BENECOM BEM-100B Manual de usuario

BEM-100B/C User’s Manual

1st Ed – 17 March 2009

BEM-100B/C

2 BEM-100B/C User’s Manual

FCC Statement

FCC STATEMENT

THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS

SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING

INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS

FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.

THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST

HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A

COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN

RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN

ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL

INTERFERENCE TO RADIO COMMUNICATIONS.

OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE

HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO

CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

Notice

User’s Manual

BEM-100B/C Series User’s Manual

Notice:

This guide is designed for experienced users to setup the system within the shortest time.

For detailed information, please always refer to the electronic user's manual.

No part of this document may be reproduced, copied, translated, or transmitted in any form

or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

BEM-100B/C

4 BEM-100B/C User’s Manual

Disclaimer

Benecom co., Ltd. reserves the right to make changes, without notice, to any product,

including circuits and/or software described or contained in this manual in order to improve

design and/or performance. Benecom assumes no responsibility or liability for the use of

the described product(s), conveys no license or title under any patent, copyright, or masks

work rights to these products, and makes no representations or warranties that these

products are free from patent, copyright, or mask work right infringement, unless otherwise

specified. Applications that are described in this manual are for illustration purposes only.

Benecom makes no representation or warranty that such application will be suitable for the

specified use without further testing or modification.

User’s Manual

BEM-100B/C Series User’s Manual

Life Support Policy

Benecom PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE

SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL OF

Benecom.

As used herein:

1. Life support devices or systems are devices or systems which, (a) are

intended for surgical implant into body, or (b) support or sustain life and

whose failure to perform, when properly used in accordance with instructions

for use provided in the labeling, can be reasonably expected to result in

significant injury to the user.

2. A critical component is any component of a life support device or system

whose failure to perform can be reasonably expected to cause the failure of

the life support device or system, or to affect its safety or effectiveness.

A Message to the Customer

Benecom Customer Services

Each and every Benecom’s product is built to the most exacting specifications to ensure

reliable performance in the harsh and demanding conditions typical of industrial

environments. Whether your new Benecom device is destined for the laboratory or the

factory floor, you can be assured that your product will provide the reliability and ease of

operation for which the name Benecom has come to be known.

Your satisfaction is our primary concern. Here is a guide to Benecom’s customer services.

To ensure you get the full benefit of our services, please follow the instructions below

carefully.

BEM-100B/C

6 BEM-100B/C User’s Manual

Technical Support

We want you to get the maximum performance from your products. So if you run into

technical difficulties, we are here to help. For the most frequently asked questions, you can

easily find answers in your product documentation. These answers are normally a lot more

detailed than the ones we can give over the phone. So please consult the user’s manual

first.

To receive the latest version of the user’s manual; please visit our Web site at:

http://www.benecom.co.kr/

If you still cannot find the answer, gather all the information or questions that apply to your

problem, and with the product close at hand, call your dealer. Our dealers are well trained

and ready to give you the support you need to get the most from your Benecom’s products.

In fact, most problems reported are minor and are able to be easily solved over the phone.

In addition, free technical support is available from Benecom’s engineers every business

day. We are always ready to give advice on application requirements or specific information

on the installation and operation of any of our products. Please do not hesitate to call or

e-mail us.

User’s Manual

BEM-100B/C Series User’s Manual

Product Warranty

Benecom warrants to you, the original purchaser, that each of its products will be free from

defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Benecom, or which have been subject to

misuse, abuse, accident or improper installation. Benecom assumes no liability under the

terms of this warranty as a consequence of such events. Because of Benecom’s high

quality-control standards and rigorous testing, most of our customers never need to use our

repair service. If any of Benecom’s products is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will be billed according

to the cost of replacement materials, service time, and freight. Please consult your dealer

for more details. If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU type and

speed, Benecom’s products model name, hardware & BIOS revision number, other

hardware and software used, etc.) Note anything abnormal and list any on-screen

messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your manual, product, and any

helpful information available.

3. If your product is diagnosed as defective, obtain an RMA (return material authorization)

number from your dealer. This allows us to process your good return more quickly.

4. Carefully pack the defective product, a complete Repair and Replacement Order Card

and a photocopy proof of purchase date (such as your sales receipt) in a shippable

container. A product returned without proof of the purchase date is not eligible for

warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid to your

dealer.

