Bem EXO-110 Manual de usuario
EXO-110 Bluetooth Headband
®
4 Product Overview
7 Getting Started
9 Operation Details
12 Troubleshooting
13 Washing Instructions
14 Specications
16 FCC Statement
18 Safety Instructions
19 Warranty
Contents
4
Thanks for purchasing the bem wireless EXO Active Gear
Headband! This headband is Bluetooth ready, moisture wearing,
and comfortable to wear. Better yet, it’s sweat-proof and water
resistant, making it great for listening to music on a run or
simply taking a call when you’re out and about. But to make
sure you get the best possible results from your new EXO Active
Gear Headband, please thoroughly read and carefully follow
all instructions in this User Guide. This short guide explains
everything you need to know to start using your EXO Active Gear
Headband.
Please keep this User Guide in a convenient location for future
reference and visit bemwireless.com for additional information.
Product Overview
5
Product Overview (cont)
The bēm wireless EXO Active Gear Headband combines the
convenience of Bluetooth with the comfort of a headband. Simply
pair your headband with your Bluetooth enabled device and enjoy
hands-free, wireless performance at home or on the go.
Package Contents
Your EXO Active Gear Headband should include:
EXO Active Gear Headband x 1
Micro USB Charging Cable x 1
User Guide x 1
If any items are missing or damaged, please call bēm
wireless customer support at 1-855-839-8616 or email
6
Meet Your EXO
Active Gear Headband
1. Control Panel
2. Mic
3. LED Indicator
4. Volume Down / Play Previous
5. Multifunction (Power / Pairing / Play or
Pause / Answer or End Call / Redial)
1
23
4 5 6
7
8
6. Micro USB Port
7. Speaker
8. Micro USB Port
7
Getting Started
We know you’re excited to experience your new EXO Active Gear
Headband. And you should be. Luckily, these three easy steps will
get you up and running quickly.
Step 1: Charge It
Remove the control panel from the headband by easing the unit
out of its pocket and toward the opening near the back of the
headband until you can remove it fully. Connect your EXO Active
Gear Headband to a PC/laptop using the Micro USB charging
cable. The LED Indicator will light red during charging and the
LED Indicator will turn off when your headband is fully charged.
Please allow approximately 2.5 hours to fully charge. Insert the
control panel back into the headband using the same easing
method used to remove the unit.
Step 2: Connect it
Single Connection
When your EXO Active Gear Headband is fully charged, pair it with
your smartphone or other Bluetooth enabled device. This connection
allows you to make calls on your smartphone or listen to music from
your device.
• With the headband turned off, press and hold the
MULTIFUNCTION button for approximately 5 seconds until
the LED indicator ashes red and blue alternately.
8
• Activate the Bluetooth settings on your smartphone or
other Bluetooth enabled device (refer to your device user
guide for details). Your smartphone/device will now begin
searching for other Bluetooth devices.
• When your smartphone/device nishes searching, select
“EXO Headband” from the device list. When connected, the
LED Indicator will begin to ash blue once every 5 seconds
and a beep will sound.
To connect your Bluetooth headband with your device after initial
pairing (when the headband has been turned off), press and hold the
MULTIFUNCTION button for approximately 3 seconds. A two-tone
chime will sound and the LED Indicator will begin ashing blue. The
headband will search for previously paired devices and automatically
connect. When connected, the LED Indicator with begin to ash blue
once every 5 seconds and a beep will sound.*
*Bluetooth must be activated on your smartphone or other Bluetooth
enabled device
Step 3: Fit it
Wear the headband as you normally would, but be sure to position the
speakers over your ears. Enjoy!
9
The below instructions will help you get the most use out of your EXO
Active Gear Headband.
Power On
After establishing an initial connection with a Bluetooth device, press and
hold the MULTIFUNCTION button for approximately 3 seconds to turn
on your EXO Active Gear Headband. A two-tone chime will sound and
the LED Indicator will begin ashing blue. The headband will search for
previously paired devices and automatically connect.*
*Bluetooth must be activated on your smartphone or other Bluetooth
enabled device.
Power Off
To turn off your headband, simply press and hold the MULTIFUNCTION
button for approximately 3 seconds until the LED Indicator ashes red
and a dual-tone chime sounds. This WILL NOT turn off the Bluetooth
feature on your smartphone or other Bluetooth enabled device.
Operation Details
10
Volume Control
Follow the below instructions to adjust the volume while music is
playing or a call is in progress.
1. On your headband: While music is playing or a call is in progress,
press and hold the VOLUME UP or VOLUME DOWN buttons to adjust
the volume.
2. On your device: Adjust the volume of your music / phone call as you
normally would.
NOTE:
• Maximum Volume: A double beep will sound to indicate that
the headband is as loud as possible.
• Minimum Volume: The headband will stop producing sound
until the volume is increased again, but the headband will
remain on and the music will continue to play.
Music Operation
1. On your headband:
Pause/Play: To pause music that is playing, press the MULTIFUNCTION
button. Press the MULTIFUNCTION button again to resume the music.
Start the Current Song Over: To start the current song from the
beginning, press the VOLUME DOWN button.
Go to Previous Song (Skip Back): To skip back to the previous song,
Tabla de contenidos
