Benchmark 1345-300 Manual de usuario

Call us on our toll-free customer support line:

1-866-349-8665 (Monday through Friday 9am –5pm

Eastern Standard Time)

Technical questions

Replacement parts

Parts missing from package

PORTABLE BAND SAW

•

PORTABLE BAND SAW



Do not operate this tool with a worn or dull blade.



If any part is missing, bent or broken in any way, or if any electrical parts do not work properly, unplug the Bandsaw. Replace

damaged or missing parts before using the Bandsaw again. NEVER use a tool that is defective or operating abnormally.

Make sure the blade teeth point downward.

Ensure the blade guides are properly adjusted.

Turn the tool OFF if the tool is to be backed out of an uncompleted cut.

Before starting your cut, watch the saw while it runs. If it makes an unfamiliar noise or vibrates excessively, stop immediately.

Turn the Bandsaw off and unplug. Do not restart until you have found and corrected the problem.

Let the blade reach full speed before cutting.

Cut only one workpiece at a time.

Wear suitable work gloves to reduce the vibration effects during use.

PORTABLE BAND SAW



N/cm²

.../min

Min

Off position

~ or AC

This symbol designates that this tool is listed with Canadian and U.S.

requirements by ETL Testing Laboratories, Inc.

Conforms to UL STD. 60745-1 and 60745-2-20

Certified to CSA STD C222 No 60745-1 and 60745-2-20

PORTABLE BAND SAW

ELECTRICAL INFORMATION

The bandsaw is ready to run for 120V operation. This Bandsaw Is double insulated which means there are two

systems of insulation, instead of grounding. This means that no grounding is provided on a double-insulated

appliance, nor should a means for grounding be added. Servicing a double-insulated bandsaw requires extreme

care and knowledge of the system and should be done only by qualified service personnel. Replacement parts for

a double-insulated bandsaw must be identical to the parts they replace. The double-insulated bandsaw is marked

with the words "DOUBLE INSULATED" and the symbol may also be marked on the tool.

Tabla de contenidos

Otros manuales de Sierra de Benchmark

Benchmark

Benchmark 1347-006 Manual de usuario

Benchmark

Benchmark 1347-100 Manual de usuario

Benchmark

Benchmark 1347-005 Manual de usuario

Benchmark

Benchmark 1270-205 Manual de usuario

Benchmark

Benchmark 1265-002 Manual de usuario

Benchmark

Benchmark 1270-001 Manual de usuario

Benchmark

Benchmark 1270-204 Manual de usuario

Benchmark

Benchmark 1347-001 Manual de usuario

Benchmark

Benchmark 1265-001 Manual de usuario

Benchmark

Benchmark 1265-000 Manual de usuario

Manuales populares de Sierra de otras marcas

RIDGID

RIDGID BS1400 Manual de usuario

ATIKA

ATIKA BWS 400-2 Manual de usuario

RGC

RGC FS20 Manual de usuario

Makita

Makita M2300 Manual de usuario

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manual de usuario

IMET Spa

IMET Spa SIRIO 370 AF-E Manual de usuario

Optimum

Optimum OPTisaw CS 275 Manual de usuario

Makita

Makita BPB180 Manual de usuario

Stihl

Stihl MS 462 C-M Manual de usuario

AEG

AEG TS 250 K Manual de usuario

Meec tools

Meec tools 004665 Manual de usuario

Makita

Makita LS1018L Manual de usuario

Ryobi

Ryobi RCS1400 Manual de usuario

DeWalt

DeWalt DCS391 Manual de usuario

Sealey

Sealey SA72 Manual de usuario

skilsaw

skilsaw SPT88 Instrucciones de montaje

Urrea

Urrea SI810 Dimensiones y guía de instalación

EINHELL

EINHELL BKG 210/1 Manual de usuario