BenQ WM04G4 Manual de usuario

Installation Manual

●Be sure to read this manual thoroughly and to do the installation work safely.Keep

this manual available for future reference.

●Sufficient expertise is required for installing this projector wall mount.

●Do not use the projector wall mount for purposes other than for which it is designed.

D：Projection distance

V：Distance between the wall plate and the upper of image

Important Safety

Checking The Installation Position

Checking The Supplied Accessories

Projection

screen

Wall plate

Projector(with the projector

mounting plate)(1)

Setting plate (1) Wall plate (1)

* Screw f has been locked on the wall plate.

L5Allen key

diagrammatic

presentation

designation

quantity

L3Allen key

Screw(M6X55)

Φ10mm Anchor bolt

Screw(M4X10)

Screw(M5X10)

Be sure to read this manual thoroughly to do the installation work.

3For safety reasons, check the strength of the wall before installation. If the wall is not strong

enough, reinforce it sufficiently before installation.

4Do not make alterations to the projector wall mount.

Do not hit or hang any heavy objects on the projector wall mount. If the projector wall mount is damaged,

stop use and contact a qualified service person immediately.

When dismounting the projector from the projector wall mount, be sure to unplug the AC power cord and

other connecting cables beforehand.

Use the supplied accessories only. Use of accessories other than those supplied may result in damage to

the projector wall mount.

To avoid fire, do not install the projector with the projector wall mount in a humid or excessively dusty place.

Please install this apparatus only on the horizontal surface instead of the slanting one.

5Do not install the projector wall mount on a wall subject to vibration or impact.

Only qualified service personnel (two or more) should carry out installation or dismounting of the projector

from the projector wall mount.

* Manufacturer is not liable for any damages or injury caused by mishandling or improper installation.

Use with products heavier than the maximum weights(Weight Capacity：＜15kg) indicated may

result in instability causing possible injury.

ＥＮＧＬＩＳＨ

Wall plate cover (1)

195mm

235mm

Wall plate

Wall cover

inch

±5°

360mm~665mm

141mm

Regulating range

0~40mm

Regulating range

0~30mm

Checking The Installation Position

● According to the scale to determine the screen size .Scale parameters are for

reference only.

ＥＮＧＬＩＳＨ

360mm 380mm 410mm 440mm 470mm 500mm 530mm 560mm

14 4in

75"

77"

80"

82"

85"

90"

92"

95"

97"

100"

XGA

4:3

WXGA

16:10

68"

70"

75"

77"

80"

82"

85"

80"

85"

87"

90"

92"

95"

97"

100"

image

To Set The Projector Wall Mount On The Wall

● According to the scale to determine the installation height of the wall plate .

Scale parameters are for reference only

* You can find this form in the projector packaging.

* Please refer the installation chart in projector UM and QSG for proper installation

evaluation.

XGA

4:3

WXGA

16:10

68"

70"

75"

77"

80"

82"

85"

80"

85"

87"

90"

92"

95"

97"

100"

ＥＮＧＬＩＳＨ

To Set The Projector Wall Mount On The Wall

● The bracket is suitable for concrete wall mounting or wooden stud wall.

● Concrete wall mounting thickness must be a minimum 100mm. Anchor bolt and screw

(M6 × 55) are needed to be used for installation.

● Dry-wall mounting thickness must be a minimum 70mm. Only screw(M6 × 55) is needed

to be used for installation, and gypsum board

thickness not greater than 3/8 inch. If the wall

is not strong enough, reinforce it sufficiently

before installation.

● Please contact manufacturer if you have

any questions about mounting surface issue.

>55mm

ø10~11mm b

Concrete wall mounting

Use anchor bolt

>55mm

ø3mm

Dry-wall mounting

Not use anchor bolt

Remove the decorative cover

Loose the screws e

Loose the screws f

screw (M6 × 55) are needed to be used

for installation in concrete wall mounting

screw central

point

When installation on the

wood stud wall,the stud

position of the mount wall

surface shall be defined,

the fixed screw central

point shall be aligned with

the central line of stud.

To set the projector wall mount on the wall Tighten up the screws

screw (M6 × 55) are needed to be used

for installation in dry-wall mounting

ＥＮＧＬＩＳＨ

30mm

Adjust the leftward/rightward

slide:30mm

To Set The Projector Wall Mount On The Wall

● Move the mouting plate and adjust the leftward/rightward slide.

● Move the raised Wall plate and adjust the upward/downward slide.

Adjustment direction

Adjust the upward/downward

slide:40mm

40mm

Wall cover

Adjustment

direction

To Install The Projector On The Projector Wall Mount

ＥＮＧＬＩＳＨ

To Install The Projector On The Projector Wall Mount

To Adjust The Vertical Tilt

Adjustment buttons

Adjustment

direction

Adjustment buttons Adjustment direction

To Adjust The Horizontal Roll

● Locking the screw e. ● Please put the power cable and other cables

through the setting plate at the top of the hole.

Connect the

power cable

and other cables

to the projector.

The power cable and

other cables through

the Setting plate.

ＥＮＧＬＩＳＨ

Product Information:

To Adjust The Forward/Backward Slide

To Put On The Decorative Cover

Adjustment buttons

Adjustment direction

To Adjust The Horizontal Rotation

Net weight: 3.5kg Rated capacity: 15kg

Adjustable angle: Longitudinal inclination、Level angle、Yaw angle±5°(3 directions)

Adjustable range: From the installation plate center horizontal distance 360mm  665mm

Adjustable range for upward/downward slide : 40mm

Adjustable range for leftward/rightward slid: 30mm

ＥＮＧＬＩＳＨ

Tabla de contenidos

Otros manuales de Accesorios para proyectores de BenQ

BenQ

BenQ PointWrite Manual de usuario

BenQ

BenQ InstaShare Manual de usuario

BenQ

BenQ 0.4 Wall Mount-WM04G3 Manual de usuario

BenQ

BenQ PointWrite Manual de usuario

BenQ

BenQ 0.3 Wall Mount Manual de usuario

BenQ

BenQ InstaShow WDC10T Manual de usuario

BenQ

BenQ LH856UST Manual de usuario

BenQ

BenQ WDC20C Manual de usuario

BenQ

BenQ RS232 Commands Manual de usuario

BenQ

BenQ PointWrite PT20 Manual de usuario

BenQ

BenQ WDC10 InstaShow Guía de referencia rápida

BenQ

BenQ InstaShow X Manual de usuario

BenQ

BenQ ScreenBar Manual de usuario

BenQ

BenQ LX710 Manual de usuario

BenQ

BenQ 0.4 Wall Mount-WM04G3 Manual de usuario

BenQ

BenQ InstaShow VS20 Manual de usuario

BenQ

BenQ InstaShow S Manual de usuario

BenQ

BenQ 0.3 Wall Mount-WM03G2 Manual de usuario

BenQ

BenQ PointWrite PW30U Manual de usuario

BenQ

BenQ InstaShow VS10 Manual de usuario

BenQ

BenQ Ceiling Mount-CM00G2 Manual de usuario

BenQ

BenQ InstaShow WDC10TC Manual de usuario

BenQ

BenQ PT01 Manual de usuario

BenQ

BenQ InstaShow WDC10R Manual de usuario

Manuales populares de Accesorios para proyectores de otras marcas

Optoma

Optoma BX-AL133B Manual de usuario

PEERLESS

PEERLESS PE 1120 Guía

Osram

Osram SIRIUS HRI Series Manual

Presentation Switchers

Presentation Switchers PS111 Manual de usuario

Kramer

Kramer VIA GO Manual de usuario

Yamaha

Yamaha PJL-112 Manual de lista de piezas

Swedstyle

Swedstyle CL23AA02ZA25E Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 236CB Manual del propietario

Epson

Epson BrightLink 475Wi Manual de usuario

Acer

Acer WP100 Manual de usuario

i3 i3board Manual de usuario

CHIEF

CHIEF HB-43E Manual de usuario

Biamp

Biamp Modena Hub Manual de servicio

NEC

NEC MP10RX Manual de usuario

Panamorph

Panamorph DCR-S3 Manual de usuario

Exact solutions

Exact solutions FRAME-EVO-P10 Manual de usuario

CHIEF

CHIEF VCM103S Manual de usuario

InFocus

InFocus LP70+ Guía