Beltone Direct Series Manual de usuario

Wireless accessories

Ftil

Qik

Gid

unc

ona

‐

GTO,January2011

Beltone Direct Line

Contents

Beltone Direct Line: Tests – General information 3

Beltone Direct Line: Wireless connections 5

Beltone Direct Remote Control - Pairing test 6

Beltone Direct Remote Control – Functional test 7

Beltone Direct TV Link – Pairing test 10

Beltone Direct TV Link – Streaming test 11

Beltone Direct TV Link – Alternative pairing as 2nd or 3rd channel 12

Beltone Direct Phone Link – General information 13

Blt

Di t

Ph Li k

Pii ithTRUEd i

one

rec

one

–

ng w

ith

TRUE

ces

Beltone Direct Phone Link (testing with a mobile phone) – Pairing test 15

Beltone Direct Phone Link (testing with a Bluetooth PC) – Pairing test 17

Beltone Direct Phone Link – Functional test 20

Beltone Airlink – Testing 21

FunctionalTest–QuickGuide|GlobalTechnicalOperation|Page2

Direct Line service test

Functionality test in Direct Line

These instructions are meant for a quick functional test of the Beltone Direct Line devices.

The

tests

performed

following

these

instructions

will

test

all

functions

Direct

Line

accessory

both

The

tests

performed

following

these

instructions

will

test

all

functions

Direct

Line

accessory

both

electrically and electro-mechanical. The test is meant as a quick first hand evaluation in a service situation,

whether a Direct Line device is working as intended.

These instructions should not be read as a user guide. The Direct Line device has more features than described

in this guide. Please refer to the User Guides for detailed user instructions.

How to use the guide:

The guide is step by step instructions to be followed sequentially for each Direct Line device. By showing the

instruction on a Windows PC with sound card and Bluetooth functionality, the embedded sound files might be

used

audio

input

for

Direct

Line

and

Direct

Line

Phone

Link

tests

the

guide

used

printed

version

used

audio

input

for

Direct

Line

and

Direct

Line

Phone

Link

tests

the

guide

used

printed

version

then sound inputs for streamer and BTB test must be applied from another sound source and TRUE sound

samples cannot be heard.

The bullet points are either marked with which indicates that this is an instruction or an information for the

operator, or with which indentifies an actual check point.

Samples of sounds played by the TRUE devices can be heard by clicking the icon

By following the instruction step by step the functions will be tested with a minimum of operator actions.

Some test are described in multiple slides.

the

lower

right

corner

each

slide

placed

arrow

indication

the

test

sequence

finished

continued

the

lower

right

corner

each

slide

placed

arrow

indication

the

test

sequence

finished

continued

next slide.

The arrows contains hyperlinks, either going back to page 2 (Contents) or to continued test instructions

on the next slide.

FunctionalTest–QuickGuide|GlobalTechnicalOperation|Page3

Direct Line service test

Test structure:

Each device test consists of two parts, a pairing procedure and a function procedure. The pairing will ensure that

the transmitter and receiver part of the device is working correctly. The functional test will ensure that the electro-

mechanical

parts

switches

plugs

and

cables

are

working

correctly

recommended

run

both

parts

the

test

mechanical

parts

switches

plugs

and

cables

are

working

correctly

recommended

run

both

parts

the

test

for each device, even though they are separated in the table on contents.

Test conditions:

Make sure that there is nothing in the test environment thatcanhaveainfluenceonthe RF-transmission between

the

TRUE

devices

and

the

Direct

Line

devices

not

place

any

the

devices

metallic

tabletops

behind

the

TRUE

devices

and

the

Direct

Line

devices

not

place

any

the

devices

metallic

tabletops

behind

nearby metallic structures like steel wardrobes.

Some of the tests requires a certain distance between the TRUE and Direct Line devices. To get an indication of

the transmitting power being sufficient, it is important to observe that these distances are kept, and that the space

between the devices is free of obstructions.

Re-setting a TRUE device used for testing Direct Line.

To ensure that all pairing information are cleared from an TRUE devices it is recommended to run the device

through a test sequence on a DSA 6000 Final Device Test System.

Important notice!

Please notice that pairing of TRUE hearing devices with any Beltone Direct Line device will overwrite any prior

pairing information. In a service situation it means that if a Direct Line accessory device has been tested using a

local set of TRUE hearing devices – all pairings of customers Hearing devices and accessories must be

reestablished

important

that

this

information

customers/dispensers

might

otherwise

interpreted

reestablished

important

that

this

information

customers/dispensers

might

otherwise

interpreted

as a defective device being returned.

If the customer’s TRUE devices are available for the test, the pairing test might be omitted.

FunctionalTest–QuickGuide|GlobalTechnicalOperation|Page4

Direct Line wireless connections

BeltoneTRUE™

AirlinkTM

BeltoneDirect Line

PhoneLink

BeltoneSolusPro®

fittin

software

BeltoneDirectLineTVLink BeltoneDirect Line

Remote Control

Mobilephone

Cable connection

2.4GHz wireless connection

TVAudio systemComputer

Bluetooth connection

FunctionalTest–QuickGuide|GlobalTechnicalOperation|Page5

Remote Control

–

art 1

(

Pairin

p( g)

Equipment used in this test:

1 TRUE device programmed for Right side

1 TRUE device programmed for Left side

Optional – 1 Direct Line TV Link (SAS).

1. Put the Remote Control in pairing mode.

DO NOT

switch TRUE devices on yet

The SAS is not necessary for checking the functionality of the Remote Control. If a

SAS is used for this test it needs to be paired with the TRUE devices prior to this

test.

•

NOT

switch

TRUE

devices

yet

• Remove battery cover on Remote Control

• Press the pairing button using a point instrument.

