Bematech I-500 Instrucciones de funcionamiento
Advanced Handheld High-Speed Laser Scanner
1
2D Imaging
Barcode Scanner
Programming Guide
I-500
I-500 Imaging Barcode Scanner
i
PROGRAMMING GUIDE
Important Notice
No warranty of any kind is made in regard to this material, including, but not limited to,
implied warranties of merchantability or fitness for any particular purpose. We are not
liable for any errors contained herein nor for incidental or consequential damages in
connection with furnishing, performance or use of this material. We shall be under no
liability in respect of any defect arising from fair wear and tear, willful damage,
negligence, abnormal working conditions, failure to follow the instructions and warnings,
or misuse or alteration or repair of the products without written approval. No part of this
document may be reproduced, transmitted, stored in a retrieval system, transcribed, or
translated into any human or computer or other language in any form or by any means
electronic, mechanical, magnetic, optical, chemical, biological, manual or otherwise,
except for brief passages which may be quoted for purposes of scholastic or literary
review, without express written consent and authorization. We reserve the right to make
changes in product design without reservation and without notification. The material in
this guide is for information only and is subject to change without notice. All trademarks
mentioned herein, registered or otherwise, are the properties of their various, ill,
assorted owners.
General Handling Precautions
Do not dispose the scanner in fire.
Do not put the scanner directly in the sun or by any heat source.
Do not use or store the scanner in a very humid place.
Do not drop the scanner or allow it to collide violently with other objects.
Do not take the scanner apart without authorization
Guidance for Printing
This manual is in A5 size. Please double check your printer setting before printing it out.
When the barcodes are to be printed out for programming, the use of a high-resolution
laser printer is strongly suggested for the best scan result.
Copyright © 2018. All rights reserved.
I-500 Imaging Barcode Scanner
ii
PROGRAMMING GUIDE
Table of Contents
Important Notice ................................................................................... i
General Handling Precautions ............................................................................................ i
Guidance for Printing.......................................................................................................... i
Using the Scanner ................................................................................. 1
Settings and Programming .................................................................... 2
Enabling and Disabling Programming Operation ...............................................................2
User Preferences.....................................................................................................3
Show Version .....................................................................................................................3
System Settings..................................................................................................................3
User Default Settings .........................................................................................................4
Scan Mode.........................................................................................................................5
Scan Timeout.....................................................................................................................6
Scan Interval ......................................................................................................................7
Same Code Delay Time Mode ...........................................................................................8
Same Code Delay Time Selection ......................................................................................8
Interface Switch.................................................................................................................9
Access Period of USB Keyboard .........................................................................................9
Speed of USB HID Keyboard Data ....................................................................................10
Good Read Beep Setting ..................................................................................................10
Good Read Beep Frequency ............................................................................................11
Good Read Beep Length ..................................................................................................11
Aiming Pattern.................................................................................................................12
Illumination .....................................................................................................................12
Country Code...................................................................................................................13
Readable Barcode Symbologies ............................................................................15
All Symbologies................................................................................................................15
EAN/UPC..........................................................................................................................16
Code 128 .........................................................................................................................18
Code 39 ...........................................................................................................................18
Code 93 ...........................................................................................................................19
Code 32 ...........................................................................................................................19
Code 11 ...........................................................................................................................20
Codabar ...........................................................................................................................20
Interleaved 2 of 5.............................................................................................................21
Matrix 2 of 5 ....................................................................................................................21
Industrial 2 of 5................................................................................................................22
PDF417 ............................................................................................................................22
Micro PDF417 ..................................................................................................................23
Data Matrix......................................................................................................................23
QR Code...........................................................................................................................24
I-500 Imaging Barcode Scanner
iii
PROGRAMMING GUIDE
GS1-DataBar ....................................................................................................................24
Aztec................................................................................................................................25
Codablock F .....................................................................................................................25
Data Editing ..........................................................................................................26
Prefix ...............................................................................................................................26
Suffix................................................................................................................................28
Code Identifiers ...............................................................................................................29
Data Terminator Character ..............................................................................................34
Data segment extraction .................................................................................................34
Read Fail Message ........................................................................................................... 37
Appendix ..............................................................................................................38
Appendix A: ASCII Code Table..........................................................................................38
Appendix B: Data Codes ..................................................................................................42
Appendix C: Data Code Editing ........................................................................................44
I-500 Imaging Barcode Scanner
1
PROGRAMMING GUIDE
Using the Scanner
1. Ensure that the scanner is connected to the host computer correctly.
2. Hold down the trigger button to activate the red aiming line and the white
illumination pattern. The illumination pattern is used to illuminate the barcode. The
aiming line is used to aim at the barcode and help to find the best reading distance.
Keep red aiming line in the center of a bar code.
3. On a successful scan, there’ll be a beep sound, illumination & aiming pattern will turn
off. The scanner then transmits barcode message to the host computer.
NOTE: After scanning the same barcode a few times, it will be able to find a certain
scanning distance range with higher successful reading rate. This range is the optimum
reading distance.
I-500 Imaging Barcode Scanner
2
PROGRAMMING GUIDE
Settings and Programming
Scan selected barcodes in this manual to perform setup and programming of the
handheld imaging barcode scanner. Decoding options and interface protocols can be
tailored to a specific application.
Setup parameters are stored in non-volatile memory in the scanner and are retained
even when power is off. Setup parameters change only when you reset them. You may
need to hide adjacent code patches with your hand when scanning.
Enabling and Disabling Programming Operation
Programming operation can be enabled or disabled by scanning the following barcodes.
Factory default is to have programming enabled.
Enable programming
Disable programming
I-500 Imaging Barcode Scanner
3
PROGRAMMING GUIDE
User Preferences
Show Version
Scan this barcode to display firmware version.
Read device firmware version
System Settings
Scan this barcode to return all parameters to the factory default values.
Factory default settings
I-500 Imaging Barcode Scanner
4
PROGRAMMING GUIDE
User Default Settings
In addition to the factory settings, users can also save their frequently used configuration
as the user default settings. By scanning the “Save current settings as user default"
barcode, the current configuration information of the device can be saved as the user
default settings information. If there is user default setting information in the scanner,
the new configuration information will replace the original user default setting
information after the operation.
By scanning "Restore user default settings", the reader module can be restored to user
default settings last saved.
Scan barcodes below to set or delete customer’s factory default.
Save current settings as user default
Restore user default settings
Tabla de contenidos
Otros manuales de Lector de código de barras de Bematech
Bematech
Bematech S302D Instrucciones de funcionamiento
Bematech
Bematech BR-310 Manual de usuario
Bematech
Bematech D-6448 Manual de usuario
Bematech
Bematech I-150 Manual de usuario
Bematech
Bematech BR800BT Manual de usuario
Bematech
Bematech I-150 Instrucciones de funcionamiento
Bematech
Bematech S303D Instrucciones de funcionamiento
Bematech
Bematech D-6448 Manual de usuario
Bematech
Bematech Aquila S-100 Manual de usuario
Bematech
Bematech BR-2008T Manual de usuario
