Operation Instruction
Quick Release Wheel (Figure 1)
As is shown a, b, crepresents the side tilt quick gear disengage wheel, pan adjustment quick gear disengage wheel and front &back
quick gear disengage wheel, which is suitable for fast wide range adjustment. Rotate the quick gear disengage wheel to release the
gear, do not release the wheel until you have positioned the head. This allows a rapid adjustment for large moves without being gear
driven.
Side Tilt Adjustment (Figure 2, 3)
Rotate the side tilt knob clockwise or counterclockwise to adjust the side imaging angle to aproper position, just release the knob and
your angle is secure.
Front &Back Tilt Adjustment (Figure 4)
Rotate the front and back tilt knob clockwise or counterclockwise to adjust the front and back tilt imaging angle to aproper position,
just release the knob and your angle is secure.
Pan Adjustment (Figure 5)
Rotate the pan knob clockwise or counterclockwise to adjust the head in 360 degrees clockwise or counterclockwise, just release the
knob and your angle is secure.
Mount the Head on the Tripod (Figure 6)
Mount the head to asuitable tripod or support. It will screw onto a3/8-16 mount. It is recommended to use safety lock down screws if
available on your support.
®Specifications and design are subject to change without notice.