BEM-100B/C

8 BEM-100B/C User’s Manual

Contents

Notices..............................................................................................................................10

Safety information ...........................................................................................................11

About this guide ..............................................................................................................12

Typography......................................................................................................................13

BEM-100B specifications summary ...............................................................................14

1.1 Welcome!....................................................................................................................16

1.2 Package contents ......................................................................................................16

1.3 Special features .........................................................................................................17

1.3.1 Product highlights .....................................................................................................17

1.4 Before you proceed...................................................................................................19

1.5 Motherboard overview...............................................................................................20

1.5.1 Placement Direction..................................................................................................20

1.5.2 Screw Holes..............................................................................................................20

1.5.3 Motherboard Layout..................................................................................................21

1.6 System memory.........................................................................................................23

1.6.1 Overview...................................................................................................................23

1.6.2 Memory Configurations.............................................................................................23

1.6.3 Installing a DIMM......................................................................................................24

1.6.4 Removing a SO-DIMM..............................................................................................24

1.7 Expansion slots .........................................................................................................24

1.7.1 Installing an Expansion Card....................................................................................25

1.7.2 Configuring an Expansion Card................................................................................25

1.7.3 PCI slots ...................................................................................................................25

1.8 Jumpers......................................................................................................................26

1. Clear RTC RAM (CLRTC)..............................................................................................26

2. COM1 RI, +12V and +5V Power Select (JCOMPWR1, JCOMPWR2)...........................27

3. COM2 RI, +12V and +5V Power Select (JCOMPWR1, JCOMPWR2)...........................27

4. COM3 RI, +12V and +5V Power Select (JCOMPWR3, JCOMPWR4)...........................28

5. COM4 RI, +12V and +5V Power Select (JCOMPWR3, JCOMPWR4)...........................28

6. System Panel Connector (F_PANEL1)..........................................................................29

1.9 Connectors.................................................................................................................30

1.9.1 Rear panel connectors..............................................................................................30

1.9.2 Internal connectors ...................................................................................................31

1. Front panel audio connector (10-pin AAFP1).......................................................................................... 31

2. Serial Port connectors (9-pin COM3, COM4).......................................................................................... 33

User’s Manual

BEM-100B/C Series User’s Manual

3. CPU, Power and Chassis fan connectors (3-pin CHA_FAN).................................................................. 33

4. Digital Audio connector (4-1 pin SPDIF_OUT)........................................................................................ 34

5. USB connectors (10-1 pin USB45) ......................................................................................................... 35

6. Primary IDE connector (40-1 pin IDE1)................................................................................................... 36

7. Serial ATA connectors............................................................................................................................. 37

8. ATX power connectors (20-pin ATXPWR1)............................................................................................ 37

9. Audio Amplifier connectors (4-pin JAMP1) ............................................................................................. 38

10. SPI Connector (7-pin SPI_JP1) ............................................................................................................ 39

11. LCD Inverter Connector (5-pin JBLK)................................................................................................... 40

12. Digital IO Connector (12-pin JDIO)....................................................................................................... 40

13. LVDS Connector (40-pin JLVDS).......................................................................................................... 41

2.1 Managing and updating your BIOS .....................................................................44

2.1.1 Creating a bootable floppy disk ...........................................................................44

2.2 BIOS setup program..................................................................................................45

2.2.1 Legend Box .........................................................................................................46

2.2.2 List Box................................................................................................................46

2.2.3 Sub-menu............................................................................................................46

2.3 BIOS menu screen.....................................................................................................47

2.3.1 Standard CMOS Features...................................................................................48

2.3.2 Advanced BIOS Features....................................................................................50

2.3.3 Advanced Chipset Features ................................................................................56

2.3.4 Integrated Peripherals.........................................................................................58

2.3.5 Security Chip Configuration.................................................................................63

2.3.6 Power Management Setup..................................................................................64

2.3.7 PnP/PCI Configurations.......................................................................................66

2.3.8 PC Health Status.................................................................................................67

2.3.9 Frequency/Voltage Control..................................................................................68

2.3.10 Load Optimized Defaults .....................................................................................69

2.3.11 Set Supervisor Password ....................................................................................70

2.3.12 Set User Password..............................................................................................71

2.3.13 Save & Exit Setup................................................................................................72

2.3.14 Exit Without Saving .............................................................................................73

BEM-100B/C

10 BEM-100B/C User’s Manual

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

yThis device may not cause harmful interference, and

yThis device must accept any interference received including interference that may

cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with manufacturer’s instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If his equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

yReorient or relocate the receiving antenna.

yIncrease the separation between the equipment and receiver.

yConnect the equipment to an outlet on a circuit different from that to which the receiver

is connected.

yConsult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the

graphics card is required to assure compliance with FCC

regulations. Changes or modifications to this unit not expressly

approved by the party responsible for compliance could void the

user’s authority to operate this equipment.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from

digital apparatus set out in the Radio Interference Regulations of the Canadian Department

of Communications.

This class B digital apparatus complies with Canadian ICES-003.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de BENECOM

BENECOM

BENECOM BEM-100Q Manual de usuario

BENECOM

BENECOM BEM-100BYT2 Manual de usuario

BENECOM

BENECOM BEM-100F Manual de usuario

BENECOM

BENECOM BNC-152 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario