BenQ SE2231 Manual de usuario
English
Table of Contents i
Table of Contents
Part I: Quick Start Guide.......................................... 1
1. Please read these instructions .......................................2
What's in the Quick Start Guide? ............................................ 2
What's in the User Manual? ..................................................... 2
2. Package contents............................................................2
3. Select and prepare the installation location.................3
4. Installing the Base..........................................................4
5. Disconnecting the base and arm ..................................5
6. Adjust the viewing angle ...............................................6
7. Connect the antenna cable............................................6
8. Connect the power cable................................................7
9. Activate the remote control ..........................................8
Installing batteries .................................................................... 8
Battery safety notice ................................................................. 8
Using the remote control ......................................................... 9
10.View the TV programs..................................................10
Care and cleaning information..........................................10
What's next?........................................................................11
Part II: User Manual ................................................. 12
Getting to know your TV...................................................13
Introduction ............................................................................. 13
Input options ............................................................................ 13
Analog TV source input..................................................................13
Composite Video (AV)/S-Video source input...............................13
Component video input .................................................................14
Other Graphic input.......................................................................14
Front view/Control Panel......................................................... 15
Rear view................................................................................... 16
Getting to know the remote control..................................17
Remote control-A..................................................................... 17
Remote control-B ..................................................................... 19
Using the remote control ...................................................21
Power on, off and standby........................................................ 21
Adjusting sound setting ........................................................... 21
Changing channels ................................................................... 22
Selecting a picture modes......................................................... 22
English
ii Table of Contents
Freeze image on screen............................................................. 22
Using the sleep timer................................................................ 22
Display information for current input source ........................ 22
Adjusting backlight................................................................... 23
Adjusting aspect ratio............................................................... 23
Connecting video and audio signals .................................24
Input options ............................................................................ 24
Connecting the Composite Video input ................................. 24
Connecting the S-Video input................................................. 25
Connecting the Component Video input ............................... 25
Connecting the PC input ......................................................... 26
Connecting the DVI input....................................................... 26
Connecting the HDMI input .................................................. 27
Connect to a Stereo audio Output........................................... 27
Connecting the headset audio output..................................... 28
OSD (On-Screen Display) menu.......................................29
OSD structure........................................................................... 29
Navigating the OSD menu....................................................... 30
Operations in the OSD menu.................................................. 30
PICTURE menu ....................................................................... 31
SOUND menu .......................................................................... 33
SETUP menu ............................................................................ 34
TV menu ................................................................................... 35
Manual search .................................................................................35
Channel Edit....................................................................................36
Child lock ........................................................................................37
PC menu ................................................................................... 39
Reference.............................................................................40
Copyright.................................................................................. 40
Disclaimer................................................................................. 40
Battery safety notice ................................................................. 40
Dimensions............................................................................... 40
Specifications ............................................................................ 41
Supported PC (D-Sub/DVI) input signal resolutions............ 42
Supported Component Video input signal resolutions.......... 42
Supported HDMI input signal resolutions............................. 43
Setting up appropriate output resolution on PC.................... 43
Troubleshooting ....................................................................... 44
TV Problems ...................................................................................44
Antenna problems...........................................................................45
DECLARATION OF RoHS COMPLIANCE........................... 46
English
SE2231
Color LCD TV
Part I: Quick Start Guide
Welcome
English
2 Part I: Quick Start Guide
1. Please read these instructions
Thank you for purchasing this BenQ LCD TV. This TV is a state-of-the-art flat LCD TV
and will provide you with years of wonderful visual experience. Please take a few minutes
to closely read these quick start instructions before installing and using the TV.
What's in the Quick Start Guide?
The first part of this manual, the Quick Start Guide, gives you only the necessary
information that helps you to set up and put your TV in operation in a quickest way.
What's in the User Manual?
