

(0-9)buttonsmanuallyandpresstheOKbutton.

(4)EndTime:Pressthet ubutton.SetendingtimeusingtheNUMERIC

(0-9)buttonsmanuallyandpresstheOKbutton.

(5)Duration:Pressthet u button. Set duration time (Hour/Minute) using

theNUMERIC(0-9)buttonsandpresstheOKbutton.

(6)Mode:Pressthet ubutton.Selectpreferences(Once/Daily/Weekly/

Monthly) using pqbuttonandpresstheOKbutton.

(7)Type:Pressthet u button. Select preferences (Recorder/Channel/

Standby/On)usingpqbuttonandpresstheOKbutton.

(8)Mode:Pressthet ubutton.Selectpreferences(Once/Daily/Weekly/

Monthly) using pqbuttonandpresstheOKbutton.

(9)SubtitleRecord:Pressthet u button.SelectOn/Ousingpq button

andpresstheOKbutton.

(10)TeletextRecord:Pressthet u button.SelectOn/Ousingpq button

andpresstheOKbutton.

3.6 PARENTAL LOCK

Parental Lock enables you to set system lock, parental rating and change

Pin Code.

 •Thedefaultpasswordis“0000”

(1)SystemLock:PresstheOKort ubutton.SelectOn/Opq button

andpresstheOKbutton.

(2)ParentalRating:PresstheOKort u button. Set parental rates using

pqbuttonandpresstheOKbutton.

(3)ChangePinCode:PresstheOKort u button.EnteryournewPinCode

usingtheNUMERIC(0-9)buttonsmanuallyandpresstheOKbutton.

3.7 UPGRADE

UpgradehelpsyoutoupgradethelatestsoftwareversionviaUSB,Network

or FTP.

3.7.1.USBUpgrade

(1)PutUSBmemoryintoUSBport.

(2)SelectthesoftwarelewhichyouwanttoupgradeinUSBmemoryand

presstheOKbutton.

Note:

 •PleaseneverpullouttheUSBmemoryorturnotheproductwhile

upgrading.

3.7.2. Network Upgrade

(1)Protocol:PresstheOKort u button. Select FTP/HTTP using pq

buttonandpresstheOKbutton.

(2)URL:PresstheOKort ubutton.EnterURLusingtheNUMERIC(0-9)

buttonsmanuallyandpresstheOKbutton.

(3)UserName:PresstheOKort ubutton.Enterusernameusingthe

NUMERIC(0-9)buttonsmanuallyandpresstheOKbutton.

(4)Password:PresstheOKort ubutton.Enterpasswordusingthe

NUMERIC(0-9)buttonsmanuallyandpresstheOKbutton.

(5)SelectFile:PresstheOKort u button.Entertheaddressthatthelatest

softwarelocatesusingtheNUMERIC(0-9)buttonsmanuallyandpressthe

OKbutton.

(6)Start:Pressstarttoupgradesoftware.

3.8 VERSION

This option helps you to know the current hardware, software and rmware

version and build date.

3.9 FACTORY RESET

Factory reset functions only when you want to return the product to the

condition of factory default. All settings and channels will be deleted.

 •Thedefaultpasswordis“0000”

4 CHANNEL MANAGEMENT (MGT)

This chapter will help you to swap, lock, delete, skip, edit channels and make

lists of favorite channels.

4.1 CHANNEL MANAGER

Channel manger enables you to swap, lock, delete, skip or edit channels in

all channel lists.

4.1.1 Move

(1) Select a channel to move using pqbuttonandpresstheOKbutton.The

color of selected channel will be changed to yellow.

(2)LocatecursortothepointyouwanttoputandpresstheOKbutton.

4.1.2 Lock

(1) Select a channel to lock/unlock using pq button and press the Red

button.

(2)EnterthepasswordusingtheNUMERIC(0-9)buttonsmanually.

 Thedefaultpasswordis“0000”

4.1.3 Delete

Otros manuales para BEN400MC

Tabla de contenidos

Idiomas:

Otros manuales de DVR de bensat

bensat

bensat BEN400MC Manual de usuario

bensat

bensat BEN120HD Manual de usuario

Manuales populares de DVR de otras marcas

FLIR

FLIR M3100E Series Manual de usuario

VTRACKPRO

VTRACKPRO FPRO300 Manual de usuario

Swann

Swann NVR-7085 models Manual de usuario

XtendLan

XtendLan DVR-1670C Manual de usuario

urmet domus

urmet domus 1093/004AHD Manual de usuario

Holux

Holux M1 Manual de usuario

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manual de usuario

Whistler

Whistler D16VRS Manual de usuario

Defender Security

Defender Security 82-20235 Manual de usuario

MISUMI

MISUMI MP-WF100M Manual de usuario

Speco

Speco D8HU Manual de usuario

UST

UST DDR-E04AA Instrucciones de uso

Consolidated

Consolidated Digital Video Recorder Manual de usuario

Mace

Mace DVR0404RW Guía de inicio rápido

RCA

RCA RTD315W Manual de usuario

FSM

FSM Colibri Grande PRO Manual de usuario

Hauppauge

Hauppauge HD PVR 2 Manual de usuario

Identivision

Identivision ICR-PH161i PIONEER Manual de usuario