Bematech LV4000U Manual de usuario
LV4000U LCD Pole Display
2
Contents
Warning..................................................................................... 3
FCC Warning Statement ........................................................... 3
Introduction.............................................................................. 4
Features......................................................................................4
Unpacking the display..............................................................4
Installation ............................................................................... 5
Assembly.....................................................................................5
Control Buttons.........................................................................5
Driver Installation Guide .......................................................... 6
Trouble Shooting....................................................................... 14
Mechanical Dimensions ............................................................ 16
Specification ............................................................................. 17
3
Warning
It will cause malfunction if the monitor is operating with incorrect power voltage. Do
not exposure this unit in the rain or moisture environment to reduce the risk of fire or
electric shock.
FCC Warning Statement
Note:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
» -Reorient or relocate the receiving antenna.
» Increase the separation between the equipment and receiver.
» Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
» Consult the dealer or an experienced radio/TV technician for help.
Notice:
1.
An Unshielded-type power cord is required in order to meet FCC emission limits
and also to prevent interference to the nearby radio and television reception. It
is essential that only the supplied power cord is used.
2.
Use only shielded cables to connect I/O devices to this equipment.
3.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
4
Introduction
Bematech LV4000U is a true flat LCD customer display with compact and ecological
design. The power consumption is only 2.5W with LED backlight. It can be used for
delivering multi-media messages and transaction information at the same time.
1. Features
a. 8” LCD display with LED backlight
b. Optimal display resolution 800 * 600
c. No ventilation hole design
d. Light weight, only 1.5lb physically for display without the pole and base.
e. VESA 75 * 75 mm wall mount standard
f. True flat panel screen
2. Unpacking the display
a. Put the monitor on a clean surface; make sure the box in upright position.
b. Remove packing materials from inside of box.
Accessories
Please make sure all accessories are included:
Accessories
Options
USB Cable
Driver CD
5
Installation
Assembly
1. Remove the four screws on base metal plate.
2. Pass the USB cable through the base from bottom.
3. Pass the USB cable through the pole from the bottom.
4. Reinstall the metal plate and attach the pole onto the stand base.
5. Pass USB cable through the hinge cover.
6. Plug the USB cable to the monitor.
7. Attached the hinge cover to the monitor with four screws.
8. Install monitor module to pole.
9. Installation complete.
Control Buttons
UP / DOWN key：When adjustment item is selected, the two keys are defined to
decrease or increase the value of brightness.
6
Driver Installation Guide
PC requirements
USB Monitor software can be used on PCs, from Netbooks, Notebooks/Laptops to
Desktops. The driver will run on processors ranging from Atom N270 based PCs, basic
single Core CPUs, and the latest Dual, Quad Core and Core i3/i5/i7 CPUs.
The performance of the software is dependent upon the processing power available, as
well as the Operating system in use. More capable systems offer higher performance.
DisplayLink software is available for PCs running one of the following Windows
Operating Systems:
Windows 7 (32-bit or 64-bit)
Windows Vista with Service Pack 1 or 2 (32-bit or 64-bit)
Windows XP Home or Professional (including Tablet edition) with Service Pack 2
or 3
Windows 2000 with Service Pack 4
Note: 64-bit editions of XP are not supported. No Windows Server editions are
supported. Mac OS X support can be found at http://www.displaylink.com/mac
Recommended system requirements
Windows 7 / Vista
The Windows Experience Index (WEI) is a useful measure of hardware level. The WEI is
accessible from Computer > Properties, or from Control Panel > System.
The recommended typical hardware requirements for the PC are:
1. WEI score of at least 3 in the ‘Graphics; Desktop performance for Windows Aero’
category.
2. Overall WEI score of at least 3 as recommended by Microsoft.
3. At least one USB 2.0 port.
4. 30 megabytes (MB) of free disk space.
5. Computer screen for use with the DisplayLink device, if it is not integrated.
6. Network access for software downloads, or access to a CD-ROM drive.
If the PC specification is below this, performance will be lower (or CPU loading higher
than acceptable).
Windows XP/2000
1. For 1-2 monitors, business usage, productivity target. This may not provide full
frame rate DVD playback at full screen.
7
a. 1.2GHz Single Core CPU
b. 512MB memory
2. For 3 monitors where 1 could run DVD video while also targeting productivity
and business apps. Will support only 1 video of DVD resolution at full screen:
a. 1.6GHz CPU
b. 1GB memory
3. For 6 screens where 1 screen can run full screen DVD video:
a. 1.8GHz Core Duo
b. 1GB memory
c. At least one USB 2.0 port.
d. 30 megabytes (MB) of free disk space.
e. Computer screen for use with the DisplayLink device, if it is not integrated.
f. Network access for software downloads, or access to a CD-ROM drive.
Graphics Card Support (Windows Vista/Windows 7)
On Windows Vista and Windows 7, DisplayLink software interacts closely with the
primary graphics card. DisplayLink support and test a single graphics card (GPU)
installed in a PC. All major GPU vendors Intel, ATI, NVidi and Via.
Issues may be found with PCs with multiple graphics cards, or other graphics card
combinations, and DisplayLink software. The following documents the combinations
of testing and known configuration support.
Vista/Windows 7 on version 5.2
Switchable Graphics (ATI/Intel)
Untested on Vista may be used at user’s own risk
On Windows 7 unsupported
Hybrid Graphics / Hybrid SLi / Hybrid Crossfire
Unsupported
SLi machine in SLi mode:
Untested on Vista may be used at user’s own risk
On Windows 7 unsupported
SLi machine in non-SLi mode (i.e. with 2 or more identical GPUs):
Unsupported
Crossfire
Unsupported
Other machines with 2 GPUs where only 1 is active at once –reboot needed to switch
Supported
8
Graphics Card Support (Windows 2000/XP)
All graphics cards are supported on Windows 2000/XP.
Supported Languages
Unsupported languages default to English. The following languages are supported in
version 5.2, on all supported operating systems:
Arabic
Bahasa Indonesian
Bulgarian
Chinese (Traditional)
Chinese (Simplified)
Croatian
Czech
Danish
Dutch
English
Finnish
French
Greek
German
Hungarian
Italian
Japanese
Korean
Norwegian
Polish
Portuguese
Russian
Slovak
Slovenian
Spanish
Swedish
Turkish
9
Installing the USB Monitor Software
1. Insert CD into the CD-ROM drive. Click "USB Monitor Driver"
2. Click "I Accept".
3. The progress window appears, as shown in the figure below.
4. If you connect your USB monitor to your PC, it recognizes the monitor and the
"Found New Hardware" wizard is displayed, as shown in the figure below.
When setup is finished, a monitor icon is created in the system tray at the bottom
of the monitor screen, and the information for the installed USB monitor is
displayed.
» Make sure to connect the USB cable and begin the installation after your
PC has booted.
» The Setup program requires about one minute for the installation. If you
turn the power off or remove the USB cable while the Setup program is
running, it may cause an error with the PC or the Windows operating
system.
» The optimal resolution for this USB monitor is 800 x 600.
10
5. When the installation is completed, configure the following settings to use
multiple monitors.
a. Right-click on the “Windows Desktop” and select “Properties” from the
displayed menu. The “Display Properties” window appears.
b. Select the “Settings” tab. A list of connected USB monitors is displayed.
c. Arrange the monitors displayed in the 'Display Properties' window in the order
they are actually used.
d. Then click "OK" button.
Tabla de contenidos
Otros manuales de Monitor de Bematech
