Belkin PureAV PF30 Manual de usuario
Home Theater Power Protection with PureFilter™ Technology
Power Console PF30
User Manual
Clear Picture Clean Sound
AP20800-10
PureAV Power Console
Table of Contents
1
Page
Introduction ......................................................................................... 2
Safety Precautions ............................................................................. 3
Package Contents ............................................................................... 4
Power Console Features .................................................................... 5
Hookup and Installation
Step 1 Mounting your Power
Console .................................................................... 6
Step 2 Connect Video Components
to the Video Filter ................................................. 7
Step 3 Connect Audio Components
to the Audio Filter ................................................. 8
Step 4 Connect High-Current Audio Filter
(Delayed) ................................................................. 9
Step 5 Connect your Pay-Per-View/Phone Line ......... 10
Step 6 Connect your Coaxial-Cable/DSS Lines ........... 11
Step 7 Connect your Broadband Ethernet Line ......... 12
Operation ....................................................................................... 13
Troubleshooting ............................................................................ 14
Glossary of Power Terms ............................................................ 15
Belkin Connected Equipment Warranty .................................... 16
Introduction
PureAV Power Console
Thank you for purchasing the PureAV Power Console PF30. The Power
Console is designed to clean, protect, and efficiently distribute power to
your valuable home theater system. The PureAV Power Console ensures
that every movie you watch and every album you hear is as clean and
clear as possible.
The Power Console is packed with innovative features to provide you with
the best home theater experience. Ordinary household AC power that is
delivered to your home is polluted with “noise” from many sources within
your home, including digital components and household appliances. The
Power Console’s advanced Phase 3 PureFilter Circuitry is optimized to
remove electrical noise and provide clean and clear power to all of your
valuable audio, video, and high-current equipment. The multiphase PureFilter
Circuitry also provides true isolation between audio, video, and high-
current components. This isolation prevents noise created by components
that are already connected to the Power Console from contaminating
other connected equipment. In addition, the Power Console contains
Advanced Overvoltage Protection, which automatically disconnects power
from your equipment when the input voltage reaches a dangerous level,
and restores power automatically when the voltage returns to a safe level.
We also realize that the aesthetics of your system are very important. For
this reason we enlisted some of the top industrial designers in the country
to design the housing for the PureAV Power Console. The minimalist
styling of the Power Console combines function with a simplistic yet
elegant design and is a great complement to any system.
As you may know, your AC power source is not the only threat to the
safety of your equipment. This is why the PureAV Power Console has two
sets of coaxial connections to protect your coaxial-cable lines. The Power
Console also includes telephone jacks to protect Pay-Per-View lines and
broadband Ethernet jacks to protect data lines that stream digital content
to your home theater system.
Providing the ultimate home theater experience is the driving force behind
the PureAV brand, providing the clearest picture and cleanest sound from
your components to you. Thank you again for purchasing the PureAV
Power Console PF30.
Clear Picture – Clean Sound. PureAV.
2
PureAV Power Console
Safety Precautions
Warning – Grounding and Polarization
This product must be plugged directly into a grounded AC power outlet
(3-prong). Do not use a 3-to-2-prong adapter to defeat the grounding pin.
Do not plug or “daisy-chain” this product into other electrical products
such as surge protectors, power strips, or UPSes. Do not plug this product
into an extension cord. Failure to plug this product directly into a grounded
outlet may result in personal injury or damage to your equipment. Call a
licensed electrician if you are unsure if your AC outlets are properly grounded.
Warning – Rooftop Antennas and Satellite Dishes
If you use rooftop antennas, satellite dishes, or any other rooftop hardware
that connects to your PureAV Power Console, make sure that all the wires
leading from these components are properly grounded. This will protect
against voltage surges from lightning strikes or static charges.
Warning – Lightning Storm Protection
Although your PureAV Power Console is built to withstand large power
surges, we cannot guarantee that it will protect all of your equipment in
the event of a large lightning storm. In the event of a lightning storm, it
is best to unplug your Power Console from the wall. Once you have done
this, there is no need to unplug any of the equipment that is connected
to the Power Console.
Warning – Water and other Liquids: Shock Hazard
Do not use this product with aquariums or other water-related products.
Use indoors and in dry locations only. Do not operate the Power Console
if any liquid is spilled on or in the unit. Failure to follow these guidelines
could result in serious bodily injury or death.
Warning – Cleaning
Always unplug the Power Console before cleaning. It is only necessary to
clean the Power Console with a clean, dry cloth or duster. Do not use any
cleaning solutions, sprays, or water.
Warning – No User-Serviceable Parts Inside
If for any reason your Power Console is malfunctioning, do not attempt
to repair or dismantle the unit in any way. Unplug the unit and consult
this User Manual for warranty and service contact information.
Warning – Power Cord Safety
Do not route the Power Console’s AC power cord near heat sources.
This could damage the power cord and cause it to malfunction, creating
a shock hazard.
Do not route the Power Console’s AC power cord in heavy foot-traffic areas
where it could create a trip hazard (hallways, doorways, across room).
If the power cord is frayed, ripped, cut, or damaged in any way, please
discontinue use immediately and refer to the warranty section of this
Manual for instructions.