• Check that Remote Control display switch to pairing mode.

•

Pairing mode will be active for 20 seconds

Pairing button.

•

Pairing

mode

will

active

for

seconds

2. While Remote Control is in pairing mode

switch on both TRUE devices. Sound sample:

Delayed Activation

Searching for devices.

• TRUE devices will play the Delayed Activation sound

• When each of the devices has been detected, the TRUE devices will

play the Pairing Complete tune.

• A delay between the two paring functions can be

Sound sample:

Pairing Complete

experienced. When one side is paired the search

for the other side will continue.

• Check that Remote Control display show:

Both sides connected Left side connected.

Searching for right side Both sides connected.

FunctionalTest–QuickGuide|GlobalTechnicalOperation|Page6

Remote Control

–

art 2

(

Functional Test

)

1. With the devices connected, check the buttons on

Remote Control.

p( )

Remote

Control.

• If the Remote Control is in stand by mode (Display not lid), pressing any button

will bring it to active mode, but will not perform the function of the button.

• For the following tests move Remote Control approximately 150 cm away from

TRUE devices.

2. Press Program button once.

• TRUE devices will play Preset2 sound.

• Until communication between Remote Control and TRUE devices is complete,

the volume bar will be light blue

the

volume

bar

will

light

blue

• The display will show the preset name set entered into TRUE devices by the

SolusPro fitting SW.

• Check that Remote Control changes the display to Preset 2.

Right side :

finished

3. Multi function button test:

• The multi function button on the Remote Control is used for:

: turning volume up

: turning volume down

Right

side

finished

Left side: on-going.

Sound sample:

Pairing Complete

turning

volume

down

: Selecting left side TRUE device only

: Selecting right side TRUE device only

FunctionalTest–QuickGuide|GlobalTechnicalOperation|Page7

Remote Control – part 2 (Functional Test)

3a. Press Left button .

The Remote Control will now only adjust the Left side TRUE device.

Fig 3a.

The Right side setting will still be displayed and the device is still connected.

Check that the display has changed to Fig. 3a

3b. Press Plus button a cou

le o

times.

Right side : No adjust.

Left side: Adjusted

Fig 3b.

The Remote Control will turn up the volume in the Left side TRUE only.

Check that the Left side TRUE turns volume up.

The Right side TRUE should not be affected. Turn up volume in left

side TRUE.

3c. Press Right button twice.

The first press will bring back dual side control.

The second press: Remote Control will only adjust the Right side TRUE device.

Fig 3c.

The Left side setting will still be displayed and device is still connected.

Check that the display has changed to Fig 3c.

3d. Press Minus button a couple of times.

Right side : Adjusted

Left side: No adjust.

Fig 3d.

The Remote Control will turn volume down in the Right side TRUE only.

Check that the Right side TRUE volume is turned down.

The Left side TRUE should not be affected. Turn up volume in left

side TRUE.

FunctionalTest–QuickGuide|GlobalTechnicalOperation|Page8

Remote Control – part 2 (Functional Test)

4. Press Home button .

Pressing the Home button will:

Sound sample:

Preset 1

•

ctivate preset 1 in both hearing instruments and play preset 1 sound.

• Adjust both hearing instruments to default volume settings

• Set volume to simultaneous adjustment mode

Check that the Display changes back to default setting

Sound sample:

SAS search

5. Press Direct Line TV button

(

SAS

)

TRUE devices will play SAS search sound

TRUE device will go quiet and start search for a SAS

Check that the Remote Control dis

chan

e to Direct Line search screen. Searching for SAS

py g

If no SAS is found devices will switch back to the setting it came from.

If a SAS is found the display will show the Direct Line TV screen.

NOTE ! For TRUE devices to find the SAS they need to be paired to the SAS.

Connected

to SAS

6. Activate Ke

Lock switch.

Slide switch upwards to lock

Check that display shows Lock-symbol

wnw

k R

ntr

Connected

SAS

S de do a ds o u oc e o e Co o

End of test. Key lock activated

Key Lock switch

FunctionalTest–QuickGuide|GlobalTechnicalOperation|Page9

TV Link – part 1 (Pairing)

Equipment used in this test:

1 TRUE device programmed for Right side

1 TRUE device programmed for Left side

Headphone output on PC.

Optional

1 Direct Line Remote Control.

Optional

Direct

Line

Remote

Control.

The Remote Control is not necessary for checking the functionality of the SAS. If a Remote

Control is used for this test it needs to be paired with the TRUE devices prior to this test.

1. Pre

are for

airin

of TRUE devices with SAS.

ppg

•DONOTswitch the TRUE devices on yet.

• Connect the SAS to wall socket using the Power Supply.

• Check that the Green Power light switches on.

• Press the pairing button in SAS

Green light: Power on

Amber light: Pairing mode on

Small amber light: Channel 1

• Check that the amber Activity light is switched on.

• Check that the amber light for Channel 1 switches on.

• Pairing mode will be active for 20 seconds.

Whil th SAS i i i i d it h b th TRUE

Sound sample:

Delayed Activation

Whil

SAS

n pa

e, sw

TRUE

devices.

• The TRUE devices will play the Delayed Activation sound.

• Check that all three channel indicators switch on for a short period.

Cf f

Sound sample:

Pairing Complete

•

heck that each o

the TRUE devices are

ound indicated by Pairing

omplete

tune played by each TRUE device..

• Channel 1 light will flash for the reminder of the pairing mode period.

FunctionalTest–QuickGuide|GlobalTechnicalOperation|Page10

Manuales populares de Mando a distancia de otras marcas

Panasonic

Panasonic EUR7622KB0 Manual de usuario

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación