Belkin ErgoFit P74278 Manual de usuario

All trade names are registered trademarks of respective manufacturers listed.

P74278

Belkin Components B.V.

Starparc Building • Boeing Avenue 333

1119 PH Schiphol-Rijk • The Netherlands

Tel: +31 (0) 20 654 7300

Fax: +31 (0) 20 654 7349

Belkin Components, Ltd.

Express Business Park • Shipton Way

Rushden • NN10 6GL • United Kingdom

Tel: +44 (0) 1933 35 2000

Fax: +44 (0) 1933 31 2000

Belkin Corporation

501 West Walnut Street

Compton • CA • 90220 • USA

Tel: 310.898.1100

Fax: 310.898.1111

Belkin, Ltd.

7 Bowen Crescent • West Gosford

NSW 2250 • Australia

Tel: +61 (0) 2 4372 8600

Fax: +61 (0) 2 4372 8603

Belkin Tech Support

US: 310.898.1100 ext. 2263

800.223.5546 ext. 2263

Europe: 00 800 223 55 460

Australia: 1800 666 040

F8E826-OPT

User Manual

ErgoFit™Wireless

Optical Mouse

Experience advanced functionality

with wireless freedom

TABLE OF CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Connecting the USB Mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Connecting the PS/2 Mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Synchronizing your Mouse to your Receiver . . . . . . . . . . . . . . . . .6

Setting your Mouse to ID Mode . . . . . . . . . . . . . . . . . . . . . . . . .6

Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Using the Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Software Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

INTRODUCTION

Congratulations and thank you for purchasing the ErgoFit Wireless

Optical Mouse from Belkin. You are about to experience a whole new

world of computing convenience with superior input features and

navigating accuracy. The ErgoFit works from up to six feet away

without a cord, giving you unencumbered freedom of movement. It

provides five customizable buttons, including the convenient scroll

wheel, to make repetitive tasks simpler than ever.

Please read through this entire manual to ensure the safe, long-term

use of your ErgoFit Wireless Optical Mouse, and for help in getting

the most from its advanced features.

OVERVIEW

Before starting the installation of the hardware and software for the

ErgoFit Wireless Optical Mouse, please remove any drivers or software

from any mice that were previously installed on your computer.

This is to avoid any conflicts they may create, which could result in

an improper installation of your new ErgoFit Wireless Optical Mouse.

Please consult the documents that came with your previous mouse

for proper instructions on how to uninstall the software and drivers.

HARDWARE INSTALLATION

IMPORTANT: Before connecting your mouse or installing the software,

be sure to identify the type of mouse port you are using (USB or

PS/2). Refer to the diagrams below if you have difficulty determining

which kind of port your mouse uses.

PS/2 Port USB Port

IMPORTANT: Do not install the software until the mouse is connected

to your computer. If you have not yet connected the mouse, please

follow the Hardware Installation instructions.

NOTE: Your mouse is functional without installing the software.

However, we recommend software installation because the software

allows you to program the mouse buttons for various functions, adding

personalized efficiency and enjoyment to your computing experience.

HARDWARE INSTALLATION

Connecting the USB Mouse

USB in Windows®98, Me, 2000, and XP

1. Make sure your computer is turned on before installing the mouse.

2. Check “Add/Remove Program” in your control panel for any

programs from your previous mouse. If you have anything

installed for your old mouse, please un-install before continuing.

3. Connect the receiver to an available USB port on your computer.

4. A New Hardware Wizard will start automatically.

NOTE: In Windows Me and XP, the New Hardware Wizard will complete

the installation automatically. In Windows 98 and 2000, you will need

to go through the Hardware-Wizard process, clicking the appropriate

prompts as necessary. Windows 98 may also require you to insert your

Windows 98 Installation CD into your computer to complete the install.

5. When your installation is complete, insert the batteries

into the mouse and the mouse should sync up with the

receiver automatically.

NOTE: If the mouse does not sync up with the receiver

automatically, please see instructions titled “Synchronizing

your Mouse to your Receiver”.

6. When your mouse is properly connected and functioning as a

standard mouse, you can start the software installation for the

extra button features.

HARDWARE INSTALLATION

Connecting the PS/2 Mouse

PS/2 in Windows 98, Me, 2000, and XP

1. Turn off your computer.

2. Connect the USB-to-PS/2 connector to the mouse cable

on the receiver.

3. Insert the cable with the connector to the PS/2 (6-pin)

mouse port on your computer.

4. Place the batteries into the mouse.

5. Turn the computer on.

6. When the computer finishes starting up, it will automatically

detect the mouse and make it functional.

NOTE: If the mouse does not work, please see instructions under

“Synchronizing your Mouse to your Receiver”.

7. When your mouse is properly connected, you can start the

software installation.

Synchronizing your Mouse to your Receiver

If the mouse does not automatically sync with the receiver, hold the

button on the receiver down for three seconds.This will put the

receiver into a non-ID (default) mode that is optimal when there is

only one mouse and receiver present. You can confirm that you are in

non-ID mode by checking the dim-light indicator on the receiver. If

the LED on the receiver is dimly lit, you are in non-ID mode. If the

light is off, try setting the non-ID mode again by holding the button

down for three seconds.

NOTE: If you have more than one ErgoFit Wireless Optical Mouse in the

immediate area, you will have to change the receiver from non-ID to ID

mode in order to eliminate interference. If you do not change to ID

mode, you may experience cross talk with another wireless mouse,

which will impede your mouse’s operation.

Setting your Mouse to ID Mode

1. To set the mouse to ID mode, push the button on the receiver

for one second only. The light on the receiver will light brightly.

2. Then sync the mouse to the receiver by pushing the sync button

on the bottom of the mouse. Wait three to five seconds. The light

on the receiver will go out and the mouse should now work

properly.

NOTE: Each time you follow these steps, the mouse will switch between

channel 1 and channel 2 and randomly select a new ID. This allows

multiple wireless mice to work in the same location without cross talk.

If you experience cross talk with another wireless mouse, follow these

steps to select a new ID.

HARDWARE INSTALLATION

SOFTWARE INSTALLATION

IMPORTANT: Do not install the software until the mouse is

connected to your computer. If you have not yet connected the

mouse, please follow the Hardware Installation instructions.

If your mouse is not functional after following the Hardware

Installation instructions, please consult the Troubleshooting

section for assistance.

NOTE: Your mouse is functional without installing the software.

However, we recommend software installation because the

software allows you to program the mouse buttons for various

functions, adding personalized efficiency and enjoyment to your

computing experience.

1. Insert the CD into your computer.

2. The computer will automatically detect the CD and begin

installing the software.

3. Follow the on-screen instructions to complete the installation.

NOTE: If the computer does not automatically detect the CD,

do the following:

1. Click the “Start” button and then select “Run”.

2. From the Run dialog box, enter “<drive>: Setup” and click “OK”.

(<drive> being the letter of the drive that identifies your

CD-Rom drive under “My Computer”. For example, if the CD

is in drive D, enter “D:\Setup”.

3. Follow the on-screen instructions.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Ratón de Belkin

Belkin

Belkin NETMASTER P73137 Manual de usuario

Belkin

Belkin F8T041-B Manual de instrucciones

Belkin

Belkin P74279ea Manual de usuario

Belkin

Belkin F5L075USB Manual de usuario

Belkin

Belkin F8T041-B Manual de usuario

Belkin

Belkin MiniScroller F8E841-BLK Manual de usuario

Belkin

Belkin COMFORT MOUSE Manual de usuario

Belkin

Belkin MiniWireless F8E874 Manual de usuario

Belkin

Belkin AeroCruiser F8E888 Manual de usuario

Belkin

Belkin F8E850-OPT - Optical Mouse Manual de usuario

Belkin

Belkin MiniWireless F8E874 Manual de usuario

Belkin

Belkin ErgoMouse F8E203-BLK Manual de usuario

Belkin

Belkin F8E845ea Manual de usuario

Belkin

Belkin NetMaster F8E204 Manual de usuario

Belkin

Belkin F8E825-USB Manual de usuario

Belkin

Belkin F8E729 Manual de usuario

Belkin

Belkin F8E825-USB Manual de usuario

Belkin

Belkin ClassicMouse F8E201-BLK Manual de usuario

Belkin

Belkin ClassicMouse F8E201 Manual de usuario

Belkin

Belkin F8E857 Manual de usuario

Belkin

Belkin NOSTROMO N30 Manual de usuario

Belkin

Belkin COMFORT MOUSE Manual de usuario

Belkin

Belkin F8E800 series Manual de usuario

Belkin

Belkin F8E845 Manual de usuario

Manuales populares de Ratón de otras marcas

Sven

Sven RX-G720 Manual de usuario

3DConnexion

3DConnexion CadMouse Pro Manual de usuario

Canyon

Canyon Puncher GM-20 Manual de usuario

Sharkoon

Sharkoon Light2 180 Manual de usuario

Cherry

Cherry MW 8C ERGO Manual de usuario

NGS

NGS HIT RB Manual de usuario

Sharkoon

Sharkoon FireGlider Manual de usuario

Lenovo

Lenovo Wireless Mouse N3902 Manual de usuario

BASETech

BASETech BN-S11 Manual de usuario

Dell

Dell WM326 Manual de usuario

Areson

Areson B213 Manual de usuario

HP M17587-371 Manual de usuario

Chatpen

Chatpen CHA-30 Manual de usuario

GAMDIAS

GAMDIAS DEMETER GMS5000 Manual de usuario

HP KJ453AA - Wireless Laser Mouse Manual de usuario

Trust

Trust GRAPHIN GXT 960 Manual de usuario

Lenovo

Lenovo SD-9082 Manual de usuario

Alienware

Alienware AW320M Manual de usuario