3
Package Contents
PureAV Power Console
•User Manual
•PureAV Power Console PF30
•RJ45 Ethernet Patch Cable – For broadband connectivity
•RJ11 Phone Cable
•PureAV Coaxial Video Cable
•One sheet of PureAV cable labels
•One pair of rack-mount brackets and bag of assembly screws
•Warranty registration card
4
PureAV Power Console
Power Console Features
5
1. Switched button – turns the power on and off to the Power Console’s
“switched” outlets
2. Central LED Display – monitors the Power Console’s vital functions
3. Video Filter – ensures optimum reduction of line noise and
interference to your video components
4. Audio Filter – ensures optimum reduction of line noise and
interference to your audio components
5. HiCurrent™ Filter – delivers high current to power-hungry amplifiers
and receivers; optimized to filter out line noise to these components
6. Pay-Per-View/Phone Line Input/Output – protects Pay-Per-View,
phone, or DSL lines from dangerous power surges that can damage
your equipment; built-in splitter turns one line into two
7. Coaxial-Cable Line Input/Output – protects your system from
dangerous electrical disturbances that can travel down your coaxial-
cable lines
8. Broadband Ethernet Input/Output – protects broadband Ethernet
lines used for digital media receivers, gaming or broadband Internet
access from dangerous power surges
9. 15-Amp Circuit Breaker – offers safety of resettable circuit breaker
10. Ground – provides a grounding point for ungrounded components
1 2
8543
9
10
76
Hookup & Installation
PureAV Power Console
Step 1 (optional)
Mounting your Power Console
The PureAV Power Console can be mounted to a standard AV equipment
rack or inside a cabinet equipped with an equipment rack.
A. Remove the brackets and mounting screws from the box.
B. Make sure that the Power Console is unplugged.
C. Align the bracket with the front of the Power Console for flush
installation in the rack.
D. Attach the bracket to the side of the Power Console with the screws
provided (Fig. 1). You must use a minimum of four screws to mount
each bracket.
E. Repeat steps C and D for installation of the bracket to the other side of
the Power Console.
F. Mount the Power Console to the equipment rack. Screws for mounting
the Power Console to the equipment rack are not provided as they are
made specifically for the particular equipment rack that you own.
Contact the manufacturer of the rack if you do not have the correct
mounting screws.
6
Figure 1
PureAV Power Console
Hookup and Installation
Step 2
Connect Video Components to the Video Filter
The PureAV Power Console Model PF30 contains an isolated Video Filter
that is optimized to clean and condition the power to all of your video
components. The video filter also isolates your video components from
connected audio and high-current audio components. The Video Filter
outlets are “Always ON” when the Power Console is plugged into a live AC
outlet.
A. Attach PureAV power cord labels to each component’s power cord
before you plug the cord into the corresponding outlet on the Power
Console.
B. VCR – Connect your VCR power cord to the outlet labeled “VCR”.
C. DVD – Connect your DVD power cord to the outlet labeled “DVD”.
D. Cable/Satellite – Connect your cable or satellite receiver power cord
to the outlet labeled “Cable/SAT”.
E. TV – Connect your TV or monitor power cord to the outlet labeled
“TV/Monitor”.
Note: You can connect any type of video component into any of the Video
Filter outlets. You are not limited to the components listed above.
7
Hookup and Installation
PureAV Power Console
Step 3
Connect Audio Components to the Audio Filter
The PureAV Power Console Model PF30 contains an isolated Audio Filter
that is optimized to clean and condition the power to all of your audio
components. The audio filter also isolates your audio components from
connected video and high-current audio components. The Audio Filter
outlets are “Switched” and are controlled by the “Switched” button on the
front of the Power Console.
A. Attach PureAV power cord labels to each component’s power cord before
you plug the cord into the corresponding outlet on the Power Console.
B. Tape – Connect your tape player power cord to the outlet labeled “Tape”.
C. CD – Connect your CD player power cord to the outlet labeled “CD”.
D. Receiver (Preamp) – Connect your receiver or preamp power cord to
the outlet labeled “Receiver”.
Note: You can connect any type of audio component into the Audio
Filter outlets. You are not limited to the components listed above.
8
PureAV Power Console
Hookup and Installation
9
Step 4
Connect High-Current Audio Filter (8 second delay)
This outlet is specifically designed to filter out AC line noise while
delivering maximum current to power-hungry amplifiers and other high-
current audio components. The High-Current outlet is also equipped with
an 8 second delay. This allows your high-current amplifier to turn on last
and turn off first, avoiding that annoying “thump” from getting to your
speakers and potentially damaging them. The High-Current outlet is
“Switched” and is controlled by the “Switched” button on the front of the
Power Console.
A. Attach PureAV power cord labels to each component’s power cord
before you plug the cord into the corresponding outlet on the Power
Console.
B. AMP - Connect your main amplifier power cord to the outlet labeled
“AMP-delay”.
Note: You can connect any type of high-current audio component into
the High-Current outlet. You are not limited to the components
listed above.
Otros manuales para PureAV PF30
2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Unidad de distribución de energía de Belkin
Belkin
Belkin AP41300fc12-BLK Manual de usuario
Belkin
Belkin PureAV PF30 Manual de usuario
Belkin
Belkin AP41300f Manual de usuario
Belkin
Belkin PureAV PF30 Manual de usuario
Belkin
Belkin P74978UKAP21000UK3M Manual de usuario
Belkin
Belkin PUREIAV PF31 Manual de usuario
Belkin
Belkin P74977UKAP20500UK3M Manual de usuario
Belkin
Belkin PureAV Power Console PF60 Manual de usuario