The second part of this manual, the User Manual, details the features and functions
provided by your TV and remote control, shows you how to connect your TV to other
devices, and provides its product specifications and troubleshooting information for your
further assistance. The part also guides you through how to customise the TV settings
best suit for you and to your viewing environment, helping you to gain the best viewing
experience from your TV
2. Package contents
Unpack the TV and check that all the following items are included:
The actual items come with your TV, such as the power cable, may look different from that illustrated
depending on where the TV was purchased.
If you find any item missing or damaged, contact your dealer immediately for help. Please keep the
product documentation in a safe place for future reference.
This TV should be handled with care to avoid damaging it, as well as the safty of yourself and anyone
around it. Here are some advices on how to handle the packaging:
• Recycle the cardboard carton.
• Keep the plastic bags away from young children and babies.
• Keep the packaging for possible future transporting of the TV.
• Make sure there is no accessary left in the packaging materials before discard the packaging.
On the LCD screen, there is a very thin protective layer of glass. Such layer is so fragile that
can be easily scratched and cracked. The liquid crystal substrate is also liable to damage
under excessive force or extreme temperatures. Please handle with care.
LCD TV (x1) Power cord (x1) VGA cable (x1)
AAA battery
(x2)
Quick Start Guide/
UserManual (x1)
Warranty
Card (x1)
Remote
control (x1)
English
Part I: Quick Start Guide 3
3. Select and prepare the installation location
In order to prevent potential dangers and prolong the service life of the TV, please observe
the following points when installing, operating and cleaning the TV.
Do NOT place the TV on an
uneven, sloping or unstable surface
where it may fall and cause damage to
itself or others.
Have a qualified technician secure the
display where it is placed in case there
is an earthquake.
Do NOT place the TV near water, like
a spa or pool, or in a position which
will allow the splashing or spraying
of water onto the display, like in front
of an open window where rain water
may enter.
Do NOT place the TV near or above
sources of heat, such as radiators,
heaters, fuel stoves and other heat-
generating items (including audio
amplifiers).
Otherwise heat may cause damages
to the outer casing as well as the
components inside.
If wall mounting, allow appropriate
space on top for attaching the TV to
the wall bracket.
If wall mounting, have a suitable
qualified and experienced
tradesperson mount it safely. Use
only a recommended TV wall
bracket for this model display and
ensure that the mounting bracket
(optional accessory) is securely
screw fixed to the wall structure, and
not just the wall render, lining or
cladding. Ensure the bracket is level
horizontally. Do not glue the
bracket to the wall.
Do NOT place the TV in an
enclosed place without allowing
for ventilation.
All Liquid Crystal TV (LCD)
screens have a very thin protective
layer of glass which is liable to
marking or scratching, and cracking
if struck or pressured.
The liquid crystal substrate is also
liable to damage under excessive
force or extreme temperatures.
Please handle with care.
Do NOT cover or block the vents
and openings while the TV is
switched on, as the heat may
accumulate inside the display and
result in danger.
Do NOT place the TV in direct sun or
where direct sun or spot lighting will
shine onto the display, as the heat may
damage the TV and the bright light
will make viewing the display more
difficult than necessary.
If recessed into a wall opening, you
must leave appropriate free space
both top and bottom for mounting
and removing the TV.
When installing the TV, connect the
power cord to socket-outlet which
must be provided near the TV and
easily accessible. If a fault should
occur during operation of the unit,
operate the disconnect device to
switch the power supply off, or
disconnect the power cord.
Observe all warnings and cautions as
labelled on the TV.
English
4 Part I: Quick Start Guide
4. Installing the Base
Important safety notes
Please pay attention to the following before installing:
For safety reasons, it is recommended that the installation be carried out by at
least two adult persons.
The LCD panel of the display is extremely fragile and subject to damages easily.
Avoid touching the LCD panel when installing or moving the display, and
take precautions not be let any objects come into contact with the panel. It is
recommended that you use a soft, clean and lint-free towel to protect the display
when installing.
Pay attention to the stability of the location where the display will be placed.
Follow the instructions below to install the TV stand:
Open the box, and make sure all necessary parts are in the box. The package
contains:
1. Cover an even stable surface with a soft cloth. Place the LCD TV unit facedownon
the cloth. Fit the stand onto the bottom of the LCD TV unit as shown:
LCD TV
Stand
2. Then push until stand into the LCD TV’s stand socket.
English
Part I: Quick Start Guide 5
5. Disconnecting the base and arm
1. Cover an even stable surface with a soft cloth. Place the LCD Display unit face down
on the cloth. Fit the stand onto the bottom of the LCD Display unit as shown:
2. Push inward the two inserts located under the stand base of the LCD Display, as
shown above by (2), to take the inserts apart from the base.
3. Remove the base from the arm, as shown above by (3).
4. Pull the hinge cover on the arm upward to remove it, as shown above by (4).
5. Remove the 4 screws from the hinge, then pull off the arm slowly, as shown below by
(5).
6. Removal of the arm from the stand base completed.
English
6 Part I: Quick Start Guide
7. Connect the antenna cable
Connect the TV antenna cable from your TV antenna system or Cable TV (CATV) to the
TV IN on the back of your TV. Check and make sure that the cable connections are firmly
in place.
6. Adjust the viewing angle
This display is equipped with a adjustable base. If necessary, turn the display screen to an
appropriate angle (maximum 20 degrees up and down) for more comfortable viewing.
Poor signal receiption by the antenna will result in poor picture and/or sound quality on your TV.
To get the best quality picture and sound, an outdoor TV antenna system that is properly aligned
will be required. Please consult with an antenna specialist for the requirement.
This TV has a built-in analog TV tuner, which allows the connection from a traditional analog TV
antenna system. To receive digital TV programs, you will need to connect your TV to an external
digital TV tuner (decoder), or a digital set top box (STB).
English
Part I: Quick Start Guide 7
8. Connect the power cable
1. Locate the power cable from the packaging, and plug the appropriate end into the AC
IN socket on the rear of the TV (as illustrated below).
2. Connect the other end into an appropriate wall power outlet, and flip the main power
switch on the TV to the ON ( ) position. The TV will enter standby mode and the
power indicator (on the front lower right) will light up red.
The type of power cable plug and socket illustrated may differ from the type used in your region.
Only use an appropriate power cable for your region. Never use a power cable which appears
damaged or frayed. Never change the plug type on a power cable. Be aware of total loading when
using extension cords or multiple outlet power boards.
WARNING:
This TV has been engineered and manufactured with the highest priority on safety, however,
IMPROPER HANDLING OR USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR
FIRE HAZARD. Please handle this TV with care. If damaged, turn off the power and unplug the
power cable from the TV. Transport the TV to your nearest BenQ authorised service centre for
repair.
Tabla de contenidos
Otros manuales de Televisor LCD de BenQ
BenQ
BenQ DV2680 Manual de usuario
BenQ
BenQ SC3211 Manual de usuario
BenQ
BenQ DV2680 Manual de usuario
BenQ
BenQ SE2241 Manual de usuario
BenQ
BenQ SJ4231 Manual de usuario
BenQ
BenQ MK2442 Manual
BenQ
BenQ H200:A Manual de usuario
BenQ
BenQ SE2241 Manual de usuario
BenQ
BenQ DV2050 Manual de usuario
BenQ
BenQ Q150 Manual de usuario
BenQ
BenQ VB3233 Manual de usuario
BenQ
BenQ V37X Manual de usuario
BenQ
BenQ ML2241 Manual de usuario
BenQ
BenQ VM2221 Manual de usuario
BenQ
BenQ MK2443 Manual de usuario
BenQ
BenQ MK2442 Manual de usuario
BenQ
BenQ SQ Series Manual de usuario
BenQ
BenQ DV2050 Manual de usuario
BenQ
BenQ VA261 Manual de usuario
BenQ
BenQ VL3735 Manual de usuario
