Bell and Howell DV200HD Manual de usuario
0
1
2
Preface
Preface
Preface
Preface
Thank you for purchasing this digital video camera. Please carefully read through this
manual before using, and properly keep it for future reference .
This manual was compiled based on updated information while preparing. The screen
display and illustration adopted in this manual are for describing operation in more details
and more visually.
Instructions
Instructions
Instructions
Instructions
Please run the video camera in the following steps.
Attention: If to use the new memory card or memory card used on other digital
camera/video camera on this video camera, please firstly format it on this video
camera. Please make backup of important data on other media before formatting,
e.g. floppy disk, hard disk, CD, etc.
Connect to the computer
Check the power supply
of the video camera
Insert and format the
memory card
Recording / picture taking
Install the driver
3
Notice
Notice
Notice
Notice to
to
to
to Users
Users
Users
Users
This video camera supports SD memory card and MMC card (multimedia memory card).
There is a write-protection switch on the SD memory card to avoid deleting or formatting
image document.
Push the switch on SD memory card to the bottom to have data protected. If to push the
switch on the SD memory card to the top, write-protection will be off. Before taking
photo, please push the switch on SD memory card to the top.
Instructions for Using Memory Card
●In case of using the memory card for the first time, or failing in recognizing data in
the memory card by the video camera or images taken with other video cameras, please
make sure to firstly format the memory card.
●Please power off the video camera before inserting or taking out the memory card.
●After various times of using, performance of the memory card will be lowered. In
case of lowered performance, a new memory card is needed.
●The memory card is precise electronic device. Pleas do not bend the memory card,
and keep it away from dropping or heavy load on it.
●Please keep the memory card away from the environment with strong electric field or
magnetic field , e.g. loudspeaker or TV receiver .
Metal Pin of memory card
Write-protection switch
4
●Please do not use or keep the memory card in extremely hot or cold environment.
●Please keep the memory card clean and away from any liquid. In case of liquid on the
memory card, please clean it with a piece of soft cloth.
●When keeping the mommy card idle, please place it into the cover.
●Please note that the memory card will get hot after long-term use. It is normal.
●Please do not use the memory card used on other digital video camera or digital
camera. If to use the memory card on this machine, please firstly form it with this video
camera.
●Please do not use formatted memory card used on other digital video camera or
memory card reader.
●In case of one of the followings to the memory card, the recorded data may be
damaged:
- Improper use of the memory card;
- Power off or take out the memory card during recording, deleting (formatting) or
reading;
●It is recommended to make backup of important data on other media, e.g. floppy disk,
hard disk, CD, etc.
Video camera maintenance
In case of idle use, keep it in a dry and dark place, and it is a must to take the battery out.
●Keep wearing wrist strap on while using to prevent dropping down.
●Use a proper protective cover to prevent lens and display screen from scratching .
●If to clean the surface of lens, dust on the surface should be firstly blown off, and then
5
gently clean the lens with a piece of cloth or paper suitable for cleaning optical devices. If
needed, please use lens cleanser. Organic solution is strictly prohibited for leaning the
video camera.
●Do not touch lens surface with finger.
System
System
System
System requirements
requirements
requirements
requirements
While operating and using the digital video camera, please take minimum computer
system required by the video camera as reference . It is strongly recommended to use
better for operating the video camera for better effect. The minimum system requirements
are as below:
System requirements
Operating system Microsoft Windows 7 , 2000,
XP,
VISTA
CPU Intel PIII667 above or CPU with equivalent performance
EMS memory 512 MB above
Sound card, video card Sound card and video card support DirectX8 or higher version
CD-ROM Above 4 quad-speed
Hard Disk Minimum 1 GB free disk space
Others O ne standard USB 1.1 or USB 2.0 interface
Function
Function
Function
Function characteristics
characteristics
characteristics
characteristics
This video camera has various characteristics and functions:
Digital video camera
Digital camera
Mass Storage
（
Portable disk
）
PC Camera
（
Webcam
）
4 X digital zoom
6
Appearance
Appearance
Appearance
Appearance profile
profile
profile
profile
7
8
1.Zoom in key 2.Playback key 3.Zoom out key 4.AV interface
5.Mini-USB interface 6.Lanyard roller 7.Working indicator light 8.Power key
9.Left key 10.Up key 11.OK key 12.Right key 13.Down key 14.Speaker
15.Delete key 16.MODE key 17.MENU key 18.Shutter key 19.Microphone
20.Fill light 21.Timer light 22.Battery cover 23.Lens 24.Tripod socket 25.MicroSD
Camcorder
Camcorder
Camcorder
Camcorder Buttons
Buttons
Buttons
Buttons Function
Function
Function
Function and
and
and
and Indicators
Indicators
Indicators
Indicators
Buttons/ Indicators Function
Power Button Switches camcorder.
Shutter Button 1.Takes photo
2. Starts/stops recording.
Zoom Button Digital zoom, magnifies/reduces photos
（
in playback
mode
）
.
NENU Button Opens/exits the menu and stops playing. （in video
playback ）
MODE Button Switches between photo and video mode.
DISP Button Enters into screen half-off or full-off mode.
Playback Button Enters/Exits playback mode.
Up Button Menu selection. Removes the photo (when magnifying
photo).
Down Button Menu selection. Removes the photo (when magnifying
photo) and changes EV value in photo mode.
Left Button Selects file in the menu selection and removes the photo
(when magnifying photo).
Right Button Selects file in the menu selection, removes the photo
(when magnifying photo), or opens fill light.
OK Button Confirms and returns to the last menu; plays video or
9
stops playing.
Quick Deletion Button Enters into quick deletion mode.
Photo/Video Indicator Lights when taking photo/video, flashes when
camcorder switches on.
Charging Indicator Lights for a while when the power-off camcorder enters
into charging mode through its connection with charger.
Starting
Starting
Starting
Starting Use
Use
Use
Use
Installing
Installing
Installing
Installing Battery
Battery
Battery
Battery
This camcorder uses three AAA alkaline batteries or rechargeable original lithium
batteries. When replacing batteries, the camcorder power should be turned off.
Firstly open battery cover and put into batteries according to tip of positive and negative
polarity the in the battery box, and then close the cover.
Installing
Installing
Installing
Installing SD/MMC
SD/MMC
SD/MMC
SD/MMC Memory
Memory
Memory
Memory Card
Card
Card
Card
Open battery cover and insert the SD/MMC memory card with metal foots inwards
according to the tips besides card slot.
To
take out the SD/MMC memory card, please press it downwards and then pull it out.
────────────────────────────────────
Note ：
�
Turn off the camcorder power before card replacement.
�
Maintain the right direction when inserting the card. Don't push strongly,
otherwise the card or camcorder part would be damaged. If card can't be inserted, check
the direction.
�
Please format the memory card firstly if it is used for the first time or it has been used
in other camcorders.
────────────────────────────────────
Tabla de contenidos
